+ Item code partial matches (1629)
7860
Bird-proof braid, 304 stainless steel, 6mm I.D, suits RG58, RG59 or RG142 - per metre
7860 coaxial cable bird-proof stainless steel braid is suitable for use on RG58 or RG59 cables for protection against bird or environmental damage. ZCG recommend the use of stainless steel cable ties to secure the braid-proof braid.
7860-1
Bird-proof braid, 304 stainless steel, 3mm I.D, suits RG316 or RG174 - per metre
7860-1 coaxial cable bird-proof stainless steel braid is suitable for use on RG316 or RG174 cables for protection against bird or environmental damage. ZCG recommend the use of stainless steel cable ties to secure the braid-proof braid.
7860-10
Bird-proof braid, 304 stainless steel - 59.3mm I.D. - Per Metre
7860-10 coaxial cable bird-proof stainless steel braid is suitable for protection against bird or environmental damage. ZCG recommend the use of stainless steel cable ties to secure the braid-proof braid.
7860-2
Bird-proof braid, 304 stainless steel, 10mm I.D. suits RG213, RG214, RU400 & RU400-75 - per metre
7860-2 coaxial cable bird-proof stainless steel braid is suitable for use on RG213, RG214, RU400, RU400-75 and ZCG1450 cables for protection against bird or environmental damage. ZCG recommend the use of stainless steel cable ties to secure the braid-proof braid.
7860-3
Coaxial Cable Bird-Proof Braid, Stainless Steel - 20mm I.D. - Per Metre
7860-3 coaxial cable bird-proof stainless steel braid is suitable for use on ZCG7850 7/8" cable for protection against bird or environmental damage. ZCG recommend the use of stainless steel cable ties to secure the braid-proof braid.
7860-4
Bird-proof braid, 304 stainless steel, 32mm I.D. suits ZCG7850 - per metre
7860-4 coaxial cable bird-proof stainless steel braid is suitable for use on ZCG7850 cables for protection against bird or environmental damage. ZCG recommend the use of stainless steel cable ties to secure the braid-proof braid.
7860-5
Coaxial Cable Bird-Proof Braid, Stainless Steel - 38mm I.D. - Per Metre
7860-5 coaxial cable bird-proof stainless steel braid is suitable for use on maximum 38mm O.D. cable for protection against bird or environmental damage. ZCG recommend the use of stainless steel cable ties to secure the braid-proof braid.
7860-6
Bird-proof braid, 304 stainless steel, 50mm I.D. suits ZCG1580 - per metre
7860-6 coaxial cable bird-proof stainless steel braid is suitable for use on 1-5/8" ZCG1580 cable for protection against bird or environmental damage. ZCG recommend the use of stainless steel cable ties to secure the braid-proof braid.
7860-7
Coaxial Cable Bird-Proof Braid, Stainless Steel - 25mm I.D. - Per Metre
7860-7 coaxial cable bird-proof stainless steel braid is suitable for use on maximum 25mm O.D. cable for protection against bird or environmental damage. ZCG recommend the use of stainless steel cable ties to secure the braid-proof braid.
7860-8
Bird-proof braid, 304 stainless steel - 12mm I.D. - per metre
7860-8 coaxial cable bird-proof stainless steel braid is suitable for protection against bird or environmental damage. ZCG recommend the use of stainless steel cable ties to secure the braid-proof braid.
7860-9
Bird-proof braid, 304 stainless steel, 16mm I.D. suits ZCG1250 & ZCG1250SF - per metre
7860-9 coaxial cable bird-proof stainless steel braid is suitable for use on 1/2" ZCG1250 or ZCG1250SF cable for protection against bird or environmental damage. ZCG recommend the use of stainless steel cable ties to secure the braid-proof braid.
S24-PAA
Bird-Proof Free-Standing Spike Strip - 25mm x 500mm
The S24-PAA bird-proofing spike strips are the ideal solution for bird-proofing antennas, roofing, ledges or any flat surface with minimum 25mm width. The spikes are able to be configured to your requirement with easily snap fitted spikes. Each S24-PAA section comes with 15 sets of double spikes. To mount the S24-PAA ...
A-6211
Fascia or Wall Lightweight 'L' Mount Bracket - 16mm hole
Mount the A-6211 to your wall or fascia using the 2 x 6mm mount holes. Mount your antenna to the bracket using the 16mm hole.
CFB1100
Fascia or Wall 'Hockey Stick' Mount Bracket, Galvanised Steel - 1100mm
Mount the CFB1100 using the 12mm slot or holes located on the base plate.
CFB1800
Fascia or Wall 'Hockey Stick' Mount Bracket, Galvanised Steel - 1800mm
Mount the CFB1800 using the 12mm slot or holes located on the base plate.
CFB2400
Fascia or Wall 'Hockey Stick' Mount Bracket, Galvanised Steel - 2400mm
Mount the CFB2400 using the 12mm slot or holes located on the base plate.
CFB2700
Fascia or Wall 'Hockey Stick' Mount Bracket, Galvanised Steel - 2700mm
Mount the CFB2700 using the 12mm slot or holes located on the base plate.
PDC-L
Power Divider Clamp, Large, Stainless Steel PD Dia. 40mm
The PDC-L large power divider mount clamp is specifically designed for mast mounting the entire range of medium power ZCG power dividers safely and securely without damaging the power divider. Constructured from all stainless steel components the PDC-L is designed for long service life with minimal maintenance. Mount ...
PDC-S
Power Divider Clamp, Small, Stainless Steel - PD Dia. 25mm
The PDC-S power divider mount clamp is specifically designed for mast mounting the entire range of low power ZCG power dividers safely and securely without damaging the power divider. Constructured from all stainless steel components the PDC-S is designed for long service life with minimal maintenance. Mount the ...
A48
Right-angle Medium Duty Yagi Clamp, Aluminium - suits 30-50mm pole, 25mm square
A48-65
Right-Angle Medium Duty Yagi Clamp, Aluminium - suits 50-60mm pole, 25mm square
Stainles steel plate clamp to suit 60mm poles.
A48-65-AM
Right-Angle Medium Duty Circular Polarised Yagi Clamp, aluminium - suits 50-65mm pole
A48-AM
Right-Angle Medium Duty Circular Polarised Yagi Clamp, Aluminium - suits 30-50mm pole, 25mm square
A48-tilt
Right-Angle Medium Duty Down-tilt Clamp, Aluminium - suits 30-50mm pole, 25mm square
A48-tilt bracket allows for down tilt of your Yagi using the extended slots in the bracket.
RB8
Right-angle Mounting Clamp, Galvanised Steel
To suit 20 - 40 mm and 20-50mm tube, fully galvanised
RB8-L
Right-Angle Light Duty Clamp, electroplated Steel - suits dia. 20-50mm pole
Light weight 90 degree clamp,
S48
Right-Angle Medium Duty Clamp, Stainless steel - suits dia. 30-50mm pole
S48-76
Right-Angle Medium Duty Clamp, Large, Stainless Steel - suits dia. 50-76mm pole
Large 60-70mm plate clamp for square boomed Yagis and antennas.
S48-90
Right-Angle Medium Duty Clamp, Large, Stainless steel - suits dia. 70-90mm pole
S48-AM
Right-Angle Circular Polarised Yagi Clamp, Stainless steel - suits dia 30-50mm pole
S48-Tilt
Right-Angle Medium Duty Clamp, Stainless steel - suits dia. 30-50mm pole
15 Tilt bracket
UAM90L
Right-Angle Heavy Duty Clamp, Galvanised Steel - suits dia 40-75mm pole
UAM90LL
Right-Angle Heavy Duty Clamp, Large, Galvanised Steel - suits dia 60-115mm pole
UAM90UNI
Right-Angle Heavy Duty Clamp, Galvanised Steel - suits dia. 40-90mm pole
UB1-SS
Right-Angle Medium Duty Clamp, Stainless Steel - suits dia 50mm max. pole
UB2-SS
Right-Angle Medium Duty Clamp, Stainless Steel - suits dia. 20-50mm pole
Y2300
Right-Angle Heavy Duty Clamp, Galvanised Steel - suits dia 30-50mm pole
Y2300-L
Right-Angle Heavy Duty Clamp, Large, Galvanised Steel - suits dia. 40-75mm pole
Y2300-SS
Right-Angle Heavy Duty Clamp, Stainless Steel - suits dia. 32-50mm pole
Y2300SS-L
Right-Angle Heavy Duty Clamp, Large, Stainless Steel - suits dia. 30-70mm pole
Heavy duty mounting clamp for 70mm to 50mm mounting. V blocks supplied for 50mm mounting only.
Y2300SS-XL
Right-Angle Heavy Duty Clamp, Extra Large, Stainless Steel - suits dia 60-90mm pole
2366
Stand-off mount bracket, aluminium - 872mm stand-off, suits 50mm mast or tower
2366-2
Stand-off mount bracket, stainless steel - 872mm stand-off, suits 50mm mast or tower
SPB
Stand-off Pole Bracket, Galvanised Steel - specify diameter, 300mm stand-off
SPB-1000
Stand-off Bracket, Galvanised Steel - 600mm diameter, 1.0m Stand-off
SPB-300
Stand-off Pole Bracket, Galvanised Steel - 300mm diameter, 300mm Stand-off
SPB-400
Stand-off Pole Bracket, Galvanised Steel - 400mm diameter, 100mm Stand-off
SPBC-300
Stand-off bracket, galvanised steel - 300mm stand-off
This standoff pole bracket is designed to be attached via the 3mtr chain, will fit all pole diameters. Pole not included
SWB-400K
Stand-off Wall Bracket Kit, Galvanised Steel - 2 x 400mm Stand-off Brackets
SWB-550K
Stand-off Wall Bracket Kit, Galvanised Steel - 2 x 550mm Stand-off Brackets
SWB-900K
Stand-off Wall Bracket Kit, Galvanised Steel - 2 x 900mm Stand-off Brackets
WMB-L
Stand-off Wall Mount Bracket, Stainless Steel - 30mm Stand-off, suits dia. 70-80mm pole
Mount the WMB-L using the 4 x 9mm mounting holes
WMB-RA
Right-Angle Wall Mount Bracket, Stainless Steel - 25mm Stand-off, suits 50-55mm pole
Mount the WMB-RA using the 2 x 7mm slots on the base plate.
WMB-S
Stand-off Wall Mount Bracket, Stainless Steel - 25mm Stand-off, suits 50-65mm pole
Mount the WMB-S using the 4 x 9mm mount holes on the base.
WMB-SE
Stand-off Wall Mount Bracket, Stainless Steel - 25mm Stand-off, suits 50-65mm pole
Mount the WMB-SE using the 4 x 9mm mount holes located on the base.
WMB-XL
Stand-off Wall Mount Bracket, Stainless Steel - 30mm Stand-off, suits 70-83mm pole
Mount the WMB-XL using the 4 x 9mm mount holes on the base.
EB1-SS
Parallel Medium Duty Clamp, Stainless Steel - suits 30-45mm pole
Parrel clamp for 30 to 45mm pole to 30 to 40mm boom.
UAM180L
Parallel Heavy Duty Clamp, Galvanised Steel - suits dia. 40-75mm pole
UAM180UNI
Parallel Heavy Duty Clamp, Galvanised Steel - suits dia. 40-90mm pole
UAM180UNIL
Parallel Heavy Duty Clamp, Galvanised Steel - suits dia. 60-115mm pole
UAM180UNIL-42
Parallel Heavy Duty Clamp, Galvanised Steel - suits dia. 60-115mm pole
UB3-SS
Parallel Medium Duty Clamp, Stainless Steel - suits dia. 20-50mm pole
SB-40-1
Strut clamp Kit, Stainless Steel - 1 Lug, suits 40mm boom
The SB-40-1 suits any antenna with a 40mm boom using a single or 2-way tension strut kit.
SB-40-2
Strut Clamp Kit, Stainless Steel - 2 Lugs, suits 40mm boom
The SB-40-2 suits any antenna with a 40mm boom using a single or 2-way tension or compression strut kit.
SB-50-1
Strut Clamp Kit, Stainless Steel - 1 Lug, suits 50mm boom
The SB-50-1 suits any antenna with a 50mm boom using a single or 2-way tension strut kit.
UV1
Galvanised U bolt and V block , 50mm inside capability
The UV-1 galvanised 50mm inside capability U-bolt clamps can be used to mount the end of your tension or compression strut kit to your structure or tower.
UV1-SS
Stainless steel strut clamp, suits single up to 3-way strut kit - 50mm inside capability
The UV1-SS stainless steel U-bolt and V-Block strut clamp is suitable for single or up to 3-way tension strut kits. The inner capability of the U-bolt allows for up to a 50mm mounting pole. Suitable for tension strut kits only, if using a compression strut kit, please contact ZCG sales team for a solution for your ...
UV4
Galvanised U-bolt and V-block clamp - 60mm internal capability
The UV4 galvanised 60mm inside capability U-bolt clamps can be used to mount the end of your tension or compression strut kit to your structure or tower.
UV6
Galvanised V-block and bolt clamp - 38mm internal capability
The UV6 consists of 2 galvanised steel V-blocks and 2 galvanised steel bolts, allowing for an internal capability of 38mm. This clamp can be used as a securing point for your compression or tension strut.
YB-25
Yagi Strut Mount, Stainless Steel - suits 25mm square
The YB-25 Yagi strut mount suits all square boom Y400, Y600 or Y800 series for single or 2-way strut kits
YB-25-P50
Yagi Strut Mount, Stainless Steel - suits 25mm square
The YB-25-P50 Yagi strut mount suits all square boom Y400, Y600 or Y800 series using a UV1-SS or U-bolt strut attachment
8258-2
Dummy Load, Small Heatsink - 5 Watts
The purpose of a dummy load or termination load is to absorb energy and convert it to heat. The dummy loads are there to replace the antenna during transmitter testing and adjustment. The 8258-2 is a N-type Male Dummy load. Operating Temperatures -40°C to +85°C.
8258-5
7/16 Male Dim Dummy Load
DC to 3 GHz, 7/16 Din Male connector, 30 watt Dunmmy load
8258-6
50 watts 7/16DIN dummy load
IP66 Rated dummy load, 50 watts, -45 to +85 deg C, operating Temperature. Tri metal plated connector.
8258-7
100 watt Dummy termination
Wide operating frequency range with low VSWR, the 100 watt 7/16 male din load has excellent capacity in anti pulse and anti burnout ability.
8259
Dummy Load, Large Heatsink - 25 Watts
The purpose of a dummy load or termination load is to absorb energy and convert it to heat. The dummy loads are there to replace the antenna during transmitter testing and adjustment. The 8259 is a N-type Male Dummy load. Operating Temperatures -40°C to +85°C.
8260
Dummy Load, Large Heatsink - 60 Watts
The purpose of a dummy load or termination load is to absorb energy and convert it to heat. The dummy loads are there to replace the antenna during transmitter testing and adjustment. The 8260 is a N-type Male Dummy load. Operating Temperatures -40°C to +85°C.
HBC3
UHF Hybrid Coupler - 400-570MHz, 50-50 coupling ratio
The HBC3 hybrid coupler splits the input signal between two output ports, or combine two signals whilst maintaining high isolation between them. The HBC3 offers 3dB or 50-50 coupling ratio. The HBC3 comes standard with N-type female input and output ports and a N-type male small heatsink dummy load or termination load ...
HBC6
UHF Hybrid Coupler - 400-570MHz, 75-25 coupling ratio
The HBC3 hybrid coupler splits the input signal between two output ports, or combine two signals whilst maintaining high isolation between them. The HBC3 offers 3dB or 50-50 coupling ratio. The HBC3 comes standard with N-type female input and output ports and a N-type male small heatsink dummy load or termination load ...
AV-SW2M
AV-SW2M coaxial antenna switch, 3 x SO239
Ideal for 4WD with two antennas, one on roof and one on Bullbar. Designed for the VHF band with SO239 female out puts.
AV-SW2N
2-way N-type female coaxial antenna switch
Designed to manually switch between 2 antennas, covers Frequency DC to 3 GHz. Suitable for any situation where 2 antennas in different locations ie. on vehicles roof and bullbar.
AV1000
VHF & UHF Power and SWR Meter, Avair - 1.4-1300MHz
The AVAIR AV1000 power and SWR meter is suitable for testing of your vehicle or marine mounted antennas to check or tune the performance of your antenna once installed. The AV1000 is suitable for both VHF and UHF tuning with a range of power handling capabilities.
AV200
VHF Power and SWR Meter, Avair - 1.8-160MHz
The AVAIR AV200 power and SWR meter is suitable for testing of your vehicle or marine mounted antennas to check or tune the performance of your antenna once installed. The AV200 is suitable for VHF tuning with a range of power handling capabilities.
AV400
VHF & UHF Power and SWR Meter, Avair - 1.8-160MHz
The AVAIR AV400 power and SWR meter is suitable for testing of your vehicle or marine mounted antennas to check or tune the performance of your antenna once installed. The AV400 is suitable for both VHF and UHF tuning with a range of power handling capabilities.
A-8450-2
Galvanised steel guy wire anchor plate - suits 38mm mast
The A-8450-2 galvanised steel guy wire anchor plate is designed for use on a 38mm mast for anchoring guy wires to strengthen or support your mast.
A-8451
Guy Wire locking ring, use with A-8450-2 plate - 38mm mast
The A-8451 locking ring works in partnership with the A-8450-2 anchor plate and allows the guy wires and anchor plate to rotate freely around the mast. The A-8451 is deisgned for use on a 38mm diameter mast.
RL1501
Parafil Rope Termination, Aluminium - Suits 7mm RL1002
The RL1501 parafil guy rope termination is designed for use with RL1002 7mm non-conductive guy rope to maximum efficiency and 0.5 tonne nominal break load.
RL1502
Parafil Rope Termination, Aluminium - Suits 8.5mm RL1003
The RL1502 parafil guy rope termination is designed for use with RL1003 8.5mm non-conductive guy rope to maximum efficiency and 1.0 tonne nominal break load.
RL1503
Parafil Rope Termination, Aluminium - Suits 11mm RL1004
The RL1502 parafil guy rope termination is designed for use with RL1003 8.5mm non-conductive guy rope to maximum efficiency and 2.0 tonne nominal break load.
RL1521
Parafil Rope Termination, Galvanised Steel - Suits 7mm RL1002
The RL1521 parafil guy rope termination is designed for use with RL1002 7mm non-conductive guy rope to maximum efficiency and 0.5 tonne nominal break load.
RL1523
Parafil Rope Termination, Galvanised Steel - Suits 11mm Type A RL1004
The RL1523 parafil guy rope termination is designed for use with RL1004 Type A 11mm non-conductive guy rope to maximum efficiency and 2.0 tonne nominal break load.
RL1524
Parafil Rope Termination, Galvanised Steel - Suits 13.5mm Type A RL1005
The RL1524 parafil guy rope termination is designed for use with RL1005 Type A 13.5mm non-conductive guy rope to maximum efficiency and 3.5 tonne nominal break load.
RL1541
Parafil Rope Termination, Stainless Steel - Suits 7mm RL1002
The RL1541 parafil guy rope termination is designed for use with RL1002 7mm non-conductive guy rope to maximum efficiency and 0.5 tonne nominal break load.
RL1542
Parafil Rope Termination, Stainless Steel - Suits 8.5mm RL1003
The RL1542 parafil guy rope termination is designed for use with RL1003 Type A 8.5mm non-conductive guy rope to maximum efficiency and 1.0 tonne nominal break load.
RL1543
Parafil Rope Termination, Stainless Steel - Suits 11mm RL1004
The RL1543 parafil guy rope termination is designed for use with RL1004 11mm non-conductive guy rope to maximum efficiency and 2.0 tonne nominal break load.
RL1544
Parafil Rope Termination, Stainless Steel - Suits 13.5mm RL1005
The RL1544 parafil guy rope termination is designed for use with RL1005 13.5mm non-conductive guy rope to maximum efficiency and 3.5 tonne nominal break load.
RL1002
Parafil Non-Conductive Guy Rope - 7mm
Parafil non-conductive guy rope is a parallel laid fibre synthetic rope designed for high strength, excellent tension-tension performance with low creep. Nominal Break Load = 0.5 tonnes
RL1003
Parafil Non-Conductive Guy Rope - 8.5mm
Parafil non-conductive guy rope is a parallel laid fibre synthetic rope designed for high strength, excellent tension-tension performance with low creep. Nominal Break Load = 1.0 tonnes
RL1004
Parafil Non-Conductive Guy Rope - 11mm
Parafil non-conductive guy rope is a parallel laid fibre synthetic rope designed for high strength, excellent tension-tension performance with low creep. Nominal Break Load = 2.0 tonnes
RL1005
Parafil Non-Conductive Guy Rope - 13.5mm
Parafil non-conductive guy rope is a parallel laid fibre synthetic rope designed for high strength, excellent tension-tension performance with low creep. Nominal Break Load = 3.5 tonnes
RL1112
Parafil Non-Conductive Guy Rope - 4mm
Parafil non-conductive guy rope is a parallel laid fibre synthetic rope designed for high strength, excellent tension-tension performance with low creep. Nominal Break Load = 0.3 tonnes
WS-BL
Warning sign, "non-ionising radiation..." - 300mm
Large warning sign with text "Non-ionising radiation fields beyond this point may exceed general public exposure limit"
WS-BS
Medium warning sign "Non-ionising radiation..." - 200mm
Warning sign with text "Non-ionising radiation fields beyond this point may exceed general public exposure limit"
WS-RL
Large warning sign "Beyond this point RF fields..." - 300mm
Warning sign with text "beyond this point RF fields exist that exceed the rules for human exposure"
WS-YC
Large caution sign, "Non-ionising radiation..." - 300mm
Caution sign with text "Non-ionising radiation consult site radiation folder before proceeding beyond this point"
WS-YC2
Large caution sign "Non-ionising radiation..." - 300mm
Caution sign with text "Non-ionising radiation consult site radiation folder before proceeding beyond this point"
WS-YD
Large warning sign, "Do not stand closer..." - 300mm
Warning sign with text "Do not stand closer than 1 metre from this antenna."
WS-YT
Large caution sign "Non-ionising radiation..." - 300mm
Caution sign with text "Non-ionising radiation consult site radiation folder"
WS-YU
Large caution sign "Non-ionising radiation authorised..." - 300mm
Caution sign with text "Non-ionising radiation authorised personnel only unauthorised personnel keep out"
SFC1.6
Compression straight strut, white fibreglass, no offest - 1.6m
The SFC range of fibreglass struts are design to be mounted beneath your antenna in a compression configuration. For above antenna mounting see the tension struts category.
SRFC1.6
Compression 90° strut, fibreglass, 90° end lug offset - 1.6m
The SRFC range of fibreglass struts are design to be mounted beneath your antenna in a compression configuration. For above antenna mounting see the tension struts category.
SRFC1.8
Compression 90° strut, fibreglass, 90° end lug offset - 1.8m
The SRFC range of fibreglass struts are design to be mounted beneath your antenna in a compression configuration. For above antenna mounting see the tension struts category.
SRFC2.0
Compression 90° strut, fibreglass, 90° end lug offset - 2.0m
The SRFC range of fibreglass struts are design to be mounted beneath your antenna in a compression configuration. For above antenna mounting see the tension struts category.
YS1-C23
Fibreglass compression Strut - 1.6m
Single fibreglass compression strut suitable for ZCG Y200 or Y300 series Yagis. Must be mounted beneath yagi
YS1-C48
Fibreglass Compression strut - 1.6m
Single fibreglass compression strut, suitable for ZCG Y415 to Y815 series square boom yagis. Must be mounted beneath the yagi.
YS2-23C
2-Way fibreglass compression strut - 1.98m
Dual compression fibreglass strut kit, suitable for ZCG Y200SS or Y300SS series of round boom yagis. Includes mounting accessory 2 x UV1-SS. Must be mounted beneath yagi.
YS2-C28
2-Way fibreglass compression strut kit - 1.6m
Dual fibreglass compression strut kit, suitable for ZCG Y200 or Y300 series of round boom yagis. Must be mounted from beneath yagi
YS2-C48
2-Way Fibreglass compression strut kit - 1.75m
Dual fibreglass compression strut kit, suitable for ZCG Y415 to Y815 square boom yagis. Must be mounted beneath yagi.
SF0.5
Single fibreglass tension strut - 500mm
Single fibreglass tension strut for vertical antenna support. Order mounting accessories to suit your requirements
SF1.0
Single fibreglass tension strut - 1.0m
Single fibreglass tension strut for vertical antenna support. Order mounting accessories to suit your requirements
SF1.5
Single fibreglass tension strut - 1.5m
Single fibreglass tension strut for vertical antenna support. Order mounting accessories to suit your requirements.
SF2.0
Single fibreglass tension strut - 2.0m
Single fibreglass tension strut for vertical antenna support. Order mounting accessories to suit your requirements
SF2.5
Single fibreglass tension strut - 2.5m
Single fibreglass tension strut for vertical antenna support. Order mounting accessories to suit your requirements.
SRF2.0
White fibreglass tension strut, 90 degree offset - 2.0m
2 mtr 90 degree off set strut, for mounting above the antenna.
SRF2.5
White fibreglass tension strut, 90 degree offset - 2.5m
2.5 mtr strut for mounting above antenna.
SRF-DM
2.0 Mtr Tension strut
These 90 deg offset tension struts are designed to be installed above the antenna.
YS1-INSUL
Single fibreglass insulated tension strut - customise length
Single fibreglass insulated tension strut for vertical antenna support. Specify length and mounting accessories to suit your requirements
YS1-100
single tension strut kit, fibreglass, suits Y100 series - includes mounting hardware
YS1-23
White fibreglass single tension strut kit (suits Y200/Y300 series) (incl. mounting)
YS1-48
White fibreglass single tension strut kit (Y4/ Y6/ Y8 series) (incl. mounting)
YS1-48-SP1
White fibreglass custom design single tension strut kit (2-stack Yagi array) (Y4/ Y6/ Y8 Series)
YS1-48-SP3
White fibreglass custom design single tension strut kit (4-stack Yagi array) (Y4/ Y6/ Y8 Series)
YS2-100
2-way white fibreglass tension strut kit (suits Y100 series Yagi) (incl. mounting)
YS2-23
2-Way white fibreglass tension strut kit (suits Y200/Y300 series Yagi) (incl. mounting)
YS2-23/SS
YS2-23-SS Tension strut KIt
The YS2-23-SS is a stainless steel strut kit for harsh environs. For yagis mounted horizontally. For vertical mounting please talk to our sales persons.
YS2-48
2-way white fibreglass tension strut kit (Y4/ Y6/ Y8 series Yagi) (incl. mounting)
YS2-48-SP1
2-Way white fibreglass custom design tension strut kit (2-stack Yagi array) (Y4/ Y6/ Y8 Series)
LA-1793-4
Coaxial power surge protector, 7/16" DIN male to 7/16" DIN female bulkhead, up to 2.6GHz
The LA-1793-4 flanged coaxial power surge protector is rated up to 2.6GHz with a 350 Volt DC sparkover internal gas tube. In the event of a power surge or lightning strike on your tower, mast or structure, inspect your surge protector and replace if the gas tube has activated. The LA-1793-4 is IP67 water proof rated.
CB-MF-90-3
Coaxial Power Surge Protector, Novaris - BNC Male to BNC Female
The CB-MF-90-3 coaxial power surge protector is rated up to 3GHz with a 90 Volt sparkover internal gas tube. In the event of a power surge or lightning strike on your tower, mast or structure, inspect your surge protector and replace if the gas tube has activated.
CF-FF-90-3
Novaris coaxial surge protector, F-type female to F-type female bulkhead, up to 3GHz
The CF-FF-90-3 coaxial power surge protector is rated up to 3GHz with a 90 Volt sparkover internal gas tube. In the event of a power surge or lightning strike on your tower, mast or structure, inspect your surge protector and replace if the gas tube has activated.
8293-2
DC Block, N-type female to N-type male, 10MHz-6GHz
THe 8293-2 DC Block is constructed of ternary alloy plated brass with an operating temperature -40° to 120°C. The 8293-2 is corrosion resistant as per MIL-STD-202.
CN-FF-600-3
Novaris coaxial surge protector, N-type female to N-type female bulkhead, up to 3GHz
The CB-MF-90-3 coaxial surge protector is rated up to 3GHz with a 600 Volt sparkover internal gas tube. In the event of a power surge or lightning strike on your tower, mast or structure, inspect your surge protector and replace if the gas tube has activated.
CN-FF-90-3
Novaris coaxial surge protector, gas tube type, N-type female to N-type female bulkhead, up to 3GHz
The CB-FF-90-3 coaxial power surge protector is rated up to 3GHz with a 90 Volt sparkover internal gas tube.In the event of a power surge or lightning strike on your tower, mast or structure, inspect your surge protector and replace if the gas tube has activated.
CN-FF-90-3-M
Novaris coaxial surge protector, gas tube type, N-type female to N-type female bulkhead, up to 3GHz
The CB-FF-90-3-M coaxial power surge protector is rated up to 3GHz with a 90 Volt sparkover internal gas tube. In the event of a power surge or lightning strike on your tower, mast or structure, inspect your surge protector and replace if the gas tube has activated. The CN-FF-90-3-M comes with a mounting bracket ...
CN-MF-90-3
Novaris coaxial surge protector, gas tube type, N-type male to N-type female bulkhead, up to 3GHz
The CB-MF-90-3 coaxial power surge protector is rated up to 3GHz with a 90 Volt sparkover internal gas tube. In the event of a power surge or lightning strike on your tower, mast or structure, inspect your surge protector and replace if the gas tube has activated.
CN-MF-90-3-M
Novaris coaxial surge protector, gas tube type, N-type male to N-type female, up to 3GHz
The CB-MF-90-3-M coaxial power surge protector is rated up to 3GHz with a 90 Volt sparkover internal gas tube. In the event of a power surge or lightning strike on your tower, mast or structure, inspect your surge protector and replace if the gas tube has activated. The CN-MF-90-3-M comes with a mounting bracket ...
FLA1792
Coaxial Power Surge Protector, RF MAX - N-Type Female Bulkhead to N-Type Female Bulkhead
The FLA1792 flanged coaxial power surge protector is rated up to 2.5GHz with a 230 Volt DC sparkover internal gas tube. In the event of a power surge or lightning strike on your tower, mast or structure, inspect your surge protector and replace if the gas tube has activated.
LA-1792
Coaxial power surge protector, N-type female to N-type female bulkhead, up to 2.5GHz
The LA-1792 flanged coaxial power surge protector is rated up to 2.5GHz with a 230 Volt DC sparkover internal gas tube. In the event of a power surge or lightning strike on your tower, mast or structure, inspect your surge protector and replace if the gas tube has activated. The LA-1792 is IP67 water proof rated.
LA-1792-3
Coaxial power surge protector, N-type female to N-type male, up to 3GHz
The LA-1792-3 flanged coaxial power surge protector is rated up to 3GHz with a 230 Volt DC sparkover internal gas tube. In the event of a power surge or lightning strike on your tower, mast or structure, inspect your surge protector and replace if the gas tube has activated. The LA-1792-3 is IP67 water proof rated.
LA-1793
Coaxial power surge protector, N-type male to N-type female bulkhead, up to 3GHz
N-type female to N-type male gas discharge tube type surge arrester, IP67 water rating.
LA-1793-2
Coaxial power surge protector, N-type male to N-type female bulkhead, up to 3GHz
N-female bulkhead to N-male, gas discharge tube type surge arrester.
LA-1793-3
Coaxial power surge protector, N-type female to N-type male, up to 3GHz
The LA-1793-3 coaxial power surge protector is rated up to 3GHz with a 230 Volt DC sparkover internal gas tube. In the event of a power surge or lightning strike on your tower, mast or structure, inspect your surge protector and replace if the gas tube has activated. The LA-1793-3 is IP67 water proof rated.
8125
Stainless steel cable tie tensioner & cutting tool
The stainless steel cable tie tool is designed to fit stainless steel cable ties quickly and easily leaving no sharp ends.
HT336D2
8.7" hex crimp tool, suitable for crimp connectors/cable RG58/RG59/RG62/RG11/RG8/RG213/RU400 & RF400
Having used various brands of hand crimp tools both in our manufacturing as well as field services departments over the years, ZCG can highly recommend these 8.7" Hex Series tools for fitting crimp connectors.
HT336G
8.7" hex crimp tool, suitable for crimp connectors/cables RG58/ RG59/ RG62/RG174/ RG142/ RG316 and fibre optic
Having used various brands of hand crimp tools both in our manufacturing as well as field services departments over the years, ZCG can highly recommend these 8.7" Hex Series tools for fitting crimp connectors
TT1250
Coaxial cable trimming/stripping tool (1/2" flexible cable) (ZCG1250) (incl. spare blades)
To prepare 1/2", 1/2" super flexible or 7/8" coaxial cable with neat clean terminations for connectors, these coaxial cable trimming tools make the task quick, easy, neat and precise. TT1250 is for - Cable Type 1/2" Coaxial Cable.
TT1250SF
Coaxial Cable trimming/stripping tool (1/2" super flexible cable) (ZCG1250SF) (incl. spare blades)
To prepare 1/2", 1/2" super flexible or 7/8" coaxial cable with neat clean terminations for connectors, these coaxial cable trimming tools make the task quick, easy, neat and precise. TT1250SF is for: 1/2" Super Flexible Coaxial Cable
TT7850
Coaxial cable trimming/stripping tool (7/8" flexible cable) (ZCG7850) (incl. spare blades)
To prepare 1/2", 1/2" super flexible or 7/8" coaxial cable with neat clean terminations for connectors, these coaxial cable trimming tools make the task quick, easy, neat and precise. TT7850 is for: 7/8" Coaxial Cable
S2B44-1C
2-stack UHF dipole array, aluminium, 400-520MHz, 4.5dBd - 1.5m
The S2B44-1C UHF dipole stack array is also available in a 4-stack configuration depending on your gain requirements. The S2B44-1C is recommended to be mounted as high on your structure or tower, or as an alternative to use the tower as a rear screen for a more directional pattern
ZM204-CB
27MHz Land CB 5-Piece Collinear - 26.9-27.4MHz
The ZM204-CB offers a economical and lightweight solution omnidirectional 27MHz communications. The 5-piece telescopic design allows for a minimal packaging and storage size.
ZN2-375-03
Omni-directional UHF CB radio collinear, 477MHz, 4.5dBi - 1.55m
The ZN2-375-03 is specifically designed and manufactured for UHF CB Radio communications at the 477MHz frequency. This antenna is recommended for fixed position structure or tower mounting using the appropriate mounting hardware.
ZN2-675-06
Omni-directional UHF CB radio collinear, 477MHz, 6dBi - 1.85m
The ZN2-675-06 is specifically designed and manufactured for UHF CB radio communications at the 477MHz frequency. This antennas is recommended for fixed position mounting on a structure or tower using the appropriate mounting hardware.
ZN2-77-06-AC
Omni-directional UHF CB radio collinear, 477MHz, 8.1dBi - 2.5m
The ZN2-77-06 omnidirectional collinear is specifically designed and manufactured for use as a UHF CB radio mast mount antenna.
ZN2-77-09-AC
Omni-directional UHF CB radio collinear, 477MHz, 12dBi - 3.3m
The ZN2-77-09 omnidirectional collinear is specifically designed and manufactured for use as a UHF CB radio mast mount antenna.
AB-BFB-118
Air Band Mobile antenna, 3% Tuneable bandwidth
The AB-BFB-118 is specifically designed and manufactured for Air Band with the purpose to be field tuned to required frequency.
B14
Omni-directional air band scaled coaxial dipole, white, 118-136MHz, specify 3MHz, 0dBd - 3m
The B14 is an omnidirectional coaxial dipoles are effective is an economical Air Band fixed position antenna, suitable for ground to aircraft communications
B14-AS
Broadband Airband collinear, 118-136MHz, 0dBd - 1.8m
White broadband collinear for airband communications between the ground and aircraft covering full airband frequency 118-136MHz.
B18
Air band scaled coaxial dipole, 118-136MHz, 0dBd - 2.1m
The B18 omni-directional coaxial dipoles is an effective and economical Air band fixed position antenna, suitable for communications between aircraft and air traffic control.
S2B42-1C
Air Band 2-Stack Dipole Array - 118-136MHz
These 2 stack dipole arrays cover the full Air Band frequency range 118-136MHz.
S2B42-1CSS
Air Band 2-Stack Dipole Array, Stainless Steel - 118-136MHz
These 2-stack dipole arrays cover the full Air Band frequency range 118-136MHz.
S4B42-1C
Air Band 4-Stack Dipole Array, Aluminium - 118-136MHz
These 4 stack dipole arrays cover the full Air Band frequency range 118 to 136MHz.
S4B42-1CSS
Air Band 4-Stack Dipole Array, Stainless Steel - 118-136MHz
The S4B42-1CSS 4-stack dipole array cover the full Air Band frequency range 118-136MHz.
B55AL
Air Band scaled monocone, aluminium, 118-136MHz, specify 8MHz 0dBd - 1.5m
The B55AL monocone is an economical and effective antenna for airport communications. Using the lower section of the Air Band for transmit, the sliding radials can be easily fitted tuned to receive within the Air Band frequency range 118-136MHz.
B55SS
Air Band Monocone, stainless steel - 118-136MHz
Suitable for mounting to lightweight towers, the B55SS monocone covers the entire Air Band frequency 118-136MHz, making this the ideal fixed position antenna for Airports where a variety of channels are used.
M55SS-MIL
Air Band Naval SPEC Monocone - 118-136MHz
Designed and manufactured for naval military conditions the M55SS-MIL is suited for mounting to either a naval vessel or structure where adverse weather is experienced.
PDDA2
Air Band 2-Way Sidemount Dipole Phasing Harness - 118-136MHz
The PDDA2 Air Band sidemount dipole phasing harness is designed for combining the feeders of 2 sidemount dipole into a single 50 Ohm input. The antennas may be in a stack array configuration or in non-array formation. The PDDA2 comes standard with a N-type Female input and 2 x N-Type Male outputs with a 500 Watt power ...
PDDA4
Air Band 4-Way Sidemount Dipole Phasing Harness - 118-136MHz
The PDDA4 Air Band sidemount dipole phasing harness is designed for combining the feeders of 4 sidemount dipole into a single 50 Ohm input. The antennas may be in a stack array configuration or in non-array formation. The PDDA4 comes standard with a N-type Female input and 4 x N-Type Male outputs with a 500 Watt power ...
PDYA2
Air Band 2-Way Yagi Phasing Harness - 118-136MHz
The PDYA2 Air Band Yagi phasing harness is designed for combining the feeders of 2 Yagi's into a single 50 Ohm input. The antennas may be in a stack array configuration or in non-array formation. The PDYA2 comes standard with a N-type Female input and 2 x N-Type Male outputs with a 500 Watt power handling capability.
PDYA4
Air Band 4-Way Yagi Phasing Harness - 118-136MHz
The PDYA4 Air Band Yagi phasing harness is designed for combining the feeders of 4 Yagi's into a single 50 Ohm input. The antennas may be in a stack array configuration or in non-array formation. The PDYA4 comes standard with a N-type Female input and 4 x N-Type Male outputs with a 500 Watt power handling capability.
B113SS
VOR/ILS sidemount dipole, stainless steel, 108-118MHz, 0dBd - 1.1m
The B113 stainless steel sidemount dipole is designed covers the entire VOR/ILS frequency band 108-118MHz suitable for use at airports or on naval vessels. Stacking sidemount dipoles will greatly improve the gain and directionality of the signal.
B42
Air band sidemount dipole, aluminium, 118-136MHz, 0 dBd - 1.0m
The B42 aluminium sidemount dipole is designed for use in Air band ground to aircraft communications within the 118-136MHz frequency range. Stacking sidemount dipoles will greatly improve the gain and directionality of the signal.
B42SS
Air band sidemount dipole, stainless steel, 118-136MHz, 0dBd - 1.0m
The B42SS stainless steel sidemount dipole is designed for use in Air band ground to aircraft communications within the 118-136MHz frequency range. Stacking sidemount dipoles will greatly improve the gain and directionality of the signal..
FMRX
FM Radio Receive Collinear, grey - 2.06m
The FMRX is an economical and effective base station antenna solution to those seeking to improve their FM radio reception at home or in the office, particularly in situations where signal strength indoors is poor. Mount using the supplied mounting hardware. Connect 5.5 metres RG59 directly into the antenna port on ...
LPY108-88
FM Radio Receive Log Periodic Yagi - 1.32m
For applications requiring improved receive coverage of the entire FM Radio frequency range 87.5 to 108.5MHz over a long distance or difficult terrain, the LPY108-88 log periodic yagi offers the ideal solution. Mount using the attached mounting hardware and connect via the N-Type Female supplied.
Flexible-Dipole
Super Flexible FM radio receive sidemount dipole, 70-108MHz, specify 3MHz, 0dBd - 1.5m
The flexible dipole is a super flexible coaxial sidemount dipole specifically designed and manufactured for very low power transmit and receive between 70-108.5MHz. Suitable for indoor or outdoor use, like inside a stadium for interior radio broadcast.
B46B
FM Radio sidemount dipole, aluminium, 87.5-108MHz, 0dBd - 1.4m
The B46B sidemount dipole is the ideal choice for use as an FM radio broadcast antenna or standby broadcast antenna. They are of reliable construction, cover a broad bandwidth and permit single antenna sharing with multiple FM transmit frequencies. ZCG recommend mounting the B46B as high on your structure or tower as ...
HFS30
Stainless steel HF broadband 3-wire - 3.6-30MHz, 2mm wire, UHF female termination, 100W, 5dBi - 29m
HFS30 is a 3 wire broadband antenna which covers the entire HF frequency range 3.6 to 30MHz. the light but sturdy desgin is highly efficient and offers excellent performance with minimal wind loading.
CM1600-4GX
Omni-directional 4G LTE/ 4GX collinear, 700-788MHz, 8.1dBi - 2.2m
The CM1600-4GX 4G LTE/ 4GX mast mount, offers the maximum gain and reception range practical in a omni-directional, mobile phone/wireless data fixed position collinear. To mount the CM1600-4GX to your mast/pole or structure ZCG recommends the use of 2 x EB1-SS parallel clamps, 1 x UB3-SS parallel clamp or 2 x NSM-B20M ...
CM1600AM
Omni-directional Telstra 3G/ Next G collinear, white, 825-890MHz, 8.1dBi - 2.4m
The CM1600AM Telstra 3G/ Next G mast mount, offers the maximum gain and reception range practical in a omni-directional, mobile phone/wireless data fixed position collinear. To mount the CM1600AM to your mast/pole or structure ZCG recommends the use of 2 x EB1-SS parallel clamps, 1 x UB3-SS parallel clamp or 2 x ...
CMG1600AM
Omni-directional Optus & Vodafone 3G collinear, 890-960MHz, 8.1dBi - 2.4m
The CMG1600AM, Optus & Vodafone 3G mast mount collinear, offers the maximum gain and reception range practical in a omni-directional, mobile phone/wireless data fixed position collinear.
SGDB-MM-N
Omnidirectional Telstra, Optus & Vodafone 4G, 3G & GSM Mobile Phone Collinear - 1.4m
The SGDB-MM-N is a mast mount collinear designed and manufactured to improve your cellular and data recieve and transmit.
SGDB-T10
Omni-directional Telstra, Optus & Vodafone 4G & 3G collinear, 6.2 & 3dBi - 1.1m
The SGDB-T10 omni-directional mobile phone or wireless data collinear covers all of the Telstra, Optus and Vodafone 4G and 3G (Next G) networks. This antenna suits applications of mobile phone or wireless data improvement or as a external link antenna. ZCG recommend mounting the SGDB-T10 as high on your building, pole ...
LPY2250
UHF broadband log periodic Yagi, stainless steel, 850-2250MHz, 8dBi - 480mm
The LPY2250 broadband log periodic Yagi provide exceptionally broad bandwidth coverage across the UHF or Mobile phone frequency range 850-2250MHz. ZCG recommend mounting the LPY as high on your structure or tower as possible using the attached mounting hardware.
LPY2250-25
UHF or mobile phone log periodic Yagi, stainless steel, 650-2250MHz, 10.2dBi - 1.15m
The LPY2250-25 log periodic Yagi provides exceptionally broad bandwidth coverage across the full UHF or Mobile phone frequency range 650-2250MHz. Suitable for either UHF applications or wideband mobile phone network applications. ZCG recommend mounting the LPY as high on your structure or tower as possible using the ...
LPY2250-716
UHF or mobile phone log periodic Yagi, stainless steel, 790-2800MHz, 10.8dBi - 900mm
The LPY2250-716 log periodic yagi provides exceptionally broad bandwidth coverage across the UHF or mobile phone frequency range 790-2800MHz. ZCg recommend mounting the LPY as high on your structure or tower as possible using the attached mounting hardware.
PDD82
UHF or Mobile Phone 2-Way Sidemount Dipole Phasing Harness - 800-960MHz
The PDD82 UHF or Mobile Phone sidemount dipole phasing harness is designed for combining the feeders of 2 sidemount dipole into a single 50 Ohm input. The antennas may be in a stack array configuration or in non-array formation. The PDD82 comes standard with a N-type Female input and 2 x N-Type Male outputs with a 50 ...
PDD84
UHF or Mobile Phone Sidemount Dipole Phasing Harness - 800-960MHz
The PDD84 UHF or Mobile Phone sidemount dipole phasing harness is designed for combining the feeders of 4 sidemount dipole into a single 50 Ohm input. The antennas may be in a stack array configuration or in non-array formation. The PDD84 comes standard with a N-type Female input and 4 x N-Type Male outputs with a 50 ...
PDY82
UHF or Mobile Phone 2-Way Yagi Phasing Harness - 800-960MHz
The PDY82 UHF or Mobile Phone Yagi phasing harness is designed for combining the feeders of 2 Yagi's into a single 50 Ohm input. The antennas may be in a stack array configuration or in non-array formation. The PDY82 comes standard with a N-type Female input and 2 x N-Type Male outputs with a 50 Watt power handling ...
PDY84
UHF or Mobile Phone 4-Way Yagi Phasing Harness - 800-960MHz
The PDY84 UHF or Mobile Phone Yagi phasing harness is designed for combining the feeders of 4 Yagi's into a single 50 Ohm input. The antennas may be in a stack array configuration or in non-array formation. The PDY84 comes standard with a N-type Female input and 4 x N-Type Male outputs with a 50 Watt power handling ...
B88SS
UHF or Mobile phone sidemount dipole, stainless steel, 800-960MHz, 0dBd - 150mm
The B88SS stainless steel sidemount dipole offers genuine broadband coverage across the UHF or Mobile phone 800-960MHz frequency band. The small profileof the B88SS results in a minimal mounting area on your structure/tower or mast.
Y706A-R
4GX/ 4G LTE 6 element round boom Yagi, 700-750MHz, 9dBd - 865mm
The Y706A-R Telstra 4GX and Optus 4G LTE round boom Yagi is manufactured to improve both mobile phone coverage and wireless data in the new 4GX or 4G LTE 700-750MHz frequency range. Suitable for mounting at home or the office. Other models covering 4G, 3G (NextG) and GSM are also available.
Y715-RW
4GX/ 4G LTE & 4G 15 element round boom Yagi, 698-890MHz, 13dBd - 1.55m
The Y715-RW 15 element round boom Yagi has been designed to cover the new Telstra 4GX and Optus 4G LTE as well as 3G/4G lower, working within the frequency range 698-890MHz. The Y715-RW is suitable for mobile phone or data improvement over a long distance or where the terrain requires a directional signal.
Y806A
Telstra 3G 6 element Yagi, aluminium, 825-890MHz, 9dBd - 800mm
The Y806A mobile phone Yagi is specifically design and manufactured for the Telstra 3G (Next G) mobile phone and wireless data network 825-890MHz. Ideal for mounting at the home or office to improve your mobile phone coverage. Alternate models with higher gain and stainless steel or round boom are also available.
Y806A-R
Telstra 3G 6 element round boom Yagi, aluminium, 825-890MHz, 9dBd - 800mm
The Y806A-R is an ideal economical antenna solution for directional Telstra 3G (NextG) 825-890MHz mobile phone improvement or as a wireless data link connections. Higher gain aluminium or stainless steel version are also available.
Y806A-SS
Telstra 3G 6 element Yagi, stainless steel, 825-890MHz, 9dBd - 800mm
The Y806A-SS mobile phone Yagi is specifically design and manufactured for the Telstra 3G (Next G) mobile phone and wireless data network 825-890MHz. Ideal for mounting at the home or office to improve your mobile phone coverage. Alternate models with higher gain in aluminium or round boom are also available.
Y806C
Optus & Vodafone 3G 6 element Yagi, 890-960MHz, 9dBd 750mm
The Y806C mobile phone Yagi is specifically design and manufactured for the Optus & Vodafone 3G mobile phone and wireless data network 890-960MHz. Ideal for mounting at the home or office to improve your mobile phone coverage. Alternate models with higer gain and stainless steel or round boom are also available.
Y806C-R
Optus & Vodafone 3G 6 element round boom Yagi, 890-960MHz, 9dBd - 750mm
The Y806C-R is ideal economical antenna solution for directional Optus & Vodafone 3G 890-960MHz mobile phone improvement or as a wireless data link connections. Higher gain aluminium or stainless steel version are also available.
Y806C-SS
Optus & Vodafone 3G 6 element Yagi, stainless steel, 890-960MHz, 9dBd - 750mm
The Y806C-SS mobile phone Yagi is specifically design and manufactured for the Optus & Vodafone 3G mobile phone and wireless data network 890-960MHz. Ideal for mounting at the home or office to improve your mobile phone coverage. Alternate models with higher gain and aluminium or round boom are also available.
Y809A
Telstra 3G 9 element Yagi, aluminium, 825-890MHz, 11.5dBd - 970mm
The Y809A mobile phone Yagi is specifically design and manufactured for the Telstra 3G (Next G) mobile phone and wireless data network 825-890MHz. Ideal for mounting at the home or office to improve your mobile phone coverage. Alternate models with higher or lower gain and stainless steel or round boom are also ...
Y809A-R
Telstra 3G 9 element round boom Yagi, aluminium, 825-890MHz, 11.5dBd - 970mm
For directional Telstra 3G mobile phone improvement or a wireless data link the Y809A-R is the perfect solution.
Y809A-SS
Telstra 3G 9 element Yagi, stainless steel, 825-890MHz, 11.5dBd - 970mm
For directional Telstra 3G mobile phone improvement or as a wireless data link the Y809A-SS 11.5dBd Yagi is the ideal solution
Y809C
Optus & Vodafone 3G 9 element Yagi, aluminium, 890-960MHz, 11.5dBd - 970mm
The Y809C mobile phone Yagi is specifically design and manufactured for the Optus & Vodafone 3G mobile phone and wireless data network 890-960MHz. Ideal for mounting at the home or office to improve your mobile phone coverage. Alternate models with higer gain and stainless steel or round boom are also available.
Y809C-R
Optus & Vodafone 3G 9 element round boom Yagi, aluminium, 890-960MHz, 9dBd - 970mm
The Y809C-R is ideal economical antenna solution for directional Optus & Vodafone 3G 890-960MHz mobile phone improvement or as a wireless data link connections. Higher gain aluminium or stainless steel version are also available.
Y809C-SS
Optus & Vodafone 3G 9 element Yagi, stainless steel, 890-960MHz, 9dBd - 970mm
The Y809C-SS mobile phone Yagi is specifically design and manufactured for the Optus & Vodafone 3G mobile phone and wireless data network 890-960MHz. Ideal for mounting at the home or office to improve your mobile phone coverage. Alternate models with higher gain and aluminium or round boom are also available.
Y815A
Telstra 3G 15 element Yagi, aluminium, 825-890MHz, 14dBd - 1.85m
The Y815A mobile phone Yagi is specifically design and manufactured for the Telstra 3G (Next G) mobile phone and wireless data network 825-890MHz. Ideal for mounting at the home or office to improve your mobile phone coverage. Alternate models with higher gain and stainless steel or round boom are also available.
Y815A-R
Telstra 3G 15 element round boom Yagi, aluminium, 825-890MHz, 14dBd - 1.85m
The Y815A-R is ideal economical antenna solution for directional Telstra 3G (NextG) 825-890MHz mobile phone improvement or as a wireless data link connections. Lower gain aluminium or stainless steel version are also available.
Y815A-R-SB
Telstra 3G 15 element round split boom Yagi, aluminium, 825-890MHz, 14dBd - 1.85m
The Y156A-R-SB is an ideal economical antenna solution for directional Telstra 3G (Next G) 825-890MHz mobile phone improvement or as a wireless data link connections. The split boom deisgn allows for reduced courier costs and reduces storage. Higher gain aluminium or stainless steel version are also available.
Y815A-SS
Telstra 3G 15 element Yagi, stainless steel, 825-890MHz, 14dBd - 1.85m
The Y815A-SS mobile phone Yagi is specifically design and manufactured for the Telstra 3G (Next G) mobile phone and wireless data network 825-890MHz. Ideal for mounting at the home or office to improve your mobile phone coverage. Alternate models with lower gain in aluminium or round boom are also available.
Y815B2-DM
UHF 2-stack 15 element Yagi array, aluminium, 852-930MHz, 17dBd - 1.7m
The Y815B2-DM dual Yagi arry is a fully welded 2-stack configuration suitable for UHF STL links, Mobile phone improvement over a long distance or for long distance wireless data transfer. A horizontal polarised model is also available.
Y815C
Optus & Vodafone 3G 15 Element Yagi, aluminium, 890-960MHz, 14dBd - 1.85m
The Y815C mobile phone Yagi is specifically design and manufactured for the Optus & Vodafone 3G mobile phone and wireless data network 890-960MHz. Ideal for mounting at the home or office to improve your mobile phone coverage. Alternate models with higer gain and stainless steel or round boom are also available.
Y815C-R
Optus & Vodafone 3G 15 element round boom Yagi, 890-960MHz, 14dBd - 1.85m
The Y815C-R is ideal economical antenna solution for directional Optus & Vodafone 3G 890-960MHz mobile phone improvement or as a wireless data link connections. Higher gain aluminium or stainless steel version are also available.
Y815C-SS
Optus & Vodafone 3G 15 element Yagi, stainless steel, 890-960MHz, 14dBd - 1.85m
The Y815C-SS mobile phone Yagi is specifically design and manufactured for the Optus & Vodafone 3G mobile phone and wireless data network 890-960MHz. Ideal for mounting at the home or office to improve your mobile phone coverage. Alternate models with lower gain and aluminium or round boom are also available.
MGP-1500N
UHF STL Link Grid-Pack, 1400-1500MHz - 1.8m
The MGP-1500N is an ideal solution for long distance, directional STL links between transmission site and studio utilising the UHF 1400-1500MHz range. The MGP-1500N is a two-piece design for easier storage and delivery and will require assembly of the 2-pieces and central launcher.
MGP-1721N
UHF STL Grid-pack, 1710-2100MHz - 1.8m
The MGP-1721N is an ideal solution for long distance or difficult terrain STL links between transmission site and studio utilising the UHF 1710-2100MHz range. The MGP-1721N is a two-piece design for easier storage and delivery and will require assembly of the 2-pieces and central launcher.
MGP-6400N
UHF STL link grid-pack, 400-500MHz - 1.8m
The MGP-6400N is an ideal solution for long distance or difficult terrain STL links between transmission site and studio utilising the UHF 400-500MHz range. The MGP-6400N is a two-piece design for easier storage and delivery and will require assembly of the 2-pieces and central launcher.
MGP-8400N
UHF STL link grid-pack, 400-500MHz, 2.4m
N-female fitted in base of horn and a maximum power rating of 200 Watts. Gain performance of 18.1dBi mid band. This 2.4 m UHF Grid Pack requires assembly of the 2-piece design.
B1050
ADS-B UHF coaxial dipole, 1090MHz, 0dBd - 1.0m
The B1050 coaxial dipole provides an economical base station ADS-B antenna solution with no compromise in either quality of construction or performance. It is ideal for omnidirectional low power transmit and recieve applications up to 100 Watts.
B16
UHF scaled coaxial dipole, 400-520MHz, specify 3%, 0dBd - 1.5m
The B16 coaxial dipole provides an economical base station antenna solution with no compromise in either quality of construction or performance. It is ideal for omni-directional low power transmit and recieve applications up to 100 Watts.
B16-AA
UHF coaxial dipole, 310-335MHz, 0dBd - 1.5m
The B16-AA coaxial dipole provides an economical base station antenna solution with no compromise in either quality of construction or performance. It is ideal for omni-directional low power transmit and recieve applications up to 100 Watts.
B16-AB
UHF coaxial dipole, 336-362MHz, 0 dBd - 1.5m
The B16-AB coaxial dipole provides an economical base station antenna solution with no compromise in either quality of construction or performance. It is ideal for omni-directional low power transmit and recieve applications up to 100 Watts.
B16-AC
UHF coaxial dipole, 363-390MHz, 0dBd - 1.5m
The B16-AC coaxial dipole provides an economical base station antenna solution with no compromise in either quality of construction or performance. It is ideal for omni-directional low power transmit and recieve applications up to 100 Watts.
CFD620-MGB
Wireless microphone magnetic base collinear, black, 620MHz, 2.1dBi - 750mm
The CFD620-MGB wireless microphone collinear is mounted onto a black powdercoated magnetic base. Suitable for mounting onto any magnetic surface, or any magnetic metallic flat surface. fitted with 5 metres of RG58 Low Loss cable and a SMA male fitted as standard, the terminations can be changed to suit your ...
CLU3SS
Omni-directional UHF Collinear, 400-520MHz - 1.7m
The CLU3SS mast mount UHF collinear is designed and manufactured to ensure long term survival and will deliver reliable performance for many years within the UHF 400-520MHz frequency range. Please specify 1.5% bandwidth when ordering.
G35
Omni-direction UHF collinear, 300-400MHz, 6dBd - 2.9m
The G35 omni-directional fixed position collinear is designed for commercial paging, trunking and general communication systems operating within the UHF 300-400MHz frequency range. Please specify 5% bandwidth when ordering. Recommended 2 x UAM180L mounting hardware is not supplied with the antenna.
G35-R
Omni-directional UHF scaled collinear, 300-400MHz, specify 5%, 7/16" DINF, 6dBd - 2.9m
The G35-R omni-directional ruggedised collinear is designed for commercial paging, trunking and general communication systems operating within the UHF frequency range. The G35-R is the ruggedised version of the standard G35, suitable for more extreme conditions of high wind loading or extreme weather.
G45
Omni-directional UHF scaled collinear, 380-520, specify 4%, 3dBd - 2.5m
This range of UHF omnidirectional base station collinears are designed for use within the UHF frequency range 380 to 520MHz with a specified 4% bandwidth.
G46
Omni-directional UHF scaled collinear, 380-520MHz, specify 1.5%, 6dBd - 3.0m
The G46 omni-directional UHF scaled collinear is specifically designed and manufactured for UHF Communications within the 380-520MHz UHF range. Terminated with an N-type female in the base of the mount section to ensure an easy installation and connection.
G49
Omni-directional UHF scaled collinear, 430-520MHz, specify 1.5%, 9dBd - 3.5m
This range of UHF omnidirectional base station collinears are designed for use within the UHF frequency range 430 to 520MHz. A ruggedised G49-R model is also available for extreme environment requirements.
G49R
Omni-directional UHF ruggedised scaled collinear, 380-520MHz, specify 1.5%, 9dBd - 4.0m
This range of UHF omnidirectional base station collinears are designed for use within the UHF frequency range 380 to 520MHz. The G49R is the ruggedised version of the standard G49 collinear. with an uprated radome and mount section, this antenna is suitable for extreme environmental conditions.
G56
Omni-directional UHF scaled collinear, 520-960MNHz, specify 1.5%, 6dBd - 3.0m
These high gain UHF omni-directional collinears are suitable for two-way radio systems operating within the 520 to 960MHz frequency range.
G59
Omni-directional UHF scaled collinear, 520-960MHz, specify 1%, 9dBd - 4.0m
These high gain UHF omnidirectional base station collinears are suitable for two-way radio systems operating within the 520 to 960MHz frequency range.
SG600-MGB
Magnetic Base mounted antenna
The SG600-MGB magnetic base collinear is suitable for roof mounting or mounting onto any magnetic flat horizontal surface. The SG600-MGB works within the 600-650MHz range suitable for applications such as wireless microphone transmit and receive.
SG600-MMA
Omni-directional UHF collinear with MMA, 600-650MHz, 5.1dBi - 800mm
The SG600-MMA UHF fixed position collinear offers ideal performance combined with ZCG's robust tried and tested quality construction. The mast mount adaptor or MMA can be removed if not required by unscrewing from the mount ferrule, the antenna can then be fitted to a spring base or bracket.
SG675-MMA
White UHF super gain omni-directional collinear - 650-700MHz, BNC male termination, 35W, 5.1 dBi - 800mm
The SG series of UHF base station collinears offer fine performance combined with our robust tried and tested ZCG quality construction. complete with Mast mount adaptor.
ZN1-400-N
UHF lightweight flexible whip antenna, 360-470MHz - 735mm
The ZN1-400-N flexible half-wave whip antenna with a dia. 20 x 350 aluminium mount tube. 360-470MHz for any 20 MHz bandwidth, suitable for fixed position UHF communications.
RA4
UHF scaled corner reflector, 400-520MHz, specify 20MHz, 10dBd - 600mm
When you require good gain together with a high front-to-back ratio, a RA4 all aluminium corner reflector will provide the ideal base station antenna solution. The scaled sidemount dipole and rear screen are specifically deisgned and manufactured to your specified frequency.
RA8
UHF or Mobile phone corner reflector, 800-960MHz, 10dBd - 300mm
When you require execllent gain together with a high front-to-back ratio, a corner reflector will provide the ideal base station antenna solution.
DUA-4052AL
Omni-directional UHF dipole binary array, aluminium, 400-520MHz, 3dBd - 2.5m
The binary dipole array offers both an omnidirectional radiation pattern and genuine broadband coverage across the entire UHF frequency range. The DUA-4052AL is best mounted protruding from the highest point of your structure or tower to allow for a fully omni-directional pattern.
DUA-4052AL-2
Omni-directional UHF dipole binary array, aluminium, 400-520MHz, 2dBd - 2.0m
The binary dipole array offers both an omnidirectional radiation pattern and genuine broadband coverage across the entire UHF frequency range.The DUA-4052AL-2 is best mounted protruding from the highest point of your structure or tower to allow for a fully omni-directional pattern.
DUA-4052AL-6
Omni-directional UHF dipole binary array, aluminium, 400-520MHz, 6dBd - 3.5m
The binary dipole array offers both an omnidirectional radiation pattern and genuine broadband coverage across the entire UHF frequency range. The DUA-4052AL-6 is best mounted protruding from the highest point of your structure or tower to allow for a fully omni-directional pattern.
DUA-4052AL-6E
Elliptical directional UHF dipole binary array, aluminium, 400-520MHz, 6dBd - 3.5m
The elliptical binary dipole array offers both an elliptical radiation pattern and genuine broadband coverage across the entire UHF frequency range. THe DUA-4052AL-6E is recommended to be mounting protruding from the top of your structure or tower to ensure a true elliptical pattern.
DUA-4052AL-9
Omni-directional UHF dipole binary array, aluminium, 400-520MHz, 9dBd - 7.2m
The binary dipole array offers both an omnidirectional radiation pattern and genuine broadband coverage across the entire UHF frequency range. The DUA-4052AL-9 is recommended mounting protruding from the highest point on your structure or tower to ensure a true omni-directional pattern. The split boom design allows ...
DUA-4052SS
Omni-directional UHF dipole binary array, stainless steel, 400-520MHz, 3dBd - 2.5m
The binary dipole array offers both an omnidirectional radiation pattern and genuine broadband coverage across the entire UHF frequency range. The DUA-4052SS is recommended to be mounted at the highest point to ensure a true omni-directional pattern.
DUA-4052SS-6
Omni-directional UHF dipole binary array, stainless steel, 400-520MHz, 6dBd - 3.2m
The binary dipole array offers both an omnidirectional radiation pattern and genuine broadband coverage across the entire UHF frequency range. The DUA-4052SS-6 is recommended for mounting at the highest point of your structure or tower to ensure a true omni-directional pattern.
DUA-4052SS-6E
Elliptical directional UHF dipole binary array, stainless steel, 400-520MHz, 6dBd - 3.2m
The binary dipole array offers both an Elliptical radiation pattern and genuine broadband coverage across the entire UHF frequency range. The DUA-4052SS-6E is recommended for mounting at the highest point of your structure or tower to ensure a true elliptical pattern.
DUA-4052SS-9
Omni-directional UHF dipole binary array, stainless steel, 400-520MHz, 9dBd - 7.2m
The binary dipole array offers both an omnidirectional radiation pattern and genuine broadband coverage across the entire UHF frequency range. The DUA-4052SS-9 is recommended for mounting at the highest point of your structure or tower to ensure a true omni-directional pattern.
S2B44-1CSS
2-stack UHF dipole array, stainless steel, 400-520MHz, 4.5dBd - 1.5m
The S2B44-1CSS UHF dipole stack array is also available in a 4-stack configuration depending on your gain requirements. The S2B44-1CSS is recommended to be mounted as high on your structure or tower, or as an alternative to use the tower as a rear screen for a more directional pattern
S4B44-1C
4-stack UHF dipole array, aluminium, 400-520MHz, 7dBd, 2.5m
The S4B44-1C UHF dipole stack array is also available in a 2-stack configuration depending on your gain requirements. The S4B44-1C is recommended to be mounted as high on your structure or tower, or as an alternative to use the tower as a rear screen for a more directional pattern
S4B44-1CSS
4-stack UHF dipole array, stainless steel, 400-520MHz, 7dBd - 2.5m
The S4B44-1CSS UHF dipole stack array is also available in a 2-stack configuration depending on your gain requirements. The S4B44-1CSS is recommended to be mounted as high on your structure or tower, or as an alternative to use the tower as a rear screen for a more directional pattern.
S4B44-X
UHF 4-stack dipole array, aluminium, 400-520MHz, 4 x N-type females, 0dBd - 3.4m
The S4B44-X is a unique UHF dipole stack array with 4 outputs which allows the use of multiple transmit or recieve functions within the UHF 400-520MHz frequency range. The S4B44-X comes standard with 4 x N-type females fitted, but can be altered to suit your requirements. ZCG recommend mounting the S4B44-X as high on ...
B50RX
VHF & UHF broadband receive discone, aluminium, 65-520MHz - 1.5m
The B50RX discone base station antenna provides an omnidirectional radiation pattern, low VSWR and genuine broadband coverage for receive across the VHF & UHF frequency range 65-520MHz.
B51H
VHF & UHF broadband discone, aluminium, 70-1000MHz, 0dBd - 1.2m
The B51H broadband discone provides a true omni-directional radiation pattern and genuine broadband coverage for both transmit and recieve across the full VHF & UHF frequency range 70-1000MHz. Mount the B51H using 2 x EB1-SS or 1 x UB3-SS
B51H-SS
VHF and UHF broadband discone, stainless steel, 70-1000MHz, 0dBd - 1.2m
The B51H-SS broadband discone provides a true omni-directional radiation pattern, low VSWR and genuine broadband coverage for both transmit and recieve across the full frequency band 70-1000MHz. Mount the B51H-SS using 2 x EB1-SS or 1 x UB3-SS.
B55H-SS
VHF and UHF broadband discone, stainless steel, 50-500MHz, 0dBd - 1.4m
The B55H-SS boradband discone provides a true omni-directional radiation pattern, low VSWR and genuine broadband coverage for both low power transmit and recieve across the full frequency band 50- 500MHz.
LPY100-800SS
VHF and UHF log periodic Yagi, stainless steel, 100-800MHz, 7dBi - 2.5m
The LPY100-800SS fully-welded 304 stainless steel log periodic VHF & UHF Yagi is designed for full band VHF or UHF Communications within the 100-800MHz frequency range. The LPY100-800SS has the ability to be dis-assembled for reduce courier cost and storage when not in use.
LPY350
UHF log periodic Yagi, stainless steel, 300-400MHz, 6.8dBi - 600mm
The LPY350 is designed for the 300 to 400 MHz band.
LPY400SS
UHF log periodic Yagi, stainless steel, 350-650MHz, 8.3dBi - 700mm
The LPY400SS log periodic yagi provides exceptionally broad bandwidth coverage across the UHF 350-650MHz frequency range. ZCG recommend mounting the LPY as high on your structure or tower as possible using the attached mounting hardware
LPY600
UHF log periodic Yagi, stainless steel, 47-820MHz, 6dBi - 470mm
The LPY600 log periodic yagi provides exceptionally broad bandwidth coverage across the UHF 470-820MHz frequency range. ZCG recommend mounting the LPY as high on your strcuture or tower as possible using the attached mounting hardware
LPY600-AL
UHF log periodic Yagi, aluminium, 470-820MHz, 6dBi - 470mm
The LPY600-AL log periodic Yagi provides exceptionally broad bandwidth coverage across the UHF 470-820MHz frequency range. The LPY600-AL is the lightweight model of the LPY600 stainless steel log periodic Yagi. ZCG recommend mounting the LPY as high on your structure or tower as possible using the attached mounting ...
B57SS
UHF scaled monocone, stainless steel, 400-520MHz, specify 40MHz, 0dBd - 650mm
The B57SS monocone offers genuine broadband coverage and an omni-directional radiation pattern for use within the UHF 400-520MHz range. With integral ground plane, monocones also provide a low angle of radiation comparable with centre fed dipoles.
M56SS-MIL-UHF
Naval SPEC UHF monocone, stainless steel, 340-380MHz, 0dBd - 1.3m
Designed and manufactured for naval military conditions the M56SS-MIL-UHF is suited for mounting to either a naval vessel or structure where adverse weather is experienced. The N-type female is weather sealed inside a protective PVC cover with an external cable gland to seal the cable.
PDD42
UHF 2-Way Sidemount Dipole Phasing Harness - 400-520MHz
The PDD42 UHF sidemount dipole phasing harness is designed for combining the feeders of 2 sidemount dipole into a single 50 Ohm input. The antennas may be in a stack array configuration or in non-array formation. The PDD42 comes standard with a N-type Female input and 2 x N-Type Male outputs with a 50 Watt power ...
PDD44
UHF 4-way Sidemount Dipole Phasing Harness - 400-520MHz
The PDD44 UHF sidemount dipole phasing harness is designed for combining the feeders of 4 sidemount dipole into a single 50 Ohm input. The antennas may be in a stack array configuration or in non-array formation. The PDD44 comes standard with a N-type Female input and 4 x N-Type Male outputs with a 50 Watt power ...
PDD62
UHF 2-Way Sidemount Dipole Phasing Harness - 520-800MHz
The PDD62 UHF sidemount dipole phasing harness is designed for combining the feeders of 2 sidemount dipole into a single 50 Ohm input. The antennas may be in a stack array configuration or in non-array formation. The PDD62 comes standard with a N-type Female input and 2 x N-Type Male outputs with a 50 Watt power ...
PDD64
UHF 4-Way Sidemount Dipole Phasing Harness - 520-800MHz
The PDD64 UHF sidemount dipole phasing harness is designed for combining the feeders of 4 sidemount dipole into a single 50 Ohm input. The antennas may be in a stack array configuration or in non-array formation. The PDD64 comes standard with a N-type Female input and 4 x N-Type Male outputs with a 50 Watt power ...
PDY42
UHF 2-Way Yagi Phasing Harness - 400-520MHz
The PDY42 UHF Yagi phasing harness is designed for combining the feeders of 2 Yagi's into a single 50 Ohm input. The antennas may be in a stack array configuration or in non-array formation. The PDY42 comes standard with a N-type Female input and 2 x N-Type Male outputs with a 50 Watt power handling capability.
PDY44
UHF 4-Way Yagi Phasing Harness - 400-520MHz
The PDY44 UHF Yagi phasing harness is designed for combining the feeders of 4 Yagi's into a single 50 Ohm input. The antennas may be in a stack array configuration or in non-array formation. The PDY44 comes standard with a N-type Female input and 4 x N-Type Male outputs with a 50 Watt power handling capability.
PDY62
UHF 2-Way Yagi Phasing Harness - 520-800MHz
The PDY62 UHF Yagi phasing harness is designed for combining the feeders of 2 Yagi's into a single 50 Ohm input. The antennas may be in a stack array configuration or in non-array formation. The PDY62 comes standard with a N-type Female input and 2 x N-Type Male outputs with a 50 Watt power handling capability.
PDY64
UHF 4-Way Yagi Phasing Harness - 520-800MHz
The PDY64 UHF Yagi phasing harness is designed for combining the feeders of 4 Yagi's into a single 50 Ohm input. The antennas may be in a stack array configuration or in non-array formation. The PDY64 comes standard with a N-type Female input and 4 x N-Type Male outputs with a 50 Watt power handling capability.
B44
UHF sidemount dipole, aluminium, 400-520MHz, 0dBd - 290mm
The B44 aluminium UHF sidemount dipole is designed and manufactured for UHF communications within the 400-520MHz. The small design of the B44 means its will take up minimal space on your mast/tower or structure. Stacking in an array formation will increase gain and give a more directional pattern.
B44SS
UHF sidemount dipole, stainless steel 400-520MHz, 0dBd - 290mm
The B44SS stainless steel UHF sidemount dipole is designed and manufactured for UHF communications within the 400-520MHz. The small design of the B44SS means its will take up minimal space on your mast/tower or structure. Stacking the B44SS into an array will increase gain and produce a directional pattern.
B65
UHF sidemount dipole, stainless steel, 600-820MHz, 0dBd - 190mm
The B65 stainless steel sidemount dipole provides genuine broadband coverage in the UHF frequency range 600-960MHz. The small profile of the B65 results in a minimal mounting area on your structure/tower or mast.
B65F
UHF flange mount sidemount dipole, stainless steel, 600-820MHz, 0dBd - 190mm
The B65F flange mount sidemount dipole provides genuine broadband coverage in the UHF frequency range 600-960MHz. The flange mount gives the ability for the B65F to be fixed position mounted to a wall/structure or any flat surface.
B88F
UHF or Mobile phone flange mount sidemount dipole, stainless steel, 800-960MHz, 0dBd - 150mm
The B88F flange mount sidemount dipole provides genuine broadband coverage in the UHF or 3G mobile phone frequency range 800-960MHz. The flange mount allows the ability to be mounted to a wall/structure or any flat surface.
Y403
UHF 3 element scaled Yagi, aluminium, 380-520MHz, specify 20MHz, 6dBd - 700MHz
The Y403 directional scaled Yagi is designed for use within the UHF frequency range 380-520MHz, ideal for short distant directional UHF communications. Alternate versions with higher gain are available.
Y403-HH
UHF 3 element hand-held scaled Yagi, aluminium, 380-700MHz, specify 20MHz, 6dBd - 700mm
The Y303-HH hand held 3 element Yagi is suitable for portable and collapsible use within the UHF 380-700MHz range. The collapsible design of the Y403-SS allows for a compact storage for in a vehicle or restricted storage location.
Y403-R
UHF 3 element round boom scaled Yagi, aluminium, 380-520, specify 20MHz, 6dBd - 900mm
The Y403-R scaled directional round boom Yagi is custom manufactured to your specified frequency requirements. Lengths and weights will decrease with higher frequency models. Increased gain, set frequency round boom, aluminium and stainless steel models are also available
Y403-SS
UHF 3 element scaled Yagi, stainless steel, 380-520MHz, specify 20MHz, 6dBd - 700mm
The Y403-SS directional scaled Yagi is designed for use within the UHF frequency range 380-520MHz, with a customer specified 20MHz, ideal for short distant directional UHF communications. Alternative models with higher gain and aluminium construction are available.
Y406
UHF 6 element scaled Yagi, aluminium, 380-520MHz, specify 20MHz, 9dBd - 1.2m
The Y406 scaled directional Yagis is custom manufactured to your specified frequency requirements. Lengths and weights will decrease with higher frequency models. A stainless steel version of the Y406 scaled Yagi is also available, along with set frequency round boom, aluminium and stainless steel models.
Y406-4052
UHF 6 element dual dipole Yagi, aluminium, 450-520MHz, 9dBd - 1.2m
The Y406-4052 6 element UHF Yagis feature a dual dipole design which produces a genuine broadband coverage with good performance and high gain. A 9 element version is also available.
Y406A
UHF 6 Element Yagi, aluminium, 380-400MHz, 9 dBd - 1.2m
The Y406A 6 element UHF Yagi is specifically manufactured for the UHF frequency range 380-400MHz. Other Y406 models are available covering the rest of the UHF 380-520MHz range.
Y406A-SS
UHF 6 element Yagi, stainless steel, 380-400MHz, 9dBd - 1.2m
The Y406A-SS directional base station Yagi is manufactured with a fixed frequency for optimum performance across the UHF 380-400MHz. Other models of Y406-SS are availble covering the rest of the UHF 380-520MHz range.
Y406B
UHF 6 Element Yagi, aluminium, 400-420MHz, 9dBd - 1.2m
The Y406B directional base station Yagi is manufactured in fixed frequency for optimum performance across the UHF 400-420MHz. Other models of the Y406 are available covering the rest of the UHF 380-520MHz range. A economical round boom version is also available.
Y406B-SS
UHF 6 element Yagi, stainless steel, 400-420MHz, 9dBd - 1.2m
The Y406B-SS directional base station Yagi is manufactured in fixed frequency for optimum performance across the UHF 400-420MHz. Other models of Y406-SS are available covering the rest of the UHF 380-520MHz range. An aluminium round boom version is also available.
Y406C
UHF 6 element Yagi, aluminium, 420-450MHz, 9dBd - 1.2m
The Y406C 6 element UHF Yagi is specifically manufactured for the UHF frequency range 420-450MHz. Other Y406 Yagi's cover the other frequency blocks within the UHF 380-520MHz range.
Y406-CP
UHF cross polarised 6 element scaled Yagi, aluminium, 380-700MHz, 9dBd - 1.2m
A cross polarised Yagi produces a circular elliptical radiation pattern which reduces unwanted reflection and refraction of signals. This improves transmit and receive performance, particularly in hilly terrain or where there are trees, wire fencing or steel structures in the signal path.
Y406C-SS
UHF 6 element Yagi, stainless steel, 420-450MHz, 9dBd - 1.2m
The Y406C-SS directional Yagi is designed and manufactured for UHF 420-450MHz. Other models of Y406-SS are available covering the rest of UHF 380-520MHz range. A fully welded aluminium and round boom versions are also available.
Y406D
UHF 6 element Yagi, aluminium, 450-480MHz, 9dBd - 1.2m
The Y406D 6 element UHF Yagi is specifically manufactured for the UHF frequency range 450-480MHz. Other Y406 Yagi's cover the other frequency blocks within the UHF 380-520MHz range.
Y406D-SS
UHF 6 element Yagi, stainless steel, 450-480MHz, 9dBd - 1.2m
The Y406D-SS directional Yagi is designed and manufactured for UHF 450-480MHz. Other models of Y406-SS are available covering the rest of UHF 380-520MHz range. A fully welded aluminium and round boom versions are also available.
Y406E
UHF 6 element Yagi, aluminium, 480-520MHz, 9dBd - 1.2m
The Y406E 6 element UHF Yagi is specifically manufactured for the UHF frequency range 480-520MHz. Other Y406 Yagi's cover the other frequency blocks within the UHF 380-520MHz range.
Y406E-SS
UHF 6 element Yagi, stainless steel, 480-520MHz, 9dBd - 1.2m
The Y406E-SS directional Yagi is designed and manufactured for UHF 480-520MHz. Other models of Y406-SS are available covering the rest of UHF 380-520MHz range. A fully welded aluminium and round boom versions are also available.
Y406-SS
UHF 6 element scaled Yagi, stainless steel, 380-520MHz, specify 20MHz, 9dBd - 1.2m
The Y406-SS scaled directional Yagis is custom manufactured to your specified frequency requirements. Lengths and weights will decrease with higher frequency models. An aluminium version of the Y409-SS scaled Yagi is also available, along with set frequency round boom, aluminium and stainless steel models.
Y409
UHF 9 element scaled Yagi, 380-520MHz, specify 20MHz, 11.5dBd - 1.7m
The Y409 scaled directional Yagi is custom manufactured to your specified frequency requirements. Lengths and weights will decrease with higher frequency models. A stainless steel version of the Y409 scaled Yagi is also available, along with set frequency round boom, aluminium and stainless steel models.
Y409-3545
UHF 9 element dual dipole Yagi, aluminium, 350-450MHz, 11.5dBd - 1.7m
The Y409-3545 6 element UHF Yagis feature a dual dipole design which produces a genuine broadband coverage with good performance and high gain. A 6 element version and a stainless steel version are also available.
Y409-3545SS
UHF 9 element dual dipole Yagi, 350-450MHz, 11.5dBd - 1.7m
The Y406-3545SS 6 element UHF Yagi features a dual dipole design which produces a genuine broadband coverage with good performance and high gain. A 6 element version and alumininium version is also available.
Y409-4052
UHF 9 element dual dipole Yagi, aluminium, 400-520MHz, 11.5dBd - 1.475m
The Y409-4052 9 element UHF Yagi features a dual dipole design which produces a genuine broadband coverage with good performance and high gain. A 6 element version is also available.
Y409-4052SS
UHF 9 element dual dipole Yagi, stainless steel, 400-520MHz, 11.5dBd - 1.475m
The Y406-4052SS 9 element UHF Yagi features a dual dipole design which produces a genuine broadband coverage with good performance and high gain. A 6 element version and an aluminium version are also available.
Y409A
UHF 9 element Yagi, aluminium, 380-400MHz, 11.5dBd - 1.7m
The Y409A directional Yagi is designed and manufactured for UHF 420-450MHz. Other models of Y409 are available covering the rest of UHF 380-520MHz range. A fully welded stainless steel and round boom versions are also available.
Y409A-SS
UHF 9 element Yagi, stainless steel, 380-400MHz, 11.5dBd - 1.7m
The Y409A-SS directional Yagi is designed and manufactured for UHF 380-400MHz. Other models of Y406-SS are available covering the rest of UHF 380-520MHz range. A fully welded aluminium and round boom versions are also available.
Y409B
UHF 9 element Yagi, aluminium, 400-420MHz, 11.5dBd - 1.7m
The Y409B directional Yagi is designed and manufactured for UHF 400-420MHz. Other models of Y409 are available covering the rest of UHF 380-520MHz range. A fully welded stainless steel and round boom versions are also available.
Y409B-SS
UHF 9 element Yagi, stainless steel, 400-420MHz, 11.5dBd - 1.7m
The Y409B-SS directional Yagi is designed and manufactured for UHF 400-420MHz. Other models of Y406-SS are available covering the rest of UHF 380-520MHz range. A fully welded aluminium and round boom versions are also available.
Y409C
UHF 9 element Yagi, aluminium, 420-450MHz, 11.5dBd - 1.7m
The Y409C directional Yagi is designed and manufactured for UHF 420-450MHz. Other models of Y409 are available covering the rest of UHF 380-520MHz range. A fully welded stainless steel and round boom versions are also available.
Y409C-SS
UHF 9 element Yagi, stainless steel, 420-450MHz, 11.5dBd - 1.7m
The Y409C-SS directional Yagi is designed and manufactured for UHF 420-450MHz. Other models of Y406-SS are available covering the rest of UHF 380-520MHz range. A fully welded aluminium and round boom versions are also available.
Y409D
UHF 9 element Yagi, aluminium, 450-480MHz, 11.5dBd - 1.7m
The Y409D directional Yagi is designed and manufactured for UHF 450-480MHz. Other models of Y409 are available covering the rest of UHF 380-520MHz range. A fully welded stainless steel and round boom versions are also available.
Y409D-SS
UHF 9 element Yagi, stainless steel, 450-480MHz, 11.5dBd - 1.7m
The Y409D-SS directional Yagi is designed and manufactured for UHF 450-480MHz. Other models of Y406-SS are available covering the rest of UHF 380-520MHz range. A fully welded aluminium and round boom versions are also available.
Y409E
UHF 9 element Yagi, aluminium, 480-520MHz, 11.5dBd - 1.7m
The Y409C directional Yagi is designed and manufactured for UHF 420-450MHz. Other models of Y409 are available covering the rest of UHF 380-520MHz range. A fully welded stainless steel and round boom versions are also available.
Y409E-SS
UHF 9 element Yagi, stainless steel, 480-520MHz, 11.5dBd - 1.7m
The Y409E-SS directional Yagi is designed and manufactured for UHF 480-20MHz. Other models of Y406-SS are available covering the rest of UHF 380-520MHz range. A fully welded aluminium and round boom versions are also available.
Y409-SS
UHF 9 element scaled Yagi, stainless steel, 380-520MHz, specify 20MHz, 11.5dBd - 1.7m
The Y409-SS scaled directional Yagis is custom manufactured to your specified frequency requirements. Lengths and weights will decrease with higher frequency models. An aluminium version of the Y409-SS scaled Yagi is also available, along with set frequency round boom, aluminium and stainless steel models.
Y415
UHF 15 element scaled Yagi, aluminium, 380-520MHz, specify 20MHz, 14dBd - 2.5m
The Y415 scaled directional Yagis is custom manufactured to your specified frequency requirements. Lengths and weights will decrease with higher frequency models. A stainless steel version of the Y415 scaled Yagi is also available, along with set frequency round boom, aluminium and stainless steel models.
Y415A
UHF 15 element Yagi, aluminium, 380-400MHz, 14dBd - 2.5m
The Y415A directional Yagi is designed and manufactured for UHF 380-400MHz. Other models of Y415 are available covering the rest of UHF 380-520MHz range. A fully welded stainless steel and round boom versions are also available.
Y415A-SS
UHF 15 element Yagi, stainless steel, 380-400MHz, 14dBd - 2.5m
The Y415A-SS directional Yagi is designed and manufactured for UHF 380-400MHz. Other models of Y415-SS are available covering the rest of UHF 380-520MHz range. A fully welded aluminium and round boom versions are also available.
Y415B
UHF 15 element Yagi, aluminium, 400-420MHz, 14dBd - 2.5m
The Y415B directional Yagi is designed and manufactured for UHF 400-420MHz. Other models of Y415 are available covering the rest of UHF 380-520MHz range. A fully welded stainless steel and round boom versions are also available.
Y415B-SS
UHF 15 element Yagi, stainless steel, 400-420MHz, 14dBd - 2.4m
The Y415B-SS directional Yagi is designed and manufactured for UHF 400-420MHz. Other models of Y415-SS are available covering the rest of UHF 380-520MHz range. A fully welded aluminium and round boom versions are also available.
Y415C
UHF 15 element Yagi, aluminium, 420-450MHz, 14dBd - 2.3m
The Y415C directional Yagi is designed and manufactured for UHF 420-450MHz. Other models of Y415 are available covering the rest of UHF 380-520MHz range. A fully welded stainless steel and round boom versions are also available.
Y415-CP
UHF 15 element cross-polarised Yagi, aluminium, 380-520MHz, 20MHz B/W - 2.2m
The Y415CP, square boom antenna is designed for UHF circular polarised link communications. Right hand circular
Y415C-SS
UHF 15 element Yagi, stainless steel, 420-450MHz, 14dBd - 2.3m
The Y400 series of directional base station yagis are also manufactured in fixed frequency models A, B, C, D, and E each tuned for optimum performance across a separate segment of the UHF range 380 to 520MHz.
Y415D
UHF 15 element Yagi, aluminium, 450-480MHz, 14dBd - 2.2m
The Y415D directional Yagi is designed and manufactured for UHF 450-480MHz. Other models of Y415 are available covering the rest of UHF 380-520MHz range. A fully welded stainless steel and round boom versions are also available.
Y415-DD
UHF 15 element scaled Yagi, aluminium, 380-520MHz, specify 90MHz, 12dBd - 2.5m
The Y415-DD dual dipole Yagi gives the ability of a wider bandwidth over a conventional single dipole Yagi, with the same dimensions as a standard Y415 Yagi. The wider bandwidth reduces the gain of the antenna.
Y415-DP
UHF 15 element dual polarised scaled Yagi, aluminium, 380-480MHz, specify 20MHz, 14dBd - 2.1m
A dual polarised Yagi gives the ability of sending two signals from one Yagi with an offset of 90 degrees, saving space on your mounting structure. This offset disallows the signals to interact with the other.
Y415D-SS
UHF 15 element Yagi, stainless steel, 450-480MHz, 14dBd - 2.2m
The Y415D-SS directional Yagi is designed and manufactured for UHF 450-480MHz. Other models of Y415-SS are available covering the rest of UHF 380-520MHz range. A fully welded aluminium and round boom versions are also available.
Y415E
UHF 15 element Yagi, aluminium, 480-520MHz, 14dBd - 2.1m
The Y415E directional Yagi is designed and manufactured for UHF 480-520MHz. Other models of Y415 are available covering the rest of UHF 380-520MHz range. A fully welded stainless steel and round boom versions are also available.
Y415-SS
UHF 15 element scaled Yagi, 380-520MHz, specify 20MHz, 14dBd - 2.5m
The Y415-SS scaled directional Yagis is custom manufactured to your specified frequency requirements. Lengths and weights will decrease with higher frequency models. An aluminium version of the Y415 scaled Yagi is also available, along with set frequency round boom, aluminium and stainless steel models.
Y415-SS-DP
UHF 15 element dual polarised scaled Yagi, 380-520MHz, specify 20MHz, 14dBd - 2.5m
The Y415-SS-DP dual polarised stainless steel Yagi allows for 2 UHF communication frequencies to be sent out from one Yagi. The dual polarised configuration results in both planes being 90° of eachother, reducing interference or unwanted interaction. ZCG would recommend the use of a tension strut kit to hold the ...
Y415-DCB
UHF 15 element double-dipole Yagi, aluminium 470 & 625MHz - 1.9m
This brtoadband yagi covers 470 to 625 MHz, designed for data and Video on two separate frequencies, comes complete with DC block, for powered amplifiered systems
Y603-SS
UHF 3 element scaled Yagi, stainless steel, 520-700MHz, specify 30MHz, 6dBd - 700mm
The Y603-SS stainless steel scaled Yagi is ideal for shorter distance UHF links within the 520-700MHz range. Alternate versions with higher gain in either stainless steel or aluminium are also available.
Y606
UHF 6 element scaled Yagi, aluminium, 520-700MHz, specify 20MHz, 9dBd - 700mm
The Y606 scaled Yagi is ideal for shorter distance UHF links within the 520-700MHz range. Alternate versions with higher or lower gain in either stainless steel or aluminium are also available.
Y606-SS
UHF 6 element scaled Yagi, stainless steel, 520-700MHz, specify 20MHz, 9dBd - 1.2m
The Y606-SS stainless steel scaled Yagi is ideal for medium distance UHF links within the 520-700MHz range. Alternate versions with higher or lower gain in either stainless steel or aluminium are also available.
Y615-SS
UHF 15 element scaled Yagi, stainless steel, 520-720MHz, specify 20MHz, 14dBd - 1.9m
The Y615-SS scaled Yagi is ideal for long distance UHF links within the 520-700MHz range. Alternate versions with lower gain in stainless steel are also available.
Y802
UHF 2 element scaled Yagi, aluminium, 700-960MHz, specify 60MHz, 3dBd - 600mm
The Y802 directional scaled Yagi can be manufactured to cover any 60MHz you require within the UHF or Mobile phone frequency range 700-960MHz ideal for shorter distance but directional UHF or mobile phone requirements. Alternate models with higher gain or stainless steel construction are also available
Y802-SS
UHF 2 element scaled Yagi, stainless steel, 700-960MHz, specify 60MHz, 3dBd - 600mm
Design for rugged enviroments the Y802-SS offers wideband and rugged construction for use within the UHF or Mobile phon frequency range 700-960MHz in a specified 60MHz bandwidth. Alternate models with higher gain or aluminium construction are also available.
Y803
UHF 3 element scaled Yagi, aluminium, 700-960MHz, specify 60MHz, 3dBd - 700mm
The Y803 UHF directional scaled Yagi is manufactured to cover any 60MHz you require within the frequency range 700-960MHz, ideal for shorter distance but directional UHF or mobile phone requirements.
Y803-SS
UHF 3 element scaled Yagi, stainless steel, 700-960MHz, specify 60MHz, 6dBd - 700mm
The Y803-SS directional scaled Yagi are a low gain, low wind load Yagi designed for rugged coastal areas for use within the UHF or mobile phone frequency range 700-960MHz with a customer specified 60MHz. Alternate models with higher gain and aluminium construction are also available.
Y806
UHF 6 element scaled Yagi, aluminium, 700-960MHz, specify 60MHz, 9dBd - 800mm
The Y806 directional scaled 6 element Yagi is manufactured to cover any 60MHz you require within the frequency range UHF 700-960MHz. Ideal for medium distance directional UHF or Mobile phone requirements.Higher and lower gain models in either aluminium or stainless steel are also available.
Y806B
UHF 6 element Yagi, stainless steel, 870-930MHz, 9dBd - 770mm
The Y806B UHF Yagi is specifically design and manufactured for the UHF or mobile phone frequency range 870-930MHz. Alternate models with higher or lower gain and stainless steel or round boom are also available.
Y806B-SS
UHF 6 element Yagi, stainless steel, 870-930MHz, 9dBd - 770mm
The Y806B-SS UHF or mobile phone Yagi is specifically design and manufactured for the 870-930MHz frequency range. Ideal for mounting at the home or office to improve your mobile phone coverage or as a wireless data link. Alternate models with higer gain in aluminium or round boom are also available.
Y806-SS
UHF 6 element scaled Yagi, stainless steel, 700-960MHz, specify 60MHz, 9dBd - 800mm
The Y806-SS directional scaled 6 element Yagi is manufactured to cover any 60MHz you require within the frequency range UHF 700-960MHz. Ideal for medium distance directional UHF or Mobile phone requirements. Higher and lower gain models in either aluminium or stainless steel are also available.
Y809
UHF 9 element scaled Yagi, 700-960MHz, specify 60MHz, 11.5dBd - 970mm
The Y809 directional scaled 9 element Yagi is manufactured to cover any 60MHz you require within the frequency range UHF 700-960MHz. Ideal for medium distance directional UHF or Mobile phone requirements. Higher and lower gain models in either aluminium or stainless steel are also available.
Y809B
UHF 9 element Yagi, aluminium, 870-930MHz, 11.5dBd - 970mm
The Y809B UHF Yagi is specifically design and manufactured for the UHF or mobile phone frequency range 870-930MHz. Alternate models with higher or lower gain and aluminium or round boom are also available.
Y809B-SS
UHF 9 element Yagi, stainless steel, 870-930MHz, 11.5dBd - 970mm
The Y809B-SS UHF or mobile phone Yagi is specifically design and manufactured for the 870-930MHz frequency range. Ideal for mounting at the home or office to improve your mobile phone coverage or as a wireless data link. Alternate models with higer or lower gain in aluminium or round boom are also available.
Y809-SS
UHF 9 element scaled Yagi, 700-960MHz, specify 60MHz, 11.5dBd - 970mm
The Y809-SS directional scaled 9 element Yagi is manufactured to cover any 60MHz you require within the frequency range UHF 700-960MHz. Ideal for medium distance directional UHF or Mobile phone requirements. Higher and lower gain models in either aluminium or stainless steel are also available.
Y815
UHF 15 element scaled Yagi, aluminium, 700-960MHz, specify 60MHz, 14dBd - 1.85m
The Y815 directional scaled 15 element Yagi is manufactured to cover any 60MHz you require within the frequency range UHF 700-960MHz. Ideal for long distance directional UHF or Mobile phone requirements.Lower gain models in either aluminium or stainless steel are also available.
Y815B
UHF 15 element Yagi, aluminium, 852-930MHz, 14dBd - 1.85m
The Y815B UHF Yagi is specifically design and manufactured for the UHF or mobile phone frequency range 870-930MHz. Alternate models with lower gain and stainless steel or round boom are also available.
Y815B2-DMH
UHF 2-stack 15 element Yagi array, aluminium, 700-960MHz, specify 60MHz, 17dBd - 1.85m
The Y815B2-DMH is a 2-stack horizontal polarised Yagi array which produces a highly directional radiation pattern with high front-to-back ratio specifically designed for long distance point-to-point communcation links, mobile phone improvement or wireless data link applications. A vertical polarised model is availble
Y815B2-DMHB
UHF 15 element dual scaled Yagi array, aluminium, 700-906MHz, specify 60MHz, 17dBd - 1.85m
The Y815B2-DMHB is a 2-stack horizontal polarised bayed Yagi array which produces a highly directional radiation pattern with high front-to-back ratio specifically designed for long distance point-to-point communcation links. An all-stainless steel version and a vertical polarised version are also available
Y815B2-DM-SS
UHF 15 element dual Yagi array, stainless steel, 700-960MHz, specify 60MHz, 17dBd - 1.85m
Designed especially for the 700-960 Band, these dual yagi link antennas give greater gain and better performance than a single antenna.
Y815B-SS
UHF 15 element Yagi, stainless steel, 852-930MHz, 14dBd - 1.85m
The Y815B-SS UHF or mobile phone Yagi is specifically design and manufactured for the 870-930MHz frequency range. Ideal for mounting at the home or office to improve your mobile phone coverage or as a wireless data link. Alternate models with higer gain in aluminium or round boom are also available.
Y815-SS
UHF 15 element scaled Yagi, stainless steel, 700-960MHz, specify 60MHz, 14dBd - 1.85m
The Y815-SS directional scaled 15 element Yagi is manufactured to cover any 60MHz you require within the frequency range UHF 700-960MHz. Ideal for long distance directional UHF or Mobile phone requirements. Lower gain models in either aluminium or stainless steel are also available.
Y406A-R
UHF 6 element round boom Yagi, aluminium, 380-400MHz, 9dBd - 1.2m
The Y406A-R round boom Yagi is a cost effective solution for directional UHF communications within the 380-400MHz range. Other versions of the Y406-R Yagi are available covering the rest of the UHF 380-520MHz range.
Y406B-R
UHF 6 element round boom Yagi, 400-420MHz, 9dBd - 1.2m
The Y406B-R round boom Yagi is a cost effective solution for directional UHF communications within the 400-420MHz range. Other versions of the Y406-R are available covering the rest of the 380-520MHz range. A square boom version of is also available
Y406C-R
UHF 6 element round boom Yagi, 420-450MHz, 9dBd - 1.2m
The Y406C-R round boom Yagi is a cost effective solution for directional UHF communications within the 420-450MHz range. Other models of Y406-R are available covering the rest of the UHF 380-520MHz range.
Y406D-R
UHF 6 element round boom Yagi, 450-480MHz, 9dBd - 1.2m
The Y406D-R round boom Yagi is a cost effective solution for directional UHF communications within the 450-480MHz range. Other models of Y406-R are available covering the rest of the UHF 380-520MHz range.
Y406E-R
UHF 6 element round boom Yagi, 480-520MHz, 9dBd - 1.2m
The Y406E-R round boom Yagi is a cost effective solution for directional UHF communications within the 480-520MHz range. Other models of the Y406-R are available covering the rest of the UHF 380-520MHz. Square boom versions in aluminium and stainless steel are also available.
Y406-R
UHF 6 element scaled round boom Yagi, aluminium, 380-520MHz, specify 20MHz, 9dBd - 1.2m
The Y406-R scaled directional round boom Yagi is custom manufactured to your specified frequency requirements. Lengths and weights will decrease with higher frequency models. Set frequency round boom, aluminium and stainless steel models are also available
Y409A-R
UHF 9 element round boom Yagi, 380-400MHz, 11.5dBd - 1.8m
The Y409A-R round boom Yagi is a cost effective solution for directional UHF communications within the 380-400MHz range. Other versions of the Y409-R Yagi are available covering the rest of the UHF 380-520MHz range.
Y409B-R
UHF 9 element round boom Yagi, 400-420MHz, 11.5dBd - 1.7m
The Y409B-R round boom Yagi is a cost effective solution for directional UHF communications within the 400-420MHz range. Other versions of the Y409-R Yagi are available covering the rest of the UHF 380-520MHz range.
Y409C-R
UHF 9 element round boom Yagi, 420-450MHz, 11.5dBd - 1.7m
The Y409C-R round boom Yagi is a cost effective solution for directional UHF communications within the 420-450MHz range. Other versions of the Y409-R Yagi are available covering the rest of the UHF 380-520MHz range.
Y409D-R
UHF 9 element round boom Yagi, 450-480MHz, 11.5dBd - 1.7m
The Y409D-R round boom Yagi is a cost effective solution for directional UHF communications within the 450-480MHz range. Other versions of the Y409-R Yagi are available covering the rest of the UHF 380-520MHz range.
Y409E-R
UHF 9 element round boom Yagi, 480-520MHz, 11.5dBd - 1.7m
The Y409E-R round boom Yagi is a cost effective solution for directional UHF communications within the 480-520MHz range. Other versions of the Y409-R Yagi are available covering the rest of the UHF 380-520MHz range.
Y415A-R
UHF 15 element round boom Yagi, 380-400MHz, 14dBd - 2.5m
The Y415A-R round boom Yagi is a cost effective solution for directional UHF communications within the 380-400MHz range. Other versions of the Y415-R Yagi are available covering the rest of the UHF 380-520MHz range.
Y415B-R
UHF 15 element round boom Yagi, aluminium, 400-420MHz, 14dBd - 2.5m
The Y415B-R round boom Yagi is a cost effective solution for directional UHF communications within the 400-420MHz range. Other versions of the Y415-R Yagi are available covering the rest of the UHF 380-520MHz range.
Y415C-R
UHF 15 element round boom Yagi, aluminium, 420-450MHz, 14dBd - 2.5m
The ZCG Y415C-R round boom yagi is a cost effective equivalent for UHF communications within the 420-450MHz range.
Y415-DD-RSB
UHF 15 element split round boom Yagi, aluminium, 470 & 610MHz, 12dBd - 2.1m
The Y415-DD-RSB Yagi is designed as a log cell to cater for two distinct frequencies, 470 and 610MHz, to transmit Data and video. The split boom design allows for a reduced cost of transport as well as compact storage size, ideal for either termporary or semi-perminent installation. The standard mounting utilising an ...
Y415D-R
UHF 15 element round boom Yagi, aluminium, 470-490MHz, 14dBd - 2.2m
The Y415D-R round boom Yagi is a cost effective solution for directional UHF communications within the 470-490MHz range. Other versions of the Y415-R Yagi are available covering the rest of the UHF 380-520MHz range.
Y415E-R
UHF 15 element round boom Yagi, aluminium, 480-520MHz, 14dBd - 2.5m
The Y415E-R round boom Yagi is a cost effective solution for directional UHF communications within the 480-520MHz range. Other versions of the Y415-R Yagi are available covering the rest of the UHF 380-520MHz range.
Y806B-R
UHF 6 element round boom Yagi, aluminium, 870-930MHz, 9dBd - 770mm
The Y806B-R is ideal economical antenna solution for directional 870-930MHz UHF, mobile phone improvement or for wireless data link connections. Higher or lower gain in either aluminium or stainless steel are also available.
Y806-R
UHF 6 element round boom scaled Yagi, aluminium, 800-960MHz, specify 5% - 800mm
The Y806-R is a scaled, customer specifed frequency economical antenna solution for directional mobile phone improvement or wireless data link requirements. Set frequency higher and equal gain aluminium or stainless steel version are also available.
Y809B-R
UHF 9 element round boom Yagi, aluminium, 870-930MHz, 11.5dBd - 970mm
The Y809B-R is ideal economical antenna solution for directional 870-930MHz UHF, mobile phone improvement or for wireless data link connections. Higher or lower gain in either aluminium or stainless steel are also available.
Y815B-R
UHF 15 element round boom Yagi, aluminium, 870-930MHz, 14dBd - 1.85m
The Y815B-R is ideal economical antenna solution for directional 870-930MHz UHF, mobile phone improvement or for wireless data link connections. Higher or lower gain in either aluminium or stainless steel are also available.
B13
Omni-directional VHF coaxial dipole, 70-118MHz, specify 3%, 0dBd - 3.0m
The B13 omnidirectional coaxial dipole is an effective and economical VHF base station antenna. ZCG recommends mounting the B13 as high on your structure or tower as possible, using 2 x EB1-SS or 1 x UB3-SS mounting hardware.
B13SS
Omni-directional VHF coaxial dipole, 70-118MHz, specify 3%, 0dBd - 3.0m
The B13SS omnidirectional coaxial dipole is an effective and economical VHF coaxial dipole for use in VHF Communications within the 70-118MHz range. ZCG recommend mounting the B13SS as high on your structure or tower as possible using 2 x EB1-SS or 1 x UB3-SS mounting hardware.
B15
Omni-directional VHF high band coaxial dipole, 220-235MHz, specify 3%, 2.1dBi - 1.2m
The B15 VHF coaxial dipole provides an economical base station antenna solution with no compromise in either quality of construction or performance. It is ideal for omnidirectional low power transmit and recieve applications up to 100 Watts.
B19
Omni-directional VHF high band coaxial dipole, 148-174MHz, specify 3%, 0dBd - 2m
The B19 VHF coaxial dipole provides an economical base station antenna solution with no compromise in either quality of construction or performance. It is ideal for omni-directional low power transmit and recieve applications up to 100 Watts. ZCG recommend mounting the B19 as high on your structure or tower as ...
B19-SAR-164
Omni-directional VHF high band ruggedised coaxial dipole, 148-174MHz, 0dBd - 1.8m
The B19-SAR-164 ruggedised VHF coaxial dipole is a fixed position solution which provides no compromise in either quality of construction or performance. It is ideal for omni-directional low power transmit and recieve applications up to 100 Watts.
CL3642
Omni-directional VHF low band coaxial dipole, 35-42MHz, specify 1%, 0dBd - 5m
Manufactured to full commercial standard, the CL3642 omni-directional coaxial dipole can be tuned to a specified 1% bandwidth within the frequency range 35 to 42MHz. ZCG recommend mounting the CL3642 as high on your structure or tower as possible using 2 x EB1-SS or 1 x UB3-SS mounting hardware.
CL3642R
Omni-directional VHF low band ruggedised coaxial dipole, 35-42MHz, specify 1%, 0dBd - 5m
Manufactured to full commercial standard, the CL3642R omni-directional ruggedised coaxial dipole can be tuned to a specified 1% bandwidth within the frequency range 35 to 42MHz.
ZAV-7
Omni-directional VHF coaxial dipole, 150-165MHz, 0dBd - 1.5m
The ZAV-7 is made to military standards (MIL-SPEC) to ensure it can withstand the harshest of conditions and treatment. The internal are embedded in PUR foam to protect them from moisture ingress and detrimental vibrations.
CLV3
Omni-directional VHF collinear, 151-152MHz, 5.1dBi - 3.3m
The CLV3 VHF collinear is designed and manufactured to ensure long term survival and will deliver reliable performance for many years. ZCG recommend mounting the CLV3 as high on your structure or tower as possible using 2 x EB1-SS or 1 x UB3-SS mounting hardware.
CLV3-174
Omni-directional VHF collinear, 173.9MHz, 3dBd - 3.0m
The CLV3-174 VHF base station collinear is designed and manufactured to ensure long term survival and will deliver reliable performance for many years. ZCG recommend mounting the CLV3-174 as high on your structure or tower as possible using 2 x EB1-SS or 1 x UB3-SS mounting hardware
G11
Omni-directional VHF collinear, 70-85MHz, specify 3%, 3dBd - 5.6m
The G11 omni-directional VHF collinear is suitable for two-way radio and other systems operating within the 70 to 85MHz frequency range. ZCG recommend mounting the G11 as high on your structure or tower as possible using 2 x UAM180L or 2 x UAM90L mounting hardware
G12
Omni-directional VHF collinear, 85-140MHz, specify 5%, 3dBd - 4.8m
The G12 omni-directional VHF collinear is suitable for two-way radio and other systems operating within the 85-140MHz frequency range. ZCG recommend mounting the G12 as high on your structure or tower as possible using 2 x UAM180L or 2 x UAM90L mounting hardware.
G21
Omni-directional VHF collinear, 148-174MHz, specify 1%, 3dBd - 3.5m
The G21 omnidirectional VHF collinear is designed for commercial paging, trunking and general commincation systems operating within the 148-174MHz frequency range. ZCG recommend mounting the G21 as high on your structure ot tower as possible using 2 x UAM180L or 2 x UAM90L mounting hardware.
G21-R
Omni-directional VHF ruggedised collinear, 148-174MHz, specify 1%, 3dBd - 3.5m
The G21 omni-directional VHF collinear is designed for commercial paging, trunking and general commincation systems operating within the 148-174MHz frequency range. ZCG recommend mounting the G21 as high as possible using 2 x UAM180L or 2 x UAM90L mounting hardware.
G22
Omni-directional VHF collinear, 148-174MHz, specify 3%, 6dBd - 5.6m
The G22 omni-directional VHF collinear is designed for commercial paging, trunking and general commincation systems operating within the 148-174MHz frequency range. ZCG recommend mounting the G22 as high as possible on your structure or tower using 2 x UAM180L or 2 x UAM90L mounting hardware.
G23
Omni-directional VHF collinear, 148-174MHz, specify 4%, 3dBd - 3.5m
The G23 omni-directional VHF collinear is designed for commercial paging, trunking and general commincation systems operating within the 148-174MHz frequency range. ZCG recommend mounting the G23 as high on your tower or structure as possible using 2 x UAM180L or 2 x UAM90L mounting hardware.
G23-R
Omni-directional VHF ruggedised collinear, 148-174MHz, 3dBd - 3.5m
The G23-R omni-directional VHF ruggedised collinear is designed for commercial paging, trunking and general commincation systems operating within the 148-174MHz frequency range. ZCG recommend 2 x UAM180L or 2 x UAM90L for mounting. A white radome is also available upon request.
G25
Omni-directional VHF collinear, 140-174MHz, specify 3%, 4.5dBd - 4.5m
The G25 omni-directional VHF collinear is designed for commercial paging, trunking and general commincation systems operating within the 148 to 174MHz frequency range. ZCG recommend mounting the G25 as high on your tower or structure as possible using 2 x UAM180L or 2 x UAM90L mounting hardware.
RA3
VHF corner reflector, aluminium, 148-174MHz, specify 7.5MHz, 7.5dBd - 1.25m
When you require good gain together with a high front-to-back ratio, a RA3 corner reflector will provide the ideal VHF antenna solution. ZCG recommend to mount the RA3 as high on your structure or tower as possible using the supplied mounting hardware. Ensure no obstructions around the rear screen, which can reduce ...
S2B43-1C
2-stack VHF dipole array, aluminium, 148-174MHz, 4dBd - 3.3m
The S2B43-1C 2 stack VHF dipole array covers the full VHF frequency range 148 to 174MHz. ZCG recommend mounting the S2B43-1C as high on your structure or tower as possible using 2 x UAM180L or 2 x UAM90L, or alternatively you can mount so as the tower side becomes a rear screen.
S2B43-1CSS
2-stack VHF dipole array, stainless steel, 148-174MHz, 4.5dBd - 3.3m
The S2B43-1CSS 2 stack VHF dipole array covers the full VHF frequency range 148 to 174MHz. ZCG recommend mounting the S2B43-1CSS as high on your structure or tower as possible using 2 x UAM180L or 2 x UAM90L, or alternatively you can mount so as the tower side becomes a rear screen.
S4B43-1C
4-stack VHF dipole array, aluminium, 148-174MHz, 7dBd - 5.6m
The S4B43-1C 4 stack VHF dipole array covers the full VHF frequency range 148 to 174MHz. ZCG recommend mounting the S4B43-1C as high on your structure or tower as possible using 2 x UAM180L or 2 x UAM90L, or alternatively you can mount so as the tower side becomes a rear screen.
S4B43-1CSS
4-stack VHF dipole array, stainless steel, 148-174MHz, 7dBd - 5.6m
The S4B43-1C 2 stack VHF dipole array covers the full VHF frequency range 148 to 174MHz. ZCG recommend mounting the S4B43-1C as high on your structure or tower as possible using 2 x UAM180L or 2 x UAM90L, or alternatively you can mount so as the tower side becomes a rear screen.
LPY100-500
VHF and UHF log periodic Yagi, aluminium, 100-500MHz, 7dBi - 2.5m
For applications requiring a directional signal with genuine broadband coverage across the entire VHF and UHF frequency range 100 to 500MHz, the LPY100-500 log periodic Yagi offers the ideal solution.
LPY100-500SS
VHF and UHF log periodic Yagi, stainless steel, 100-500MHz, 7dBi - 2.5m
For applications requiring a directional patter with genuine broadband coverage across the entire VHF and UHF frequency range 100 to 500MHz, the LPY100-500SS log periodic Yagi offers the ideal solution.
LPY200-300
VHF log periodic Yagi, aluminium, 200-300MHz, 8.2dBi - 1.2m
The LPY200-300 aluminium log periodic VHF Yagi is designed for wideband VHF communications or DAB radio applications within the VHF range 200-300MHz. ZCG recommend mounting the LPY as high on your structure as possible using the attached mounting hardware.
B54SS
VHF scaled monocone, stainless steel, 70-85MHz, specify 7MHz, 0dBd - 1.5m
The B54SS monocone offers genuine broadband coverage and an omni-directional radiation pattern with the VHF 70-85MHz range. Please specify a 7MHz frequency block or specify 7MHz requirement. With integral ground plane, monocones also provide a low angle of radiation comparable with centre fed dipoles.
B56SS
VHF scaled monocone, stainless steel, 148-174MHz, 0dBd - 1.3m
The B56SS monocone offers genuine broadband coverage and an omni-directional radiation pattern within the VHF 148-174MHz frequency range. With integral ground plane, monocones also provide a low angle of radiation comparable with centre fed dipoles.
B56SS-R
VHF ruggedised scaled monocone, stainless steel, 148-174MHz, 0dBd - 1.3m
The B56SS ruggedised monocone, offers genuine broadband coverage and an omnidirectional radiation pattern. With integral ground plane, monocones also provide a low angle of radiation. ZCG recommend mounting the B56SS as high as possible on your structure or tower to ensure a true omni-directional pattern.
M21T-GP
VHF tapered monocone with ground plane, stainless steel, 118-136 or 144-174MHz, 2.1dBi - 585mm
The M21T-GP stainless steel tapered whip with ground plane radials is the ideal lightweight and easily portable solution for VHF communications within the VHF 118-136 or 144-174 MHz range. The M21T-GP comes supplied with mounting hardware for an easy installation. Once installed, trim the radial arms to the required ...
M56SS-MIL-VHF40
Naval SPEC VHF Monocone, stainless steel, 135-175MHz, 0dBd - 1.3m
Designed and manufactured for naval military conditions the M56SS-MIL-VHF40 is suited for mounting to either a naval vessel or structure where adverse weather is experienced. ZCG recommend mounting the M56SS-MIL-VHF40 as high on your structure or vessel as possible using 2 x EB1-SS, 1 x UB3-SS or 2 x NSM-218 mounting ...
PDD22
2-way VHF sidemount dipole phasing harness, 70-85MHz, specify 10%, N-type input/output, 500W
The PDD22 phasing harness is designed for combining the feeder of 2 sidemount dipoles into a single 50 Ohm input. The antennas may be a stack array formation of sidemount dipoles. For the Yagi model see PDY22. Ensure appropriate water-proofing its applied to all terminations to ensure longevity of service life.
PDD24
4-way VHF sidemount dipole phasing harness, 70-85MHz, specify 10%, N-type input/output, 500W
The PDD24 phasing harness is designed for combining the feeder of 4 sidemount dipoles into a single 50 Ohm input. The antennas may be a stack array formation of sidemount dipoles. For the Yagi model see PDY24. Ensure appropriate water-proofing its applied to all terminations to ensure longevity of service life.
PDD32
2-way VHF sidemount dipole phasing harness, 148-174MHz, specify 10%, N-type input/output, 500W
The PDD32 phasing harness is designed for combining the feeder of 2 sidemount dipoles into a single 50 Ohm input. The antennas may be a stack array formation of sidemount dipoles. For the Yagi model see PDY32. Ensure appropriate water-proofing its applied to all terminations to ensure longevity of service life.
PDD34
4-way VHF sidemount dipole phasing harness, 148-174MHz, specify 10%, N-type input/output, 500W
The PDD34 phasing harness is designed for combining the feeder of 4 sidemount dipoles into a single 50 Ohm input. The antennas may be a stack array formation of sidemount dipoles. For the Yagi model see PDY34. Ensure appropriate water-proofing its applied to all terminations to ensure longevity of service life.
PDY22
2-way VHF Yagi phasing harness, 70-85MHz, specify 10%, N-type input/output, 500W
The PDY22 phasing harness is designed for combining the feeder of 2 Yagi's into a single 50 Ohm input. The antennas may be a stack array formation of Yagi's. For the sidemount dipole model see PDD22. Ensure appropriate water-proofing its applied to all terminations to ensure longevity of service life.
PDY24
4-way VHF Yagi phasing Harness, 70-85 MHz, specify 10%, N-type input/output, 500W
The PDY24 phasing harness is designed for combining the feeder of 4 Yagi's into a single 50 Ohm input. The antennas may be a stack array formation of Yagi's. For the sidemount dipole model see PDD24. Ensure appropriate water-proofing its applied to all terminations to ensure longevity of service life.
PDY-2CP
VHF 2-way CP Yagi phasing harness, 70-118MHz, specify 10%, N-type input/output, 250W
The PDY-2CP phasing harness can be used to turn a dual polarised Yagi into a circular polarised Yagi .One arm 90 degrees out of phase with the other. It can give the Yagi either right handed or left handed polarisation.
PDY32
2-way VHF Yagi phasing harness, 148-174MHz, specify 10%, N-type input/output, 500W
The PDY32 phasing harness is designed for combining the feeder of 2 Yagi's into a single 50 Ohm input. The antennas may be a stack array formation of Yagi's. For the sidemount dipole model see PDD32. Ensure appropriate water-proofing its applied to all terminations to ensure longevity of service life.
PDY34
4-way VHF Yagi phasing harness, 148-174MHz, specify 10%, N-type input/output, 500W
The PDY34 phasing harness is designed for combining the feeder of 4 Yagi's into a single 50 Ohm input. The antennas may be a stack array formation of Yagi's. For the sidemount dipole model see PDD34. Ensure appropriate water-proofing its applied to all terminations to ensure longevity of service li
PDY52B
2-way VHF Yagi phasing harness, 108-118MHz, specify 10%, N-type input/output, 500W
The PDY52B phasing harness is designed for combining the feeder of 2 Yagi's into a single 50 Ohm input. The antennas may be a stack array formation of Yagi's. Ensure appropriate water-proofing its applied to all terminations to ensure longevity of service life.
PDY54B
4-way VHF Yagi phasing harness, 108-118MHz, specify 10%, N-type input/output, 500W
The PDY54B phasing harness is designed for combining the feeder of 4 Yagi's into a single 50 Ohm input. The antennas may be a stack array formation of Yagi's. Ensure appropriate water-proofing its applied to all terminations to ensure longevity of service life.
B39
VHF sidemount dipole, aluminium, 38-44MHz, 0dBd - 3.0m
The B39 VHF sidemount dipole provides broad bandwidth with each model covering the entire VHF 38-44MHz communication band. Stacking in an array formation will increase gain and give a more directional pattern.
B40
VHF sidemount dipole, aluminium, 45-50MHz, 0dBd - 2.7m
The B40 VHF sidemount dipole provides exceptionally broad bandwidth, covering the entire 45-50MHz VHF communication band. Stacking in an array formation will increase gain and give a more directional pattern.
B41
VHF sidemount dipole, aluminium, 70-85MHz, 0dBd - 2.0m
The B41 VHF sidemount dipole provides exceptionally broad bandwidth, covering the entire 70-85MHz VHF communication band. Stacking in an array formation will increase gain and give a more directional pattern.
B41SS
VHF sidemount dipole, stainless steel, 70-85MHz, 250W, 0dBd - 2.0m
The B41SS VHF sidemount dipole provides exceptionally broad bandwidth, covering the entire 70-85MHz VHF communication band. Stacking in an array formation will increase gain and give a more directional pattern.
B43
VHF sidemount dipole, aluminium, 148-174MHz, 0dBd - 785mm
The B43 is designed for use as a VHF communications sidemount dipole, the B43 is manufactured for the 148-174MHz range. Stacking in an array formation will increase gain and give a more directional pattern.
B43SS
VHF sidemount dipole, stainless steel, 148-174MHz, 0dBd - 785mm
The B43SS is designed for use as a VHF communications sidemount dipole. The B43SS all stainless steel sidemount dipole is manufactured for the 148-174MHz range. Stacking in an array formation will increase gain and give a more directional pattern.
Y102
VHF 2 element scaled Yagi, aluminium, 40-69MHz, specify 2%, 3dBd - 2.2m
The Y102 2 element VHF Yagi is designed and manufactured for the VHF frequency range 40 to 69MHz. ZCG recommend mounting the Y102 as high on your structure or tower as possible using 1 x Y2300 mounting hardware
Y102SS
VHF 2 element Yagi, stainless steel, 40-69MHz, specify 2%, 3dBd - 2.2m
The Y102SS 2 element VHF Yagi is designed and manufactured for the VHF frequency range 40 to 69MHz. ZCG recommend mounting the Y102SS as high on your structure or tower as possible using 1 x Y2300SS mounting hardwarez.
Y103
VHF 3 element Yagi, aluminium, 40-69MHz, specify 2%, 6dBd - 3.4m
The Y103 3 element VHF Yagi is designed and manufactured for the VHF frequency range 40 to 69MHz. ZCG recommend mounting the Y103 as high on your structure or tower as possible using 1 x Y2300 mounting hardware
Y103SS
VHF 3 element Yagi, stainless steel, 40-69MHz, specify 2%, 6dBd - 3.4m
The Y103SS 3 element VHF Yagi is designed and manufactured for the VHF frequency range 40 to 69MHz. ZCG recommend mounting the Y103SS as high on your structure or tower as possible using 1 x Y2300SS mounting hardware
Y104
VHF 4 element Yagi, aluminium, 40-69MHz, specify 2%, 7.5dBd - 4.6m
The Y104 4 element VHF Yagi is designed and manufactured for the VHF frequency range 40 to 69MHz. ZCG recommend mounting the Y104 as high on your structure or tower as possible using 1 x Y2300 mounting hardware
Y106
VHF 6 element Yagi, aluminium, 40-69MHz, specify 2%, 9dBd - 6.0m
The Y106 6 element VHF Yagi is designed and manufactured for the VHF frequency range 40 to 69MHz. ZCG recommend mounting the Y106 as high on your structure or tower as possible using 1 x Y2300 and a strut kit mounting hardware
Y202
VHF 2 element Yagi, aluminium, 70-108MHz, specify 4%, 3dBd - 1.8m
The Y202 2 element VHF Yagi is specifically designed and manufactured to cover the VHF frequency range 70-108MHz. ZCG recommend mounting the Y202 as high on your tower or structure as possible using 1 x Y2300 mounting hardware.
Y203
VHF 3 element scaled Yagi, aluminium, 70-108MHz, specify 4%, 6dBd - 2.7m
The Y203 3 element VHF Yagi is specifically designed and manufactured to cover the VHF frequency range 70-108MHz. ZCG recommend mounting the Y203 as high on your tower or structure as possible using 1 x Y2300 mounting hardware.
Y203-SS
VHF 3 element Yagi, stainless steel, 70-108MHz, specify 4%, 6dBd - 2.7m
The Y203-SS 3 element VHF Yagi is specifically designed and manufactured to cover the VHF frequency range 70-108MHz. ZCG recommend mounting the Y203-SS as high on your tower or structure as possible using 1 x Y2300-SS mounting hardware.
Y204
VHF 4 element Yagi, aluminium, 70-108MHz, specify 4%, 7dBd - 3.5m
The Y204 4 element VHF Yagi is specifically designed and manufactured to cover the VHF frequency range 70-108MHz. ZCG recommend mounting the Y204 as high on your tower or structure as possible using 1 x Y2300 mounting hardware.
Y204-SS
VHF 4 element Yagi, stainless steel, 70-108MHz, specify 4%, 7dBd - 3.5m
The Y204-SS 4 element VHF Yagi is specifically designed and manufactured to cover the VHF frequency range 70-108MHz. ZCG recommend mounting the Y204-SS as high on your tower or structure as possible using 1 x Y2300-SS mounting hardware.
Y206
VHF 6 element Yagi, aluminium, 70-108MHz, specify 4%, 9dBd - 5m
The Y206 6 element VHF Yagi is specifically designed and manufactured to cover the VHF frequency range 70-108MHz. ZCG recommend mounting the Y206 as high on your tower or structure as possible using 1 x Y2300 and strut kit.
Y206SS
VHF 6 element Yagi, stainless steel, 70-108MHz, specify 4%, 9dBd - 5.0m
The Y206SS 6 element VHF Yagi is specifically designed and manufactured to cover the VHF frequency range 70-108MHz. ZCG recommend mounting the Y206SS as high on your tower or structure as possible using 1 x Y2300-SS and strut kit.
Y303
VHF 3 element Yagi, aluminium, 100-250MHz, specify 4%, 6dBd - 1.8m
The Y303 Yagi is specifically designed and manufactured for the VHF 100-250MHz frequency range. Higher gain models are available. ZCG recommend mounting the Y303 as high on your structure, building or tower as possible using 1 x Y2300 mounting hardware.
Y303-HH-BNC
VHF 3 element hand-held collapsible Yagi, aluminium, 100-250MHz, specify 4%, 6dBd - 1.2m
The Y303-HH-BNC is a customisable/scaled Yagi designed for in the field VHF applications within the 100-250MHz range. The collapsible design allows for mobile storage within a vehicle. ZCG recommend when in use, keep the Y303-HH-BNC extended from your body as far as possible to reduce any interference.
Y303-SS
VHF 3 element Yagi, stainless steel, 100-250MHz, specify 4%, 6dBd - 1.8m
The Y303-SS Yagi is specifically designed and manufactured for the VHF 100-250MHz frequency range. Higher gain models are available. ZCG recommend mounting the Y303-SS as high on your structure, building or tower as possible using 1 x Y2300-SS mounting hardware.
Y304
VHF 4 element Yagi, aluminium, 100-250MHz, specify 4%, 7.5dBd - 2.2m
The Y304 Yagi is specifically designed and manufactured for the VHF 100-250MHz frequency range. Higher gain models are available. ZCG recommend mounting the Y304 as high on your structure, building or tower as possible using 1 x Y2300 mounting hardware.
Y304-SS
VHF 4 element Yagi, stainless steel, 100-250MHz, specify 4%, 7.5dBd - 2.2m
The Y304-SS Yagi is specifically designed and manufactured for the VHF 100-250MHz frequency range. Higher gain models are available. ZCG recommend mounting the Y304-SS as high on your structure, building or tower as possible using 1 x Y2300-SS mounting hardware.
Y306
VHF 6 element Yagi, aluminium, 100-250MHz, specify 4%, 9dBd - 3.0m
The Y306 Yagi is specifically designed and manufactured for the VHF 100-250MHz frequency range. Higher gain models are available. ZCG recommend mounting the Y306 as high on your structure, building or tower as possible using 1 x Y2300 and strut kit.
Y306-SS
VHF 6 element Yagi, stainless steel, 100-250MHz, specify 4%, 9dBd - 3.0m
The Y306-SS Yagi is specifically designed and manufactured for the VHF 100-250MHz frequency range. Higher gain models are available. ZCG recommend mounting the Y306-SS as high on your structure, building or tower as possible using 1 x Y2300 and strut kit.
Y309
VHF 9 element Yagi, aluminium, 100-250MHz, specify 4%, 11.5dBd - 4.0m
The Y309 Yagi is specifically designed and manufactured for the VHF 100-250MHz frequency range. Lower gain models are available. ZCG recommend mounting the Y309 as high on your structure, building or tower as possible using 1 x Y2300 and strut kit.
Y309-SS
VHF 9 element Yagi, stainless steel, 100-250MHz, specify 4%, 11.5dBd - 4.0m
The Y309-SS Yagi is specifically designed and manufactured for the VHF 100-250MHz frequency range. Lower gain models are available. ZCG recommend mounting the Y309-SS as high on your structure, building or tower as possible using 1 x Y2300-SS and strut kit.
ZVVP-1
DAB Radio vertical polarised dual dipole panel, stainless steel, 174-230MHz, 8dBd - 1.3m
The ZVVP-1 is a vertically polarised DAB radio (Digital Audio Broadcasting) panel covering the entire DAB Radio frequency range 174-230MHz. These panels can be installed in arrays to increase gain and signal pattern. ZCG recommend mounting the ZVVP-1 as high on your tower as possible.
ZVVP-2
DAB Radio vertical polarised 2 panel array, stainless steel, 174-230MHz, 11dBd - 1.3m per panel
The ZVVP-2 is a 2 panel vertically polarised DAB radio (Digital Audio Broadcasting) array covering the entire DAB Radio frequency range 174-230MHz. ZCG recommend mounting the ZVVP-2 as high on your tower as possible.
B205BSS
DAB Radio sidemount dipole, stainless steel, 174-230MHz, 0dBd - 670mm
The B205BSS is a sidemount dipole specifically designed and manufactured for DAB Radio (digital audio broadcast) working with the VHF frequency range 174-230MHz. ZCG recommend mounting the B205BSS as high on your structure or tower as possible using 1 x Y2300-SS mounting hardware.
S4B205-1CSS-X
DAB Radio 4-stack dipole array, stainless steel, 205MHz, 7.5dBd - 3.9m
The S2B205/1C-SS-X, 4 stack dipole array tuned to 205 MHz with a specified 50MHz bandwidth. Down tilt as requested
S4B250-1CSS
DAB Radio 4-stack dipole array, stainless steel, 200-400MHz, 7dBd - 3.9m
The S2B250/1C-SS, 4 stack dipole arrays work within the frequency range 200 to 400MHz, with a specified 50MHz bandwidth.
DAB-VD-716
DAB Radio vertical dipole, stainless steel, 174-230MHz, specify 45MHz, 0dBd - 500mm
The DAB-VD is a medium powered vertical dipole for DAB Radio (Digital Audio Broadcast). It has been specifically developed so it can used in a pressurised system. The DAB-VD-716 can be mounting in an array configuration to increase gain and signal pattern. ZCG recommend mounting the DAB-VD-716 as high on your tower as ...
DAB-VD-78
DAB Radio scaled vertical dipole, 304 stainless steel, 174-230MHz, specify 45MHz, 5kW. 0dBd - 500mm
The DAB-VD-78 is a medium powered vertical dipole for DAB Radio (Digital Audio Broadcast). It has been specifically developed so it can used in a pressurised system. The DAB-VD-78 can be mounting in an array configuration to increase gain and signal pattern. ZCG recommend mounting the DAB-VD-78 as high on your tower ...
FMCPX-716-A
FM Radio circular polarised dipole, stainless steel, 87.5-96MHz, 7/16" DINF, -3dBd - 1.38m
The FMCPX-716 series of circular polarised dipoles are the standard for FM Radio broadcast within the 87.5-108MHz frequency range. The FMCPX-716 series come in set frequency allocation, specify a frequency band. ZCG recommend mounting the FMCPX-716-A as high on your structure as possible using the supplied mounting ...
FMCPX-716-B
FM Radio circular polarised dipole, stainless steel, 93-102MHz, 7/16" DINF, -3dBd - 1.5m
The FMCPX-716 series of circular polarised dipoles are the standard for FM Radio broadcast within the 87.5-108MHz frequency range. The FMCPX-716 series come in set frequency allocation, specify a frequency band. ZCG recommend mounting the FMCPX-716-B as high on your structure as possible using the supplied mounting ...
FMCPX-716-C
FM Radio circular polarised dipole, stainless steel, 100-108.5MHz, 7/16" DINF, -3dBd - 1.5m
The FMCPX-716 series of circular polarised dipoles are the standard for FM Radio broadcast within the 87.5-108MHz frequency range. The FMCPX-716 series come in set frequency allocation, specify a frequency band. ZCG recommend mounting the FMCPX-716-C as high on your structure as possible using the supplied mounting ...
FMCPX-78
FM Radio circular polarised dipole, stainless steel, 87.5-108MHz, specify 10MHz, 7/8" EIA - 1.38m
The FMCPX-78 series of circular polarised dipoles are the high powered standard for FM Radio broadcast within the 87.5-108MHz frequency range. The FMCPX-78 series come in set frequency allocation, or as a customer specified frequency model. ZCG recommend mounting the FMCPX-78 as high on your structure as possible ...
FMCPX-78-A
FM Radio circular polarised dipole, stainless steel, 87.5-96MHz, 7/8" EIA, -3dBd - 1.5m
The FMCPX-78 series of circular polarised dipoles are the standard for FM Radio broadcast within the 87.5-108MHz frequency range. The FMCPX-78 series come in set frequency allocation, specify a frequency band. ZCG recommend mounting the FMCPX-78-A as high on your structure as possible using the supplied mounting ...
FMCPX-78-B
FM Radio circular polarised dipole, stainless steel, 93.5-102.5MHz, 7/8" EIA, -3dBd - 1.5m
The FMCPX-78 series of circular polarised dipoles are the standard for FM Radio broadcast within the 87.5-108MHz frequency range. The FMCPX-78 series come in set frequency allocation, specify a frequency band. ZCG recommend mounting the FMCPX-78-B as high on your structure as possible using the supplied mounting ...
FMCPX-78-C
FM Radio circular polarised dipole, stainless steel, 100-108.5MHz, 7/8" EIA, -3dBd - 1.5m
The FMCPX-78 series of circular polarised dipoles are the standard for FM Radio broadcast within the 87.5-108MHz frequency range. The FMCPX-78 series come in set frequency allocation, specify a frequency band. ZCG recommend mounting the FMCPX-78-C as high on your structure as possible using the supplied mounting ...
FMCPX-N
FM Radio circular polarised dipole, stainless steel, 87.5-108MHz, specify 5MHz, -3dBd - 1.37m
The FMCPX-N broadcast dipole is the lightweight version of the standard FMCPX series. With identical performance as the FMCPX, it suits applications where weight has to be kept to a minimum. The FMCPX-N can be installed in an array formation to increase gain and signal pattern. ZCG recommend mounting as high on your ...
FMVD-MC
Omni-directional FM radio vertical dipole, 87.5-108MHz, specify 1MHz, 0dBd - 2.8m
The FMVD-MC is a ground independent vertical dipole, specifically designed and manufactured for low power FM radio transmit and receive. Mount the FMVD-MC using the mounting section and 2 x EB1-SS or 1 x UB3-SS. ZCG recommend mounting the FMVD-MC as high as possible to ensure a true omni-directional pattern.
G12HP
Omni-directional FM radio collinear, 87.5-108MHz, specify 2MHz, 3dBd - 7.4m
The G12HP collinear is specifically designed and manufactured for FM radio transmit and receive. ZCG recommend mounting the G12HP as high as possible on your structure, tower or mast using 2 x UAM180L or 2 x UAM90L mounting hardware,
FMD-CPHP-H
FM Radio mixed polarised dipole, stainless steel, 98-108MHz, specify 1MHz, -3dBd - 1.4m
Mixed polarised dipoles are an excellent choice for FM radio single transmission frequency local area coverage. Community broadcast groups with a limited budget will find these an affordable and effective option. The FMD-CPHP-H is designed and manufactured for the higher end of the FM radio band. ZCG recommend ...
FMD-CPHP-L
FM Radio mixed polarised dipole, stainless steel, 87.5-98MHz, specify 1MHz, -3dBd - 1.4m
Mixed polarised dipoles are an excellent choice for FM radio single transmission frequency local area coverage. Community broadcast groups with a limited budget will find these an affordable and effective option. The FMD-CPHP-L is designed and manufactured for the lower end of the FM radio band. ZCG recommend mounting ...
FMD-CPHP-R
FM Radio mixed polarised dipole, reflector bars, stainless steel, 87.5-108MHz, specify 1MHz - 1.4m
A FMD-CPHP-R mixed polarised dipole with reflector bars is a light weight solution for areas where front-to-back plays a big part in the radio coverage. The FMD-CPHP-R can be installed in an array configuration to increase gain and signal pattern. ZCG recommend mounting as high as possible on your tower using the ...
FMD-CPHP-RS1-SS
FM Radio mixed polarised dipole and rear screen, stainless steel, 87.5-108MHz, specify 1MHz - 1.4m
The FMD-CPHP-RS1-SS is designed to give a null to the rear of the antenna, allowing for directional coverage. This antenna can be mounted into an array configuration to increase gain and signal pattern. ZCG recommend mounting the FMD-CPHP-RS1-SS as high on your tower as possible.
FMD-CPLP-H
FM Radio mixed polarised dipole, stainless steel, 98-108MHz, specify 1MHz, -3dBd - 1.4m
Mixed polarised dipoles are an excellent choice for FM radio single transmission frequency local area coverage. Community broadcast groups with a limited budget will find these an affordable and effective option. The FMD-CPLP-H is designed and manufactured for the higher end of the FM radio band. ZCG recommend ...
FMD-CPLP-L
FM Radio mixed polarised dipole, stainless steel, 87.5-98MHz, specify 1MHz, -3dBd - 1.4m
Mixed polarised dipoles are an excellent choice for FM radio single transmission frequency local area coverage. Community broadcast groups with a limited budget will find these an affordable and effective option. The FMD-CPLP-L is designed and manufactured for the lower end of the FM radio band. ZCG recommend mounting ...
FMD-CPLP-R
FM Radio mixed polarised dipole, reflector bars, stainless steel, 87.5-108MHz, specify 1MHz - 1.4m
A FMD-CPLP-R mixed polarised dipole with reflector bars is a light weight solution for areas where front-to-back plays a big part in the radio coverage. The FMD-CPLP-R can be installed in an array configuration to increase gain and signal pattern. ZCG recommend mounting as high as possible on your tower using the ...
FM-ZCPD
FM Radio mixed/circular polarised panel, stainless steel, 87.5-108MHz, specify 10MHz 7.6dBd - 2.2m
The FM-ZCPD is a 4 Dipole FM broadcast Panel that offers true circular or mixed fields. The FM-ZCPD will work within a customer specified 10MHz band coverage which permits multiple broadcast frequencies and antenna sharing. ZCG recommend mounting the FM-ZCPD as high on your tower as possible using appropriate mounting ...
FM-ZCPD-1
FM Radio vertical dipole panel, stainless steel, 87.5-108MHz, specify 10MHz, 7.5dBi - 2.2m
The FM-ZCPD-1 is a vertically polarised FM broadcast panel that can cover a customer specified 10MHz inside the FM Radio broadcast band 87.5-108MHz. Allowing for improved coverage and/or multiple broadcast frequencies and antenna sharing. ZCG recommend mounting the FM-ZCPD-1 as high on your tower or structure as ...
FM-ZCPD-W
FM Radio mixed/circular polarised panel, stainless steel, 87.5-108MHz, specify 10MHz 7.6dBd - 2.2m
The FM-ZCPD-W is a 4 dipole FM broadcast panel that offers true circular or mixed fields. The FM-ZCPD-W covers the entire FM band coverage which permits multiple broadcast frequencies and antenna sharing. ZCG recommend mounting the FM-ZCPD as high on your tower as possible using appropriate mounting hardware to suit ...
FM-ZHPD
FM Radio 2 dipole horizontal panel, stainless steel. 87.5-108MHz, specify 10MHz, 7.5dBd - 2.5m
The FM-ZHPD is a horizontally polarised FM broadcast panel that can cover a customer specified 10MHz inside the FM Radio broadcast band 87.5-108MHz. This allows for improved coverage and/or multiple broadcast frequencies and antenna sharing. If you require a vertically polarised version please see the FM-ZVPD. ZCG ...
FM-ZVPD
FM Radio 2 dipole vertical panel, 87.5-108MHz, specify 10MHz, 6.5dBd - 2.5m
The FM-ZVPD is a vertically polarised FM broadcast panel that offers true circular field with 10MHz bandwidth within the FM Radio broadcast range and allows for improved coverage and/or multiple broadcast frequencies and antenna sharing.
B46BHPSS
FM Radio sidemount dipole, stainless steel, 87.5-108MHz, specify 10MHz, 2kW, 0dBd - 1.4m
The B46BHPSS medium power sidemount dipole is the ideal choice for use as an FM radio broadcast antenna or as a standby broadcast antenna. Their reliable, tried and tested construction, and broadband coverage allows for a single antenna to be shared with multiple FM transmit frequencies. ZCG recommend mounting the ...
B46BSS
FM Radio sidemount dipole, stainless steel, 87.5-108MHz, 0dBd - 1.4m
The B46BSS sidemount dipole is an ideal choice for use as an FM radio broadcast antenna or as a standby boradcast antenna. It will cover a broad bandwidth and permit single antenna sharing with multiple FM transmit frequencies. ZCG recommend mounting the B46BSS as high on your tower or structure as possible using 1 x ...
FMD
FM radio high power dipole, stainless steel, 87.5-108MHz, specify 6MHz, 5kW - 1.5m
The FMD is a medium power dipole for FM Radio broadcast, designed to be used in a pressurised system.
FMD-R
FM Radio high power round boom dipole, stainless steel, 87.5-108MHz, 0dBd - 1.5m
The FMD is a medium to high power dipole suitable for FM Radio broadcast, designed to be used in a pressurised system. Stacking the FMD-R will increase the gain and signal pattern of your system. ZCG recommend mounting the FMD-R as high on your tower or structure as possible using the supplied mounting hardware.
FMCPY2
FM Radio cross polarised Yagi, aluminium, 87.5-108MHz, 1dBd - 1.6m
The FMCPY2 is a cross polarised FM broadcast Yagi that offers true circular field with full band coverage which permits multiple broadcast frequencies and antenna sharing. The FMCPY2 can be installed in an array configuration to increase gain and signal pattern. ZCG recommend mounting the FMCPY2 as high on your mast ...
FMCPY2-716
FM Radio cross polarised Yagi, aluminium, 87.5-108MHz, 4kW, 1dBd - 1.6m
The FMCPY2-716 is a cross polarised FM broadcast Yagi that offers true circular field with full band coverage which permits multiple broadcast frequencies and antenna sharing. The FMCPY2-716 can be installed in an array configuration to increase gain and signal pattern. ZCG recommend mounting the FMCPY2-716 as high on ...
FMCPY2-716SS
FM Radio cross polarised Yagi, stainless steel, 87.5-108MHz, 7/16" DINF, 1dBd - 1.6m
The FMCPY2-716SS is a cross polarised FM broadcast Yagi that offers true circular field with full band coverage which permits multiple broadcast frequencies and antenna sharing. The FMCPY2-716SS can be installed in an array configuration to increase gain and signal pattern. ZCG recommend mounting the FMCPY2-716SS as ...
Y202CP
FM Radio cross polarised 2 element Yagi, aluminium, 87.5-108MHz, specify 4% 3dBd - 1.9m
The Y202CP cross polarised 2 element Yagi is specifically designed and manufactured for low power FM Radio transmit or receive. ZCG recommend mounting the Y202CP as high on your structure as possible using 1 x Y2300 mounting hardware.
Y202CPSS
FM Radio cross polarised 2 element Yagi, stainless steel, 87.5-108MHz, specify 4%, 3dBd - 1.9m
The Y202CPSS cross polarised 2 element Yagi is specifically designed and manufactured for low power FM Radio transmit or receive. ZCG recommend mounting the Y202CPSS as high on your structure as possible using 1 x Y2300-SS mounting hardware.
Y203B
FM Radio 3 element Yagi, aluminium, 87.5-108MHz, specify 4MHz, 6dBd - 2.7m
The Y203B Yagi is specifically designed and manufactured for FM Radio broadcast or receive within the 87.5-108MHz frequency range. ZCG recommend mounting the Y203B as high on your structure or tower as possible using 1 x Y2300 mounting hardware.
Y203BSS
FM Radio 3 element Yagi, stainless steel, 87.5-108MHz, specify 4MHz, 6dBd - 2.7m
The Y203BSS Yagi is specifically designed and manufactured for FM Radio broadcast or receive within the 87.5-108MHz frequency range. ZCG recommend mounting the Y203BSS as high on your structure or tower as possible using 1 x Y2300-SS mounting hardware.
Y204B
FM Radio 4 element Yagi, aluminium, 87.5-108MHz, specify 4%, 7.5dBd - 3.5m
The Y204B Yagi is specifically designed and manufactured for FM Radio broadcast or receive within the 87.5-108MHz frequency range. ZCG recommend mounting the Y204B as high on your structure or tower as possible using 1 x Y2300 mounting hardware.
Y204BSS
FM Radio 4 element Yagi, stainless steel, 87.5-108MHz, specify 4%, 7.5dBd - 3.4m
The Y204BSS Yagi is specifically designed and manufactured for FM Radio broadcast or receive within the 87.5-108MHz frequency range. ZCG recommend mounting the Y204BSS as high on your structure or tower as possible using 1 x Y2300-SS mounting hardware.
Y204CP
FM Radio cross polarised 4 element Yagi, aluminium, 87.5-108MHz, specify 4%, 6dBd - 3.7m
The Y204CP cross polarised Yagi is specifically designed and manufactured for FM radio transmit and receive with a circular elliptical pattern. ZCG recommend mounting the Y204CP as high on your structure or tower as possible using 1 x Y2300 and a strut kit.
Y204CPSS
FM Radio cross polarised 4 element Yagi, stainless steel, 87.5-108MHz, specify 4%, 6dBd - 3,7m
The Y204CPSS cross polarised Yagi is specifically designed and manufactured for FM radio transmit and receive with a circular elliptical pattern. ZCG recommend mounting the Y204CPSS as high on your structure or tower as possible using 1 x Y2300-SS and a strut kit.
Y206B
FM Radio 6 element Yagi, aluminium, 87.5-108MHz, specify 4%, 9dBd - 5.0m
The Y206B Yagi is specifically designed and manufactured for FM Radio broadcast or receive within the 87.5-108MHz frequency range. ZCG recommend mounting the Y206B as high on your structure or tower as possible using 1 x Y2300 and strut kit.
Y206BSS
FM Radio 6 element Yagi, stainless steel, 87.5-108MHz, specify 4%, 9dBd - 5.0m
The Y206B Yagi is specifically designed and manufactured for FM Radio broadcast or receive within the 87.5-108MHz frequency range. ZCG recommend mounting the Y206B as high on your structure or tower as possible using 1 x Y2300-SS mounting hardware.
Y206CP
FM Radio cross polarised 6 element Yagi, aluminium, 87.5-108MHz, specify 4%, 9dBd - 5m
The Y206CP cross polarised Yagi is specifically designed and manufactured for FM radio transmit and receive with a circular elliptical pattern. ZCG recommend mounting the Y206CP as high on your structure or tower as possible using 1 x Y2300 and a strut kit.
Y206CPSS
FM Radio cross polarised 6 element Yagi, stainless steel, 87.5-108MHz, specify 4%, 9dBd - 5m
The Y206CPSS cross polarised Yagi is specifically designed and manufactured for FM radio transmit and receive with a circular elliptical pattern. ZCG recommend mounting the Y206CPSS as high on your structure or tower as possible using 1 x Y2300-SS and a strut kit.
PDD22-DAB
DAB Radio 2-way phasing harness, 205MHz, N-type input/outputs, 800W
The PDD22-DAB sidemount dipole phasing harness is designed for combining the feeder of 2 antennas into a single 50 Ohm input. The antennas may be a stack array formation of DAB+ Radio sidemount dipoles. Coming standard with a N-Type Female input and 2 x N-Type Male Output and a power rating of 800 Watts.
PDD24-DAB
DAB Radio 4-way phasing harness, 205MHz, N-type input/output, 800W
The PDD24-DAB sidemount dipole phasing harness is designed for combining the feeder of 4 antennas into a single 50 Ohm input. The antennas may be a stack array formation of DAB+ Radio sidemount dipoles. Coming standard with a N-Type Female input and 4 x N-Type Male Output and a power rating of 800 Watts.
PDY22-DAB
DAB+ Radio 2-way Yagi phasing harness, 205MHz, N-type input/output, 800W
The PDY22-DAB Yagi phasing harness is designed for combining the feeder of 2 Yagi's into a single 50 Ohm input. The antennas may be a stack array formation of DAB+ Radio Yagi. Coming standard with a N-Type Female input and 2 x N-Type Male Output and a power rating of 800 Watts.
PDY24-DAB
DAB radio 4-way yagi phasing harness, 205MHz, specify downtilt, N-type input/output, 800W
The PDY24-DAB Yagi phasing harness is designed for combining the feeder of 2 Yagi's into a single 50 Ohm input. The antennas may be a stack array formation of DAB radio Yagi. Coming standard with a N-type female input and 4 x N-type male output and a power rating of 800 Watts.
PDD52A
FM Radio 2-way sidemount dipole phasing harness, 87.5-108.5MHz, N-type input/outputs, 500W
The PDD52A FM Radio sidemount dipole phasing harness is designed for combining the feeders of 2 sidemount dipole into a single 50 Ohm input. The antennas may be in a stack array configuration or in non-array formation. The PDD52A comes standard with a N-type Female input and 2 x N-Type Male outputs with a 500 Watt ...
PDD54A
FM Radio 4-way sidemount dipole phasing harness, 87.5-108.5MHz, N-type input/outputs, 500W
The PDD54A sidemount dipole phasing harness is designed for combining the feeders of 4 sidemount dipole into a single 50 Ohm input. The antennas may be in a stack array configuration or in non-array formation. The PDD54A comes standard with a N-type Female input and 4 x N-Type Male outputs with a 500 Watt power ...
PDY52A
FM Radio 2-way Yagi phasing harness, 87.5-108.5MHz, specify 10%, N-type input/outputs, 500W
The PDY52A Yagi phasing harness is designed for combining the feeders of 2 Yagi's into a single 50 Ohm input. The antennas may be in a stack array configuration or in non-array formation. The PDY52A comes standard with a N-type Female input and 2 x N-Type Male outputs with a 500 Watt power handling capability.
PDY-52CP
FM Radio 2-way Yagi phasing harness, 87.5-108.5MHz, specify 10MHz, N-type input/outputs, 500W
This 90 degree phasing harness allows connection to any dual element FM antenna to give circular polarisation
PDY54A
FM Radio 4-way Yagi phasing harness, 87.5-108.5MHz, specify 10%, N-type input/outputs, 500W
The PDY54A Yagi phasing harness is designed for combining the feeders of 4 Yagi's into a single 50 Ohm input. The antennas may be in a stack array configuration or in non-array formation. The PDY54A comes standard with a N-type Female input and 4 x N-Type Male outputs with a 500 Watt power handling capability.
PD2-7167162
2-way scaled power divider, 25% bandwidth, 7/16" DINF input/outputs, 2kW
Power dividers are designed to allow antennas to be mounted in a 2, 3 or 4 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters. The length and weight of power dividers will vary according to frequency. The PD2-7167162 is a scaled power divider, for set frequency allocations see ...
PD2-7167163
3-way scaled power divider, 25% bandwidth, 7/16" DINF input/outputs, 2kW
Power dividers are designed to allow antennas to be mounted in a 2, 3 or 4 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters. The length and weight of power dividers will vary according to frequency. The PD2-7167163 is a scaled power divider, for set frequency allocations see ...
PD2-7167164
4-way scaled power divider, 25% bandwidth, 7/16" DINF input/outputs, 2kW
Power dividers are designed to allow antennas to be mounted in a 2, 3 or 4 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters. The length and weight of power dividers will vary according to frequency. The PD2-7167164 is a scaled power divider, for set frequency allocations see ...
PD2-716N2
2-way scaled power divider, specify 25%, 7/16" DINF and N-type female, 1kW
Power dividers are designed to allow antennas to be mounted in a 2, 3 or 4 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters. The length and weight of power dividers will vary according to frequency. The PD2-716N is a scaled power divider, for set frequency allocations see ...
PD2-716N4
4-way scaled power divider, specify 25%, 7/16" DINF and N-type female, 2kW
Power dividers are designed to allow antennas to be mounted in a 2, 3 or 4 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters. The length and weight of power dividers will vary according to frequency. The PD2-716N4 is a scaled power divider, for set frequency allocations see ...
PD-7167162
2-way scaled power divider, specify 10%, 7/16" DINF input/outputs, 2kW
Power dividers are designed to allow antennas to be mounted in a 2, 3 or 4 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters. The length and weight of power dividers will vary according to frequency. The PD-7167162 is a scaled power divider, for set frequency allocations see ...
PD-7167163
3-way scaled power divider, specify 10%, 7/16" DINF input/outputs, 2kW
Power dividers are designed to allow antennas to be mounted in a 2, 3 or 4 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters. The length and weight of power dividers will vary according to frequency. The PD-7167163 is a scaled power divider, for set frequency allocations see ...
PD-7167164
4-way scaled power divider, specify 10%, 7/16" DINF input/outputs, 2kW
Power dividers are designed to allow antennas to be mounted in a 2, 3 or 4 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters. The length and weight of power dividers will vary according to frequency. The PD-7167164 is a scaled power divider, for set frequency allocations see ...
PD-716N2
2-way power divider (Specify centre frequency and 10% bandwidth) (7/16" DIN female, 2 x N-female) (1kW)
Power dividers are designed to allow antennas to be mounted in a 2, 3 or 4 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters.
PD-716N3
3-way power divider (specify C/F, 10% bandwidth, -26dB) (7/16" DIN female, 3 x N-female) (1.5Kw)
Power dividers are designed to allow antennas to be mounted in a 2, 3 or 4 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters.
PD-716N4
4-way power divider (specify C/F, 10% bandwidth, -26dB) (7/16" DIN female, 4 x N-female) (2kW)
Power dividers are designed to allow antennas to be mounted in a 2, 3 or 4 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters.
PD-716N6
6-way scaled power divider, specify 10%, 7/16" DINF and N-type female, 2kW
Power dividers are designed to allow antennas to be mounted in a 2, 3, 4 or 6 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters. The length and weight of power dividers will vary according to frequency. The PD-716N6 is a scaled power divider, for set frequency allocations see ...
PD2-7167162-200
DAB Radio 2-way power divider, 174-230MHz, specify 25%, 7/16" DINF input/outputs, 2kW
The PD2-7167162-200 is specifically designed for applications within the Digital Audio Broadcast (DAB) radio band 174-230MHz. ZCG recommend mounting the power divider with the output head facing up. Water-proofing of amalgamation tape and a layer of PVC tape should be applied to all terminations to ensure life of your ...
PD2-716N2-200
DAB Radio 2-way power divider, 174-230MHz, specify 25%, 7/16" DINF and N-type female, 1kW
The PD2-716N2-200 is specifically designed for applications within the Digital Audio Broadcast (DAB) radio band 174-230MHz. ZCG recommend mounting the power divider with the output head facing up. Water-proofing of amalgamation tape and a layer of PVC tape should be applied to all terminations to ensure life of your ...
PD2-787162-200
2-way DAB+ Radio power divider (174-230MHz, 25% bandwidth, -26 dB) (7/8" EIA, 2 x 7/16" DIN female) (4kW)
PD2-NN2-200
DAB radio 2-way power divider, 174-230MHz, specify 25%, 500W
The PD2-NN2-200 DAB radio power divider is designed to allow antennas to be mounted in a 2 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters. ZCG recommend mounting the PD2-NN2-200 using 2 x PDC-S clamps supplied with the single N-type female facing down.. Adequate ...
PD2-NN4-200
4-way DAB+ Radio power divider (174-230 MHz, 25% Bandwidth, -26 dB) (N-female, 2 x N-female) (500W)
PD-7167164-200
DAB Radio 4-way power divider, 174-230MHz, specify 10%, 7/16" DINF input/outputs, 2kW
The PD-7167164-200 is specifically designed for applications within the DAB radio band 174-230MHz. ZCG recommend mounting the power divider with the output head facing up. Water-proofing of amalgamation tape and a layer of PVC tape should be applied to all terminations to ensure life of your system. Mounting hardware ...
PD-716N2-200
2-way DAB+ Radio power divider (174-300 MHz, 10% bandwidth, -26dB) (7/16" DIN female, 2 x N-female) (1kW)
PD-716N3-200
3-way DAB+ Radio power divider (174-230 MHz, 10% bandwidth, -26dB) (7/16" DIN female, 3 x N-female) (1.5Kw)
PD-716N4-200
4-way DAB+ Radio power divider (174-230 MHz, 10% bandwidth, -26dB) (7/16" DIN female, 4 x N-female) (2kW)
PD-787162-200
2-way DAB+ Radio power divider (174-230 MHz, 10% bandwidth, -26dB) (7/8" EIA, 2 x 7/16" DIN female) (4kW)
PD-787163-200
3-way DAB+ Radio power divider (174-230 MHz, 10% bandwidth, -26dB) (7/8" EIA, 3 x 7/16" DIN female) (5kW)
PD-787164-200
4-way DAB+ Radio power divider (174-230 MHz, specify 10% bandwidth) (7/8" EIA, 4 x 7/16" DIN female) (5kW)
PD-78782-200
2-Way DAB+ Radio Power Divider, 174-230MHz, 7/8" EIA
The PD-78782-200 2-way 7/8" EIA power divider is scaled for broadcast use within the DAB+ Radio frequency range 174-230MHz. The single 7/8" EIA connector is capable of a maximum power input of 5kW split 50-50 with the 2 7/8" EIA output connectors. Standard large power divider clamps are supplied, please contact ZCG ...
PD-NN2-200
DAB radio 2-way power divider, 174-230MHz, specify 10%, 500W
The PD-NN2-200 DAB radio power divider is designed to allow antennas to be mounted in a 2 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters. ZCG recommend mounting the PD-NN2-200 using 2 x PDC-S clamps supplied with the single N-type female facing down.. Adequate ...
PD-NN3-200
3-way DAB+ Radio power divider (174-230 MHz, 10% bandwidth, -26dB) (N-female, 3 x N-female) (500W)
PD-NN4-200
4-way DAB+ Radio power divider (174-230 MHz, specify 10% Bandwidth, -26 dB) (N-female, 4 x N-females) (500W)
PD-UN-78782-2-1
2-way un-equal (2:1) DAB+ Radio power divider (200MHz, specify 10% bandwidth) (-26 dB) (7/8" EIA, 2 x 7/8" EIA) (2kW)
PD2-7167162-500
UHF Digital TV 2-way power divider, 520-820MHz, specify 25%, 7/16" DINF input/outputs, 2kW
The PD2-7167162-500 is specifically designed for applications within the UHF Digital TV band 520-820MHz. ZCG recommend mounting the power divider with the output head facing up. Water-proofing of amalgamation tape and a layer of PVC tape should be applied to all terminations to ensure life of your system. Mounting ...
PD2-716N4-500
UHF Digital TV 4-way power divider, 520-820MHz, specify 25%, 7/16" DINF and N-type female, 2kW
The PD2-716N4-500 is specifically designed for applications within the UHF Digital TV band 520-820MHz. ZCG recommend mounting the power divider with the output head facing up. Water-proofing of amalgamation tape and a layer of PVC tape should be applied to all terminations to ensure life of your system. Mounting ...
PD2-787162-500
2-way power divider (520-820MHz, 25% bandwidth, -26 dB) (7/8" EIA, 2 x 7/16" DIN female) (4kW)
PD2-NN2-500
UHF digital TV 2-way power divider, 520-700MHz, specify 25%, 500W
The PD2-NN2-500 UHF Digital TV 2-way power splitter or divider, offers 3dB out each port, low loss, all within a high quality construction. ZCG recommend mounting the PD2-NN2-500 using 2 x PDC-S clamps supplied with the single N-type female facing down.. Adequate water-proofing should be applied to all terminations.
PD2-NN3-500
3 Way UHJF power splitter
PD2-NN4-500
4-way UHF Digital TV power divider (520-820 MHz, 25% bandwidth, -26 dB) (N-female, 2 x N-female) (320W)
PD2-UN-NN2-500
2-way un-equal power divider, 520-650MHz, specify 25%, 350W
Designed to deliver unbalance power to each out put in a ratio of 5:1.
PD-7167163-500
UHF Digital TV 3-way power divider, 500-600MHz, specify 10%, 7/16" DINF input/outputs, 2kW
The PD-7167163-500 is specifically designed for applications within the UHF Digital TV band 500-600MHz. ZCG recommend mounting the power divider with the output head facing up. Water-proofing of amalgamation tape and a layer of PVC tape should be applied to all terminations to ensure life of your system. Mounting ...
PD-7167164-500
4-way UHF Digital TV power divider (500-600 MHz, 10% bandwidth, -26dB) (7/16" DIN female, 4 x 7/16" DIN female) (2kW)
PD-716N2-500
2-way UHF Digital TV power divider (520-820 MHz, 10% bandwidth, -26 dB) (7/16" DIN female, 2 x N-female) (1kW)
PD-716N3-500
3-way UHF Digital TV power divider (520-820 MHz, 10% bandwidth, -26dB) (7/16" DIN female, 3 x N-female) (1.5Kw)
PD-716N4-500
4-way UHF Digital TV power divider (520-820 MHz, 10% bandwidth -26dB) (7/16" DIN female, 4 x N-female) (2kW)
PD-787162-500
2-way UHF Digital TV power divider (520-820 MHz, 10% bandwidth, -26dB) (7/8" EIA, 2 x 7/16" DIN female) (4kW)
PD-787163-500
3-wayUHF Digital TV power divider (520-820 MHz, 10% bandwidth, -26dB) (7/8" EIA, 3 x 7/16" DIN female) (5kW)
PD-787164-500
4-way UHF Digital TV power divider (520-820 MHz, specify 10% bandwidth) (7/8" EIA, 4 x 7/16" DIN female) (5kW)
PD-78782-500
2-Way UHF Digital TV Power Divider, 520-820MHz, 7/8" EIA
The PD-78782-500 2-way 7/8" EIA power divider is scaled for broadcast use within the UHF Digital TV frequency range 520-820MHz. The single 7/8" EIA connector is capable of a maximum power input of 5kW split 50-50 with the 2 7/8" EIA output connectors. Standard large power divider clamps are supplied, please contact ...
PD-NN2-500
UHF digital TV power divider, 500-600MHz, specify 10%, 500W
The PD-NN2-500 UHF digital TV power divider is designed to allow antennas to be mounted in a 2 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters. ZCG recommend mounting the PD-NN2-500 using 2 x PDC-S clamps supplied with the single N-type female facing down.. Adequate ...
PD-NN3-500
3-way UHF Digital TV power divider (500-600 MHz, 10% bandwidth, -26dB) (N-female, 3 x N-female) (500W)
PD-NN4-500
4-way UHF Digital TV power divider (500-600 MHz, specify 10% bandwidth) (N-female, 4 x N-females) (500W)
PD-NN4-600
4-way UHF Digital TV power divider (600-700 MHz, specify 10% bandwidth) (N-female, 4 x N-females) (500W)
PD-158716-6
6 Way power divider, single stage
High powered 1/58" input with 7/16 Din female output power divider for Higher powered FM services
PD2-1581582
PD2-1581582 High powered divider
This 1 5/8" EIA power splitter is designed for FM and DAB servuices, allowing up to 10 kWatts of power distribution.
PD2-158782
High powrered 2 way FM Power divider
10 kW 2 way splitter power divider, designed for FM frequencies.
PD2-158784
4-way power divider (specify C/F, 25% bandwidth, -26 dB) (1-5/8" EIA and 4 x 7/8" EIA) (10kW)
PD2-787162
2-way scaled power divider, specify 25%, 7/8" EIA & 7/16" DINF, 4kW
Power dividers are designed to allow antennas to be mounted in a 2, 3 or 4 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters. The length and weight of power dividers will vary according to frequency. The PD2-787162 is a scaled power divider, for set frequency allocations see ...
.jpg)
PD2-787163
3-way power divider (specify C/F, 25% bandwidth, -26 dB) (7/8" EIA, 3 x 7/16" DIN female) (5kW)
Power dividers are designed to allow antennas to be mounted in a 2, 3 or 4 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters.
PD2-787164
4-Way Scaled Power Divider, Specify C/F, 7/8" EIA & 7/16" DINF, 5kW
Power dividers are designed to allow antennas to be mounted in a 2, 3 or 4 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters.
PD2-78782
2-Way Scaled Power Divider
Power dividers are designed to allow antennas to be mounted in a 2, 3 or 4 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters.
PD2-78784
4-Way Scaled Power Divider, Specify C/F, 7/8" EIA, 5kW
Power dividers are designed to allow antennas to be mounted in a 2, 3 or 4 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters.
PD-787162
2-way power divider (specify C/F, 10% bandwidth, -26dB) (7/8" EIA, 2 x 7/16" DIN female) (4kW)
Power dividers are designed to allow antennas to be mounted in a 2, 3 or 4 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters.
PD-787163
Single stage 3 way High power , power divider.
Power dividers are designed to allow antennas to be mounted in a 2, 3 or 4 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters.
PD-787164
2 Way single stage broadcast power divider
Power dividers are designed to allow antennas to be mounted in a 2, 3 or 4 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters.
PD-78782
High powered Power divider, Broadcast
Power dividers are designed to allow antennas to be mounted in a 2, 3 or 4 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters.
PD-78783
3-Way Scaled Power Divider, specify C/F, 7/8" EIA, 5kW
Power dividers are designed to allow antennas to be mounted in a 2, 3 or 4 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters.
PD-78784
4-Way Scaled Power Divider, Specify C/F, 7/8" EIA, 5kW
Power dividers are designed to allow antennas to be mounted in a 2, 3 or 4 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters.
PD-78786
6-way power divider (specify C/F, 10% bandwidth, -26dB) (7/8" EIA, 6 x 7/8" EIA) (5kW)
Power dividers are designed to allow antennas to be mounted in a 2, 3 or 4 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters.
PD2-7167162-100
FM Radio 2-way power divider, 87.5-108.5MHz, specify 25%, 7/16" DINF input/outputs, 2kW
The PD2-7167162-100 is specifically designed for applications within the FM radio band 87.5-108.5MHz. ZCG recommend mounting the power divider with the output head facing up. Water-proofing of amalgamation tape and a layer of PVC tape should be applied to all terminations to ensure life of your system. Mounting ...
PD2-787162-100
FM Radio 2-way power divider, 87.5-108.5MHz, specify 25%, 7/8" EIA & 7/16" DINF, 4kW
The PD2-787162-100 is specifically designed for applications within the FM radio band 87.5-108.5MHz. ZCG recommend mounting the power divider with the output head facing up. Water-proofing of amalgamation tape and a layer of PVC tape should be applied to all terminations to ensure life of your system.
PD2-78782-100
2-Way FM Radio Power Divider, 87.5-108.5MHz, 7/8" EIA
The PD2-78782-100 2-way 7/8" EIA power divider is scaled for broadcast use within the FM Radio frequency range 87.5-108.5MHz. The single 7/8" EIA connector is capable of a maximum power input of 5kW split 50-50 with the 2 x 7/8" EIA output connectors. Standard large power divider clamps are supplied, please contact ...
PD2-NN2-100
FM radio 2-way power divider, 87.5-108MHz, specify 25%, 500W
The PD2-NN2-100 FM radio power divider is designed to allow antennas to be mounted in a 2 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters. ZCG recommend mounting the PD2-NN2-100 using 2 x PDC-S clamps supplied with the single N-type female facing down.. Adequate ...
PD2-NN4-100
4-way FM Radio power divider (87.5-108.5 MHz, -26 dB) (N-female, 2 x N-female) (500W)
PD2-UN-787162
2-way un-equal FM Radio power divider (87.5-108.5 MHz, 25% bandwidth, -26 dB) (7/8" EIA, 2 x 7/16" DIN female) (3kW)
PD2-UN-787164-3-1
FM Radio 4-way un-equal power divider, 3:1, 87.5-108.5MHz, 7/8" EIA, 4 x 7/16" DIN female
PD-7167162-100
FM Radio 2-way power divider, 87.5-108.5MHz, specify 10%, 7/16" DINF input/outputs, 2kW
The PD-7167162-100 is specifically designed for applications within the FM radio band 87.5-108.5MHz. ZCG recommend mounting the power divider with the output head facing up. Water-proofing of amalgamation tape and a layer of PVC tape should be applied to all terminations to ensure life of your system.
PD-7167163-100
FM Radio 3-way power divider, 87.5-108.5MHz, specify 10%, 7/16" DINF input/outputs, 2kW
The PD-7167163-100 is specifically designed for applications within the FM radio band 87.5-108.5MHz. ZCG recommend mounting the power divider with the output head facing up. Water-proofing of amalgamation tape and a layer of PVC tape should be applied to all terminations to ensure life of your system. Mounting ...
PD-7167164-100
FM Radio 4-way power divider, 87.5-108.5MHz, specify 10%, 7/16" DINF input/outputs, 2kW
The PD-7167164-100 is specifically designed for applications within the FM radio band 87.5-108.5MHz. ZCG recommend mounting the power divider with the output head facing up. Water-proofing of amalgamation tape and a layer of PVC tape should be applied to all terminations to ensure life of your system. Mounting ...
PD-716N2-100
2-way FM Radio power divider (87.5-108.5 MHz, 10% bandwidth, -26 dB) (7/16" DIN female, 2 x N-female) (1kW)
PD-787162-100
2-way FM Radio power divider (87.5-108.5 MHz, 10% Bandwidth, -26dB) (7/8" EIA, 2 x 7/16" DIN female) (4kW)
PD-787163-100
Single stage 3 way High powered power divider for FM
This FM power divider is designed for 5Kw at the FM band and covers a bandwidth of 10%
PD-787164-100
4-way FM Radio power divider (87.5-108.5 MHz, specify 10% bandwidth) (7/8" EIA, 4 x 7/16" DIN female) (5kW)
PD-78782-100
High powered FM power divider single stage.
Designed for FM services these power dividers, allow two high powered antennas to be phased together.
PD-NN2-100
FM radio 2-way power divider, 87.5-108MHz, specify 10%, 500W
The PD-NN2-100 FM radio power divider is designed to allow antennas to be mounted in a 2 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters. ZCG recommend mounting the PD-NN2-100 using 2 x PDC-S clamps supplied with the single N-type female facing down.. Adequate ...
PD-NN4-100
4-way FM Radio power divider (87.5-108.5 MHz, specify 10% bandwidth, -26dB) (N-female, 4 x N-female) (500W)
PD-716N2-800
2-way power divider (800-960 MHz, 10% bandwidth, -26 dB) (7/16" DIN female, 2 x N-female) (1kW)
PD-NN2-700
4G LTE 2-way power divider, 700-820MHz, specify 10%, 500W
The PD-NN2-700 4G LTE/UHF power divider is designed to allow antennas to be mounted in a 2 stack phased array formation, whilst maintaining optimum return loss, ideal for UHF communications or 4G LTE applications. ZCG recommend mounting the PD-NN2-700 using 2 x PDC-S clamps supplied with the single N-type female ...
PD-NN2-800
3G/4G 2-way power divider, 800-960MHz, specify 10%, 500W
The PD-NN2-800 3G.and 4G mobile phone power divider is designed to allow antennas to be mounted in a 2 stack phased array formation, whilst maintaining optimum return loss, ideal for mobile phone installations. ZCG recommend mounting the PD-NN2-800 using 2 x PDC-S clamps supplied with the single N-type female facing ...
PD-NN4-700
4-way UHF power divider (700-820 MHz, specify 10% bandwidth) (N-female, 4 x N-female) (500W)
PS-2NSM-0727
2 way broadband power splitter
for 700 - 2700 MHz band, this broad band power combiner splitter is the ideal low powered splitter.
PS-8NSM-0727
8 way power divider
Broadband 8 way power divider , ideal for cellur distribution.
PD-240N2
2-way WiMAX data link power divider (2.4-2.5 GHz,- 20 dB) (N-female) (250W)
The PD-240N2 is a power divider for combining the output of tw WiMAX data link antennas operating in the 2.4 to 2.5GHz range.
PD2-NN2
2-way scaled power divider, specify 25%, N-type female, 500W
Power dividers are designed to allow antennas to be mounted in a 2, 3 or 4 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters. ZCG recommend mounting the PD2-NN2 using 2 x PDC-S clamps supplied with the single N-type female facing down.. Adequate water-proofing should be ...
PD2-NN3
3-way power divider (specify C/F, 25% bandwidth, -26 dB) (N-female, 3 x N-female) (500W)
Power dividers are designed to allow antennas to be mounted in a 2, 3 or 4 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters.
PD2-NN4
4-way power divider (specify C/F, 25% bandwidth, -26 dB) (N-female, 4 x N-female)
Power dividers are designed to allow antennas to be mounted in a 2, 3 or 4 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters.
PD-NN2
2-way scaled power divider, specify 10%, 500W
The PD-NN2 2-way power divider is designed to allow antennas to be mounted in a 2 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters. ZCG recommend mounting the PD2-NN2 using 2 x PDC-S clamps supplied with the single N-type female facing down.. Adequate water-proofing should ...
PD-NN3
3-way power divider (specify C/F, 10% bandwidth, -26dB) (N-female, 3 x N-female) (500W)
Power dividers are designed to allow antennas to be mounted in a 2, 3 or 4 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters.
PD-NN4
4-way power divider (specify C/F, 10% Bandwidth -26 dB) (N-female, 4 x N-female) (500W)
Power dividers are designed to allow antennas to be mounted in a 2, 3 or 4 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters.
PD2-716N2-400
UHF 2-way power divider, 400-520MHz, specify 25%, 7/16" DINF and N-type female, 1kW
The PD2-716N2-400 is specifically designed for applications within the UHF band 400-520MHz. ZCG recommend mounting the power divider with the output head facing up. Water-proofing of amalgamation tape and a layer of PVC tape should be applied to all terminations to ensure life of your system. Mounting hardware for the ...
PD2-NN2-400
UHF 2-way power divider, 400-520MHz, specify 25%, 500W
The PD2-NN2-400 UHF power divider is designed to allow antennas to be mounted in a 2 stack phased array formation, whilst maintaining optimum return loss, ideal for broadcasters. ZCG recommend mounting the PD2-NN2-400 using 2 x PDC-S clamps supplied with the single N-type female facing down.. Adequate water-proofing ...
PD2-NN4-400
4-way UHF power divider (400-520 MHz, 25% bandwidth, -26 dB) (N-female, 2 x N-female)
PD-7167162-200
VHF/UHF 2-way power divider, 200-400MHz, specify 10%, 7/16" DINF input/outputs, 2kW
The PD-7167162-200 is specifically designed for applications within the VHF and UHF band 200-400MHz. ZCG recommend mounting the power divider with the output head facing up. Water-proofing of amalgamation tape and a layer of PVC tape should be applied to all terminations to ensure life of your system.
PD-7167163-200
VHF/UHF 3-way power divider, 200-400MHz, specify 10%, 7/16" DINF input/outputs, 2kW
The PD-7167163-200 is specifically designed for applications within the VHF and UHF band 200-400MHz. ZCG recommend mounting the power divider with the output head facing up. Water-proofing of amalgamation tape and a layer of PVC tape should be applied to all terminations to ensure life of your system. Mounting ...
PD-716N2-400
2-way power divider (300-500 MHz, 10% bandwidth, -26dB) (7/16" DIN female, 2 x N-female) (1kW)
PD-716N3-400
3-way UHF power divider (400-520 MHz, 10% bandwidth, -26dB) (7/16" DIN female, 3 x N-female) (1.5Kw)
PD-716N4-400
4-way UHF power divider (400-520 MHz, 10% bandwidth, -26dB) (7/16" DIN female, 4 x N-female) (2kW)
PD-NN2-400
UHF 2-way power divider, 400-520MHz, specify 10%, 500W
The PD-NN2-400 UHF power divider is designed to allow antennas to be mounted in a 2 stack phased array formation, whilst maintaining optimum return loss, ideal for UHF communications. ZCG recommend mounting the PD-NN2-400 using 2 x PDC-S clamps supplied with the single N-type female facing down.. Adequate ...
PD-NN2-850
UHF STL link 2-way power divider, 850MHz, 250W
The PD-NN2-850 power divider is designed to allow UHF STL link antennas to be mounted in a 2 stack phased array formation, whilst maintaining optimum return loss, ideal for STL links between studio and transmission locations. ZCG recommend mounting the PD-NN2-850 using 2 x PDC-S clamps supplied with the single N-type ...
PD-NN3-400
3-way UHF power divider (400-520 MHz, 10% bandwidth, -26dB) (N-female, 3 x N-female) (500W)
PD-NN4-400
4-way UHF power divider (400-520 MHz, specify 10% bandwidth, -26 dB) (N-female, 4 x N-female) (500W)
RS1-GAL
FM Broadcast rear reflector screen, 1.5m x 1.5m
Galvanised Rear screen for FM antennas, allowing better front to back ratios. Includes mounting for antenna and tower mounting
RS1-SS
FM Broadcast rear reflector screen - 1.5m x 1.5m
Stainless steel rear screen for FM antennas, allowing better front to back ratios. Includes mounting for antenna and tower mounting
TV6-RS-A
Television broadcast rear reflector screen - 1.316m
The TV6-RS-A stainless steel rear reflector screen can be fitted to any of our TV6-5270-A 4-stack dipole array.
TV6-RS-B
Television broadcast rear reflector screen - 1.316m
The TV6-RS-B stainless steel rear reflector screen can be fitted to any of our TV6-5270-B 4-stack dipole array.
YFRS
Yagi flat rear screen, aluminium
The YFRS Yagi flat rear reflector screen suits all ZCG square boom Yagis where front-to-back ratio improvement is required to better than 24dB to meet the Australian Communications and Media Authority standard.
YFRS-SS
Yagi flat rear screen, stainless steel
The YFRS-SS Yagi flat rear reflector screen suits all ZCG square boom Yagis where front-to-back ratio improvement is required to better than 24dB to meet the Australian Communications and Media Authority standard.
YVRS
Yagi V-shape rear screen, aluminium
The YVRS Yagi V-shape rear reflector screen suits all ZCG square boom Yagis where front-to-back ratio improvement is required to better than -24dB to meet the Australian Communications and Media Authority standard, with improved side-lobe compression in comparison to the YFRS flat rear screen.
YVRS-SS
Yagi V-shape rear screen, stainless steel
The YVRS-SS Yagi V-shape rear reflector screen suits all ZCG square boom Yagis where front-to-back ratio improvement is required to better than -24dB to meet the Australian Communications and Media Authority standard, with improved side-lobe compression in comparison to the YFRS-SS flat rear screen.
CLG3200
Omni-directional VHF TV collinear - 130-230MHz, CH 5A-12, specify any single channel, N-female, 250W, 3dBd - 2.5m
These omnidirectional collinears are for use in low power VHF TV and UHF TV broadcast applications
CLG3900
Omni-directional UHF Digital TV collinear - 520-820MHz, CH 27-69, specify 4 adjacent channels, N-female, 250W, 3dBd - 1.2m
These omnidirectional collinears are for use in low power VHF TV and UHF TV broadcast applications
CLG6900
Omni-directional UHF Digital TV collinear - 520-820MHz, CH 27-69, specify 4 adjacent channels, N-female, 250W, 7.5dBd - 4.0m
These omnidirectional collinears are for use in low power VHF TV and UHF TV broadcast applications
TV6-5270-A
UHF Digital TV 4-stack dipole array, stainless steel - 520-650MHz, specify any 15 channels, N-female, 200W, 7.5dBd - 2.0m
These broadband UHF TV 4-stack dipole arrays are designed and manufactured for wide band vertically polarised TV transmission where high gain is required.
TV6-5270-A-MP
UHF Digital TV 4-stack dipole array, stainless steel - 520-650MHz, specify any 15 channels, 7/16" DIN female, 500W, 7.5dBd - 2.0m
These broadband UHF TV 4-stack dipole arrays are designed and manufactured for wide band vertically polarised TV transmission where high gain is required.
TV6-5270-B
UHF Digital TV 4-stack dipole array, stainless steel - 590-700MHz, specify any 15 channels, N-female, 7.5dBd, 200W - 2.0m
These broadband UHF TV 4-stack dipole arrays are designed and manufactured for wide band vertically polarised TV transmission where high gain is required
TV6-5270-B-MP
UHF Digital TV 4-stack dipole array, stainless steel - 590-700MHz, specify any 15 channels, 7/16" DIN female, 500W, 7.5 dBd - 2.0m
These broadband UHF TV 4-stack dipole arrays are designed and manufactured for wide band vertically polarised TV transmission where high gain is required
ZSL5262-LP
UHF Digital TV low power horizontal slot - 520-620MHz, CH 27-40, N-female, 200W, 9.5dBd - 3.9m
Featuring a horizontal radiation pattern and high gain, the ZSL- 5282 series of slot antennas are designed for UHF TV broadcast
ZSL5262-MP
UHF Digital TV medium power horizontal slot - 520-620MHz, CH 27-40, 7/16" DIN female, 2kW, 9.5dBd - 3.9m
Featuring a horizontal radiation pattern and high gain, the ZSL- 5262 series of slot antennas are designed for UHF TV broadcast.
ZSL5262MP-FM
UHF Digital TV flange mount medium power horizontal slot - 520-620MHz, CH 27-40, 7/8" EIA, 3kW, 9.5dBd - 3.9m
Featuring a horizontal radiation pattern and high gain, the ZSL- 5262 series of slot antennas are designed for UHF TV broadcast. This version has a Flange Mount
ZSL6172-LP
UHF TV low power horizontal slot - 610-720MHz, CH 40-54, N-female, 200W, 9.5dBd - 2.7m
Featuring a horizontal radiation pattern and high gain, the ZSL- 6172 series of slot antennas are designed for UHF TV broadcast.
ZSL6172-MP
Medium Powered Horizontal slot antenna
Featuring a horizontal radiation pattern and high gain, the ZSL- 6172 series of slot antennas are designed for UHF TV broadcast
ZSL7182-LP
UHF Digital TV low power horizontal slot - 710-820MHz, CH 54-69, N-female, 200W, 9.5dBd - 2.2m
Featuring a horizontal radiation pattern and high gain, the ZSL- 7182 series of slot antennas are designed for UHF TV broadcast.
ZSL7182-MP
UHF Digital TV medium power horizontal slot - 710-820MHz, CH 54-69, 7/16" DIN female, 2kW, 9.5dBd - 2.2m
Featuring a horizontal radiation pattern and high gain, the ZSL- 7182 series of slot antennas are designed for UHF TV broadcast.
ZSL7182MP-FM
UHF Digital TV flange mount medium power horizontal slot - 710-820MHz, CH 54-69, 7/8" EIA, 3kW, 9.5dBd - 2.0m
Featuring a horizontal radiation pattern and high gain, the ZSL- 7182 series of slot antennas are designed for UHF TV broadcast. This version has a Flange Mount
ZUHP
UHF Horizontal Broad band panel antenna
The ZUHP is a horizontal polarised broadband panel covering the entire UHF TV band IV and V
ZUHP-75
75 Ohm TV UHF Panel
The ZUHP-75 is a 75 Ohm horizontal polarised broadband panel covering the entire UHF TV band IV and V. Being a 75 Ohm panel, the power rating will be less than ZCG's 50 Ohm model ZUHP. ZCG recommend mounting the ZUHP as high on your tower or structure as possible using the supplied mounting hardware.
ZUVP
UHF Digital TV vertical polarised panel - 520-820MHz, Ch 27-69, N-female, 250W, 11dBd - 1.1m
The ZUVP is a vertical polarised broadband panel covering the entire UHF TV band IV and V.
VHF-D
VHF High Powered Dipole
The VHF-D vertical dipole can be used in VHF 173-230MHz high powered arrays, or as a stand alone VHF TV broadcast antenna. If utilising in an array formation, power dividers, branch cables and lightning protection can also be supplied, please contact your ZCG sales team for a customised solution.
Y206-1722
VHF TV 6 element dual-dipole Yagi, aluminium, 174-230MHz, 7.5dBd - 1.65m
The Y206-1722 dual dipole Yagi is designed and manufactured to cover the full VHF TV channel range 6 to 12 or 174-230MHz.They are the ideal solution for off air receive and low power transmit applications. ZCG recommend mounting the Y206-1722 as high on your structure or tower as possible using 1 x Y2300 and strut kit.
Y206-1722SS
VHF TV 6 element dual-dipole Yagi, stainless steel, 174-230MHz, 7.5dBd - 1.65m
The Y206-1722SS dual dipole Yagi is designed and manufactured to cover the full VHF TV channel range 6 to 12 or 174-230MHz.They are the ideal solution for off air receive and low power transmit applications. ZCG recommend mounting the Y206-1722SS as high on your structure or tower as possible using 1 x Y2300-SS and ...
Y209-1722
VHF TV 9 element dual-dipole Yagi, aluminium, 174-230MHz, 10.5dBd - 3.1m
The Y209-1722 dual dipole Yagi is designed and manufactured to cover the full VHF TV channel range 6 to 12 or 174-230MHz.They are the ideal solution for off air receive and low power transmit applications. ZCG recommend mounting the Y209-1722 as high on your structure or tower as possible using 1 x Y2300 and strut kit.
Y209-1722SS
VHF TV 9 element dual-dipole Yagi, stainless steel, 174-230MHz, 10.5dBd - 3.1m
The Y209-1722SS dual dipole Yagi is designed and manufactured to cover the full VHF TV channel range 6 to 12 or 174-230MHz.They are the ideal solution for off air receive and low power transmit applications. ZCG recommend mounting the Y209-1722SS as high on your structure or tower as possible using 1 x Y2300-SS and ...
Y209-1722SS-75
M.A.T.V 9 element dual-dipole 75 Ohm Yagi, stainless steel, 174-230MHz, 10.5dBd - 3.1m
The Y209-1722SS-75, 75 Ohm M.A.T.V. Yagi is specifically designed and manufactured for Mast Amplified Television (M.A.T.V.) receive systems at professional broadcast installations. ZCG recommend mounting the Y209-1722SS-75 as high as possible on your mast or tower using 1 x Y2300-SS and strut kit.
Y609TV
UHF DTV 9 element Yagi, aluminium, 520-820MHz, specify 15 Ch, 10.5dBd - 1.2m
The Y609TV aluminium dual dipole Yagi is designed and manufactured to deliver genuine broadband coverage of the UHF TV Band IV and V 520-820MHz. Higher gain models in both aluminium or stainless steel are also available.
Y609TV-SS
UHF DTV 9 element scaled Yagi, stainless steel, 520-820MHz, specify 15Ch, 10.5dBd - 1.2m
The Y609TV-SS stainless steel dual dipole Yagi is designed and manufactured to deliver genuine broadband coverage of the UHF Digital TV Band IV and V 520-820MHz. Higher gain models in both aluminium or stainless steel are also available.
Y609TV-SS-75
MATV 9 element 75 Ohm scaled Yagi, stainless steel, 520-820MHz, specify 15 Ch, 11.5dBd - 1.2m
The Y609TV-SS-75, 75 Ohm UHF Yagi is specifcally designed and manufactured for Mast Amplified TV (M.A.TV.) systems at professional broadcast installations. Alternate models with higher gain are also available.
Y615-SS-20RL
UHF DTV 15 element scaled Yagi, stainless steel, 500-700MHz, specify 5 Ch, 14dBd - 2.6m
The Y615-SS-20RL single dipole yagi is designed and manufactured to deliver any specified 5 channels within the UHF TV Band IV and V.
Y615TV
UHF DTV 15 element scaled Yagi, aluminium, 520-820MHz, specify 15 Ch, 12.1dBd - 1.85m
The Y615TV aluminium dual dipole Yagi is designed and manufactured to deliver genuine broadband coverage of the UHF TV Band IV and V 520-820MHz. Lower gain models in both aluminium or stainless steel are also available.
Y615TV-SS
UHF DTV 15 element scaled Yagi, stainless steel, 520-820MHz, specify 15 Ch, 12.1dBd - 1.85m
The Y615TV-SS stainless steel dual dipole Yagi is designed and manufactured to deliver genuine broadband coverage of the UHF Digital TV Band IV and V 520-820MHz. Lower gain models in both aluminium or stainless steel are also available.
Y615TV-SS-75
MATV 15 element 75 Ohm scaled Yagi, stainless steel, 520-820MHz, specify 15 Ch, 14dBd - 1.85m
The Y615TV-SS-75, 75 Ohm UHF Yagi is specifcally designed and manufactured for Mast Amplified TV (M.A.TV.) systems at professional broadcast installations. Alternate models with lower gain are also available.
Y815-SS-CP
UHF TV circular polarised 15 element scaled Yagi, 520-820MHz, specify 8 Ch, 13.5dBd - 2.6m
The Y815-CP series of cross polarised UHF TV broadcast yagis operate with 13.5 dBd gain in both horizontal and vertical planes. Television transmission signals will therefore penetrate into the more obscure areas that a single plane antenna simply cannot.
MGP-3850N
UHF STL Link Mini Grid-pack, 820-960MHz - 960mm
The MGP-3850N is an ideal solution for long distance or difficult terrain STL links, between transmission site and studio where space on the tower is at a premium. A N-type female is fitted to 400mm of RU400 and allows for a maximum power rating of 100 Watts. Gain performance mid band is 15.4dBic allowing for narrow ...
MGP-4650N
UHF STL Link Mini Grid-Pack, 520-670MHz - 1.2m
The MGP-4650N is an ideal solution for long distance or difficult terrain STL links, between transmission site and studio where space on the tower is at a premium. A N-type female is fitted to 400mm of RU400 and allows for a maximum power rating of 100 Watts. Gain performance mid band is 14.8dBic allowing for narrow ...
MGP-4750N
UHF STL Link Mini Grid-pack, 700-820MHz - 1.2m
The MGP-4750N is a 1.2m all aluminium corrosion resistant UHF STL grid-pack with a N-type Female fitted as standard. With 16.6dBi gain performance, exceptionally broad bandwidth and 100 Watts power rating, this makes the MGP-4750N the ideal STL link between tranmission tower and studio where space is at a premium.
MGP-4850N
UHF STL Link Mini Grid-pack, 820-960MHz - 1.2m
For a broadcast studio to transmission site directional link MGP-4850N UHF STL Grid-pack is the ideal solution where space is at a premium. Being an all aluminium corrosion resistant construction for longevity and standard with a N-type female, 18.5dBi gain mid band and 100 Watts power rating the MGP-4805N is the ZCG ...
MGP-6750N
UHF STL Grid-Pack - 520-820MHz
N-female fitted in base of horn and a maximum power rating of 100 Watts. The maximum gain performance of 22.2dBi mid band. This 1.8m UHF STL Grid Pack requires assembly of the 2-piece design.
MGP-6800N
Mini Gid pack fro 800 MHz
N-female fitted in base of horn and a maximum power rating of 100 Watts. The maximum gain performance of 22.2dBi mid band. This 1.8m UHF STL Grid Pack requires assembly of the 2-piece design. ACMA approved, I.D. number 13459
MGP-6850N
UHF STL Grid-Pack - 820-960MHz
N-female fitted in base of horn and a maximum power rating of 100 Watts. The maximum gain performance of 22.2dBi mid band. This 1.8m UHF STL Grid Pack requires assembly of the 2-piece design. ACMA approved, I.D. number 13459
8234
7/16" DIN male to 7/16" DIN male low PIM adaptor
8235
7/16" DIN male to 7/16" DIN female low PIM adaptor
8235-2
7/16" DIN male to 7/16" DIN female right angle adaptor
8236
7/16" DIN female to 7/16" DIN female low PIM adaptor (tri-metal plated)
7895
BNC female to BNC female bulkhead adaptor (<4mm depth allowance)
7895-2
BNC female to BNC female bulkhead adaptor (75 Ohm) (<4mm depth allowance)
7905
BNC female to BNC female adaptor
7961-2
BNC female to UHF male adaptor
7974-2
N-type male to TNC female adaptor
Nmale to TNC female adaptor
7974-3
N-type male to TNC reverse polarity female adaptor
Nmale to TNC female adaptor
7990
TNC male to mini-UHF female adaptor
7990-2
TNC female to mini-UHF male adaptor
7996
TNC female to TNC female adaptor
8270
BNC male to BNC female right-angle adaptor
8288
BNCto N Female Adaptor
8288-2
BNC Female to N-type female adaptor
8288-3
BNC male to F-type female adaptor
158U-78F
1 5/8" Unflanged to 7/8" Flanged adaptor
The 1 5/8" unflanged adaptor is designed to take rigid line and terminate it into a 7/8 EIA flange.
EIA158-90EL
1-5/8EIA flange elbow (right-angle) swivel adaptor
EIA158F-318F
1-5/8 EIA flange to 3 -1/8 Flange adaptor
EIA158F-78F
1-5/8 EIA flange to 7/8EIA flange adaptor
EIA158F-78FCPL
1-5/8" EIA flange to 7/8" EIA flange silver plated adaptor
EIA158F-NJ
1-5/8 EIA flange to N-type female adaptor
EIA158U-158F
1-5/8" EIA unflanged to 1-5/8" EIA flanged adaptor
EIA158U-78F
1-5/8" EIA Unflanged to 7/8" EIA Flanged Adaptor
EIA318U-78F
3-1/8" EIA unflanged to 7/8" EIA flanged adaptor
EIA618F-NJ
6-1/8" EIA flanged to N-type female adaptor (incl. 6-1/8" EIA bullet)
EIA78F-716F-SC
7/8" EIA flanged to 7/16DIN female adaptor (incl. O-ring/ 7/8 bullet/ bolts)
7/8EIA to 7/16 Din Adaptor. Max power is 2000 watts.
EIA78F-716M
7/8" EIA flanged to 7/16" DIN male adaptor (incl. 7/8" EIA bullet)
EIA78F716MRA
7/8" EIA flanged to 7/16" DIN right-angle male adaptor (incl. 7/8" EIA bullet)
EIA78F-716M-SC
7/8" EIA flange to 7/16" DIN male adaptor (incl. O ring/bullet/bolts)
EIA78F-NJ
7/8EIA flanged to N-type female adaptor
EIA78F-NP
7/8" EIA flanged to N-type male adaptor (incl. 7/8" EIA bullet)
7977
FME male to UHF male PL259 adaptor
7977-2
FME male to TNC male adaptor
7977-4
FME male to mini-UHF male adaptor
8275
FME male to SMA male adaptor
8281
FME female to SMA female adaptor
7944
Right-angle, N-type male to N-type female adaptor
7964
N-type male to UHF female adaptor
7964-2
N-type female to UHF male low PIM adaptor
7974
N-type female to TNC male adaptor
7975
N-male to BNC female adaptor
7975-2
N-type male to SMA female adaptor
7986
N-type female bulkhead to N-type female bulkhead adaptor
N-female bulkhead to N-female bulkhead adaptor
7986-2
N-type female to N-type female bulkhead flange mount adaptor
8228
N-type male to N-type female low PIM adaptor (tri-metal plated)
8229
N-type male to N-type male low PIM adaptor
8230
N-type female to N-type female low PIM adaptor (tri-metal plated)
8231
N-type male to 7/16" DIN female low PIM adaptor
7/16 Female to Male N adaptor, mating cycles>500, IP68,Temp: -40 to +85 c,Insertion loss: 0.15dB
8232
N-type female to 7/16" DIN male low PIM adaptor (tri-metal plated)
8233
N-type male to 7/16" DIN male low PIM adaptor (tri-metal plated)
8246
N-type T adaptor, N-type female inputs/outputs
Connection of two cables into one output, DC to 11 GHz, -40 deg C to +85deg C.,mating cycles >500. IP67,
8247
N-type T adaptor, N-type female outputs, N-type male input
50 Ohm, tee piece, 500 mating Cycles, operating -40 deg C to +85 deg C, DC- 11 GHz
8297-3
N-type female to SMA female adaptor
7905-2
SMA male to BNC female adaptor
8274
Right-Angle SMA male to SMA female adaptor
8280
SMB female to SMB female adaptor
8282
SMB male to SMB male adaptor
8282-2
SMA male to SMA male adaptor
8297
SMA male to N-type female adaptor
8297-2
SMA male to N-type male adaptor
8302
SMA female to reverse SMA male adaptor (reverse rpsma)
8302-2
SMA female to reverse TNC male adaptor
8327
SMA female to TNC male adaptor
8327-2
Reverse gender SMA male and reverse gender TNC female adaptor
7944-1
UHF male to UHF female right-angle adaptor
7946
UHF female to UHF male to UHF female T-adaptor
7959
UHF female to UHF female adaptor
7961
UHF female to BNC male adaptor
7989-2
Mini UHF Male to UHF Female Adaptor
8299
Mini UHF female to SMA female low PIM adaptor (tri-metal plated)
8117
Bag of 100 Stainless Steel cable ties (370mm long x 4.6mm wide)
8117-2
Bag of 100 Stainless Steel cable ties (200mm long x 4.6mm wide)
8117-4
Bag of 100 S/S cable ties, 450mm long x 4.6mm
8117-5
Bag of 100 Stainless Steel cable ties (520mm long x 4.6mm wide)
8117-6
Bag of 100 Stainless Steel cable ties (300mm long x 7.94mm wide)
8117-7
Bag of 100 Stainless Steel cable ties (500mm long x 7.94mm wide)
8117-9
Bag of 100 S/S cable ties, 350mm long x 4.6mm
8528-1
Black PVC cable ties - 100mm long - pack of 100
8529
Black PVC cable ties (200mm long) (Pack of 100)
8530
Black PVC cable ties (300mm long) (Pack of 100)
8485
Black UV stabilised PVC cable gland (5-10mm)
8485-2
Black UV stabilised PVC cable gland (11-17mm)
8485-3
Coax cable cable glands
PVC grey cable glands to suit RG58-RG213 cable
8485-4
Cream PVC cable gland (18-24mm)
8485-5
Black UV stabilised PVC cable gland (7/8" cable)
8485-6
Black UV stabilised Nylon cable gland - 4 to 8mm - waterproof - IP68 - nylon PA66
8485-7
Black UV stabilised Nylon cable gland - 5-10mm - waterproof IP68 - PA66
5591
Nutrile Rubber Grommets
These are not neoprene, and are designed to seal for water ingression. For use with RG58 CoaxialCable, for 9.5mm hole
5591-2
Black nitrile rubber firewall grommet (RG58) - per item
7945
Black rubber strain relief (RG58)
7945-3
Red rubber strain relief (RG59)
ANGLE-AD
Pack 10 S/S angle adapters
HC1250
UPVC single hanger clamp to suit all 1/2" cables
Single support 1/2" coaxial hangers, can be inserted onto M8 threaded rod for single run cables. UPVC for long life. Can be stacked in multiple arrangements. Recommended every 1 mtr.
HC7850
Pack of 10 PVC 7/8" cable hanger clamps (ZCG7850)
HCD1250
UPVC Dual Cable hanger for 1/2" coaxial cable
HCD1250 dual cable clamps suit M8 thread rod , have a single bolt fitting and suit all 1/2" semi ridgid coaxial cables. Come in packs of 10 hangers
HS1250
Hoisting Stocking Grip for 1/2" Flexible or 1/2" Super Flexible Cable
HS1580
Hoisting Stocking Grip for 1-5/8" coax cable
HS7850
Hoisting Stocking Grip for 7/8" Flexible Cable
Hoisting Stocking Grip for 7/8" Flexible Cable, non-magnetic tin coated bronze, single eye, split mesh, lace closing. Pulling coax cable into position has never been easier. Re-useable.
RSB-12
Pack 10 S/S clip style 1/2" cable hanger clamps (ZCG1250)
RSB-310
Pack 10 Metal alloy bolt to tower member cable hanger clamps (22mm thick)
SHC1250
Pack 10 Stainless Steel snap-in cable hangers for 1/2" flexible or 1/2" super flexible cable
SHC7850
Pack 10 Stainless steel snap-in cable hangers for 7/8" flexible cable
Stand-off AD
Kit of 10 S/S stand-off adapters - cable to tube member
8574
Scotch self-bonding amalgamating tape (19mm x 0.76mm x 9.15m)
A-8651
Black PVC electrical insulating tape (19mm x 0.18mm x 20m)
716DINF1250
7/16" DIN female low PIM connector for 1/2" flexible cable (ZCG1250) (tri-metal plated)
716DINF1250SF
7/16" DIN female low PIM Connector for 1/2" super flexible cable (ZCG1250SF) (tri-metal plated)
716DINF7850
7/16" DIN female low PIM connector for 7/8" flexible cable - ZCG7850 - tri-metal plated
716DINM1250
7/16" DIN male low PIM connector for 1/2" flexbile cable (ZCG1250) (tri-metal plated)
716DINM1250SF
7/16" DIN male for 1/2" super flexible cable (ZCG1250SF)
716DINM5850-A
7/16 DIN air connector
7/16 DIN air connector to suit ZCG5850 air cable
716DINM7850
7/16" DIN male low PIM connector for 7/8" flexible cable (ZCG7850) (tri-metal plated)
716DINRAM1250
7/16" DIN right-angle male low PIM connector for 1/2" flexible cable (ZCG1250) (tri-metal plated)
716DINRAM1250SF
7/16" DIN right-angle male low PIM connector for 1/2" superflex cable (ZCG1250SF)
8215
7/16" DIN female flange mount connector (incl. O-ring)
7/16" DIN female flange mount (o-ring), Insertion Loss: 0.08 dB
8215-2
7/16" DIN female flange connector for RG142
7915-4
75 Ohm N-type female bulkhead
75 Ohm N female bulkhead screw mount, no nut,
7962-2
75 Ohm BNC female flange mount connector
7962-3
75 Ohm BNC female bulkhead mount
7978-2
75 Ohm BNC male connector for RG59
7978-3
75 Ohm BNC crimp male connector for RG11
7978-4
75 Ohm BNC crimp male connector for RG58
8261
75 Ohm N-type female crimp connector for RG59
8262
75 Ohm N-type female crimp connector for RG59/RG6
8263
75 Ohm N-type female crimp connector for RG11
8266
75 Ohm N-type male clamp connector for RU400-75
8267
75 Ohm BNC male clamp connector for RU400-75
8289-1
75 Ohm F-type male crimp connector for RG59/RG6
7892
BNC female crimp connector (jack) for RG58
7902
Reverse gender TNC connector
Data connector with reverse gender pin in male body.
7902-3
Reverse gender TNC connector
Data connector with reverse gender pin in male body.
7907-2
TNC female bulkhead connector for RG58
7920
BNC male solder clamp connector (plug) for RG58
7921-2
BNC female crimp connector (jack) for RG58
7921-3
BNC right-angle male crimp connector (plug) for RG59
7921-4
BNC female solder connector (jack) for RG402
7922
TNC, crimp pin clamp connector
TNC Clamp connector to suit, RG58, RG55, RG142, RG223. 500 mating cycles, HSF compliant. IP67 compliant.
7929
BNC female bulkhead mount connector (incl. solder tag)
7930-5
TNC male crimp connector (plug) for RU400/RG8/LMR400
7936
BNC male clamp connector (plug) for RG213
BNC Male Clamp connector for RG213 cable. >500 mating cycles, -40 deg to +85 deg
7936-2
BNC male clamp connector (plug) for RU400
7936-5
RG142 BNC Male crimp connector
Crimp connector for RG142 cable .
7943
TNC male solder pin crimp connector for RG58
7943-2
TNC male crimp connector (plug) for RG58
7943-3
Black TNC male crimp connector (plug) for RG58
7943-4
TNC male crimp connector (plug) for RG58
7951
BNC female bulkhead mount connector for RG174/ RG316
7962
BNC female flange mount connector (receptacle)
7962-4
BNC female square flange mount connector
7965
BNC Male connectors, Crimp style
Crimp sleeve and pin, the pin can be soldered as well. Tri Metal Plated. Crimp ferrule: Hex crimp 0.213". Crimp Pin: 0.68".
7967
TNC female crimp connector (jack) for RG58
7999
BNC male solder clamp connector (plug) for RG58
8206
TNC male crimp connector (plug) for RG58 (sucoplated)
8207
TNC female bulkhead connector (jack) (sucoplated)
8224
TNC male crimp connector (plug) for RG174/RG316
8238
TNC female solder pin crimp connector for RU400
8265
BNC male right-angle clamp connector (plug) for RG174/RG316
8269
BNC male solder pin clamp connector (plug) for RG174/RG316
7966
AM-FM Car radio Plug
Solderless Male plug for AM/FM car radio's. easy fit. Normally called a Motorola plug.
7966-2
Male solderless car radio connector (plug) inner for RG58 (no shell)
158EIA15850
1 5/8" EIA Connector
1 5/8" EIA conncotr to suit 1 5/8" low loss foam cable. Mating cycles: greater than 500, Peak power 90 kWatts. IP 67 weatherproof rate.
158EIA15850-A
1 5/8" EIA connector for Air dielectric coaxial cable
The 1 5/8" EIA air connector is either air pass or air stop, and is designed to fit onto air dielectric 1 5/8" coaxial cable.
1680
Silver plated joining bullet for 7/8" EIA connector
318EIA15850
3 1/8" EIA Connector
3 1/8" EIA connector to suit 1 5/8" foam cable. +500 Mating cylces, Max peak power 120kW.
78EIA1250
7/8" EIA flange connector for 1/2" foam dielectric of radiating cable (ZCG1250)
78EIA1250-SC
7/8" EIA flange connector for 1/2" foam dielectric cable (ZCG1250) (solder pin)
78EIA1250SF
7/8" EIA flange connector for 1/2" super flexible foam dielectric cable (ZCG1250SF)
78EIA7850
7/8" EIA flange connector for 7/8" flexible foam dielectric cable (ZCG7850)
78EIA7850-A
7/8" EIA flange connector for 7/8" air dielectric for air radiating cable
EIA158 BULLET
1 5/8" flanged joining bullet
This bullet is designed to fitting into any 1 5/8EIA connector
8301
Fakra SMA crimp connector, for RG58LL, bordeaux violet - cellular
8301-10
Fakra N-type crimp jack, pastel green suits RG174A/U
8301-2
Fakra SMB, straight plug crimp, with clip (SM76) for RG58 L/L cable, violet clipcolour. 4004
8301-3
Fakra Blue, SMB Straight Female Crimp for RG58 Code C
8301-5
Fakra white, SMB straight female crimp, suits RG58 - Code B
8301-6
Fakra curry yellow, SMB straight female crimp, suits RG58 - Code K Code K
8301-7
Fakra blue, SMB straight male crimp, suits RG58 - Code C
8301-8
Fakra beige, SMB male crimp, suits RG58 - Code I
8301-9
Fakra curry yellow, SMB straight male crimp, suits RG58 - Code K
7906
FME male crimp connector (plug) for RG58
7976
FME female crimp connector/jack, for RG58
7976-2
FME female right-angle crimp connector (jack) for RG58
8273
FME female solder pin crimp connector (jack) for RG174/RG316
8242
MMCX Right angle male connector
7913
N-type male solder clamp low PIM connector (plug) for RG213
7914
N-type female flange mount receptacle
7914-2
N-type female flange mount low PIM receptacle
7915
N-type female SHM receptacle (jack)
7915-2
N-type female bulkhead receptacle - no nut/washer
7916
N-type female solder pin clamp connector -jack - for RG213
7917
N-type male solder pin clamp connector (plug) for RG58
7917-2
N-type male clamp connector (plug) - black for RG58 stranded
7918
N-type female solder pin clamp connector (jack) for RG58
7923
N-type female crimp connector (jack) for RG59 (tri-metal plated)
7923-2
N-type female solder pin clamp connector (jack) for RG59
7923-3
N-type male crimp connector (plug) for RG59
7930
N-type male solder pin clamp connector (plug) for RU400/RG8
7930-2
N-type female solder pin clamp connector (jack) for RU400/RG8
7930-4
N-type male solderless clamp connector (plug) for RU400/RG8
7932-3
N-type female bulkhead mount crimp connector for RG214
7932-4
N-type male right-angle crimp low PIM connector (plug) for RG214
7933-3
N-type male crimp connector (plug) for RG58 (nickel plated)
N male crimp Plug, Nickel Plated, for general communications. 500 mating cycles
7937
N-Type Male Low PIM Tri-metal Plate Crimp Connector - Suits RG213
7937-2
N-type male low PIM crimp connector (plug) for RG214 (tri-metal plated)
7938
N-type female low PIM crimp connector (jack) for RG58 (tri-metal plated) - crimp pin
7939
N-female low PIM crimp connector (jack) (RG213) (tri-metal plated)
7939-2
Nickel plated N female crimp connector
Crimp connector for RG213 coaxial cable, Nickel plated
7984
N-type female cap and chain
7997
N-type female flange mount solder pin clamp connector (jack) for RG58
7998
N-type female bulkhead crimp connector (jack) for RG58
8200
N-type male crimp connector (plug) for RG142 (tri metal plated)
8201
N-type male right-angle low PIM crimp connector (plug) for RG142 (tri-metal plated)
8219
N-type male right-angle low PIM clamp connector (plug) for RG58 (tri-metal plated)
8226
N-type male male low PIM crimp connector plug for RU400/RG8 (tri-metal plated)
8227
N-type female low PIM crimp connector (jack) for RU400/RG8 (tri-metal plated)
8237
N-type male right-angle low PIM clamp connector (plug) for 1/2" flexible cable (ZCG1250) (tri-metal plated)
8255
N-type male clamp connector (plug) for 1-1/4" corrugated cable (connector glue required)
8278
N-type male crimp connector (plug) for RG174/RG316
8278-2
N-type female bulkhead connector (jack) for RG174/RG316
8278-3
N-type female crimp connector (jack) for RG174/RG316
8283
N-type male low PIM crimp connector (plug) for RG223/RG142 (tri-metal plated)
8286
N-type male right-angle low PIM solder pin crimp connector (plug) for RU400/ RG8 (tri-metal plated)
NF1250
N-type female low PIM Connector (jack) for 1/2" cable (ZCG1250) (tri-metal plated)
N Female connector to suit 1/2" foam coaxial cable.
NF1250SF
N-type female low PIM connector (jack) to suit 1/2" super flexible cable (ZCG1250SF)
NF7850
N Female connector for 7/8th foam Coaxial cable
Low pim, N female connector to suit 7/8th foam flexible coaxial cable.
NM1250
N-type male low PIM connector for 1/2" flexible cable (ZCG1250) (tri-metal plated)
N male plug to suit 1/2 foam coaxial cable. Tri Metal Plated, 500 mating cycles. IP67,
NM1250SF
N-type male low PIM connector (plug) for 1/2" super flexible cable (ZCG1250SF) (tri-metal plated)
NM7850
N-type male low PIM connector (plug) for 7/8" flexible cable (ZCG7850) (tri-metal plated)
7963-10
SMA reverse gender male solder pin crimp connector (plug) for RG174/RG316
7963-4
SMA reverse gender male solder pin crimp connector (plug) for RG58
7988
BNC reverse gender male crimp connector (plug) for RG58
8239
TNC reverse gender male solder pin crimp connector (plug) for RU400
TNC Male reverse gender crimp plug, 50 ohm, mating cycles>500, temp: -40 to +85 C, plating Ni,
8268
SMA reverse gender female crimp connector (jack) for RG58
8304
SMC gold plated reverse gender male crimp connector (plug) for RG174/RG316
8304-2
SMC reverse gender female crimp connector (jack) for RG174/RG316
SMCFemale, connectors are designed originally with female body and male contact pin, 50 ohm reverse gender
7901
SMA male crimp connector (plug) for RG174/RG316
7901-2
SMA female gold plated bulkhead connector (jack) for RG174/ RG316
7901-3
SMA gold plated male crimp connector (plug) for RG174/RG316
7901-4
SMA gold plated female crimp connector (jack) for RG178
7950
SMA gold plated female solder panel mount connector (jack)
7963-13
Reverse Gender SMA right angle male for RG316
Right angled, SMA Connector, Male crimp. to suit RG316 coaxial cable.
7963-14
Right angle SMA male connector
Right angled, SMA Connector, Male crimp. to suit RG174 coaxial cable, nickel plated.
7963-2
SMA nickel plated female solder pin crimp connector (jack) for RG58
7963-7
SMA gold plated male solder pin crimp connector (plug) for RG58/RG223
7963-8
Right angle SMA male connector
Right angled, SMA Connector, Male crimp. to suit RG174 coaxial cable, nickel plated.
8204
SMA sucoplated male crimp connector (plug) for RG142
8225
SMA nickel plated male clamp crimp connector (plug) for RG178
8279
SMB gold plated male crimp connector (plug) for RG174/RG316
8279-2
SMB gold plated female crimp connector (plug) for RG174/RG316
8279-3
SMB right angle male crimp connector for RG179 - 75 Ohm
7900
UHF male PL259 solder connector.
Nickle plated brass with a life of 500 + mating cyles.For use in all CB radio's marine Radios and various Transmitters. From Dc to 300 MHz. We recommend N type male connectors for higher frequencies.
7904
UHF male PL259 solder plug for RG213
7908
UHF male solder pin clamp connector (plug) for RG213/ RG214/ RU400/ RG8 and RG1
7908-2
Black Chrome PL259 for RG58 Clamp style.
7909
UHF male solder pin clamp connector (plug) for RG58
7910
UHF male solder pin crimp connector (plug) for RG213/ RU400
7911
UHF female SHM receptacle (jack)
UHF Female Bulk head with nut, mating cycles: 500, plating Ni, Temp range: -40 to +85 c.
7911-2
UHF female bulkhead mount connector (jack)
7912
UHF female clamp connector (jack) for RG213
7934
SO259 clamp style UHF connector
This is a high quality SO259 clamp connector to suit RG58 coaxial cable.
7934-3
SO239 clamp style UHF female connector
This is a high quality SO239 crimp connector to suit RG58 coaxial cable.
7934-4
SO259 clamp style Bulk head UHF connector
This is a high quality SO259 clamp connector to suit RG213 and is bulhead mounted
7941
Mini UHF female flange panel mount connector (jack)
7941-1
Mini UHF female crimp connector (jack) for RG58
7941-2
Mini UHF male crimp connector (plug) for RG58
7941-3
Mini clamp connector for RG59
Male Mini UHF connector for 75ohm cable
7942
UHF male crimp connector (plug) for RG58
7942-2
UHF male solder pin crimp connector (plug) for RG58
7994
UHF right-angle solder pin female connector (jack) (stud mount with 17mm hole)
GK1250
Ground earthing kit for 1/2" flexible cable (ZCG1250)
GK1250SF
Ground earthing kit for 1/2" super flexible cable (ZCG1250SF)
GK1580
Ground earthing kit for 1-5/8" flexible cable (ZCG1580)
GK7850
Ground earthing kit for 7/8" flexible cable - ZCG7850
GK950
Ground earthing kit (RU400/ RG213/ RG214/RG8)
7800-100
RG213 50 Ohm MIL-SPEC coaxial cable - 100m roll
RG213 is a common everyday cable useful for both VHF and UHFapplications.
7800-300
RG213 50 Ohm MIL-SPEC coaxial cable - 300 metre roll
RG213 is a common everyday cable useful for both VHF and UHF applications.
7803-100
RG58A/U 50 Ohm MIL-SPEC stranded coaxial cable - 100m Roll
RG58A/U stranded MIL SPEC, 50 Ohm coaxial cable is suitable for low power applications in the lower frequency range, such as UHF CB 477MHz communications.
7803-300
RG58A/U 50 Ohm MIL-SPEC stranded coaxial cable - 300m Roll
RG58A/U stranded MIL SPEC, 50 Ohm coaxial cable is suitable for low power applications in the lower frequency range, such as UHF CB 477MHz communications.
7803-300W
RG58A/U 50 Ohm white coaxial stranded cable - 300m Roll
RG58A/U stranded MIL SPEC, 50 Ohm coaxial cable is suitable for low power applications in the lower frequency range, such as UHF CB 477MHz communications.
7807-100
RG59 B/U 75 Ohm MIL-SPEC coaxial cable - 100m roll
RG59B/U is a common everyday use MIL SPEC coaxial cable for 75 Ohm applications, particularly television.
7807-500
RG59 B/U 75 Ohm MIL-SPEC coaxial cable - 500m roll
RG59B/U is a common everyday use MIL SPEC coaxial cable for 75 Ohm applications, particularly television.
7808-100
RG214/U 50 Ohm double shielded coaxial cable - 100m roll
Our RF MAX brand of double shielded, 50 Ohm RG214/U coaxial cable offers equivalent construction and performance to other brands available.
7808-300
RG214/U 50 Ohm double shielded coaxial cable - 300m roll
Our RF MAX brand of double shielded, 50 Ohm RG214/U coaxial cable offers equivalent construction and performance to other brands available.
7823-200
RG142B/U 50 Ohm (solid core) coaxial cable (O.D: 4.95mm) - 200m roll
RG142 miniature 50 Ohm coaxial cable has a silver plated, copper clad steel centre conductor with a teflon dielectric.
7839-100
RG58L/L 50 Ohm MIL-SPEC low loss solid core coaxial cable - 100m roll
RG58 low loss solid core MIL SPEC, 50 Ohm coaxial cable is particularly useful for applications such as cellular antenna installations.
7839-300
RG58L/L 50 Ohm MIL-SPEC low loss solid coaxial core cable - 300m roll
RG58 low loss solid core MIL SPEC, 50 Ohm coaxial cable is particularly useful for applications such as cellular antenna installations.
7839W-300
RG58L/L 50 Ohm MIL SPEC white low loss solid core coaxial cable - 300m roll
RG58 low loss solid core MIL SPEC, 50 Ohm coaxial cable is particularly useful for applications such as cellular antenna installations.
7853-100
RG316 50 Ohm miniature coaxial cable (O.D: 2.5mm) - 100m roll
RG316 miniature 50 Ohm, coaxial cable has a silver plated, copper clad, steel centre wire conductor with a teflon dielectric.
7853-200
RG316 200 mtr roll minature cable
RG316 miniature 50 Ohm, coaxial cable has a silver plated, copper clad, steel centre wire conductor with a teflon dielectric.
7877-500
RG174A/U 50 Ohm MIL-SPEC miniature coaxial cable - 500m roll
RG174A/U is a miniature MIL Spec, 50 Ohm coaxial cable useful for frequencies up to 1GHz.
7890-100
RU400 50 Ohm low loss coaxial cable - 100m roll
For those longer cable runs or the higher frequency range, this 50 Ohm RU400 cable will provide the low attenuation performance you require.
7890-300
RU400 50 Ohm low loss coaxial cable - 300m roll
For those longer cable runs or the higher frequency range, this 50 Ohm RU400 cable will provide the low attenuation performance you require.
8121-300
RU400-75 75 Ohm low loss coaxial cable - 300m Roll
RU400-75 is a high quality, 75 Ohm coaxial cable which delivers excellent low attenuation performance. This cable is therefore ideally suited for those longer cable runs or the higher frequency range.
ZCG1250
1/2" 50 Ohm flexible foam dielectric coaxial cable - per metre
Our 1/2" flexible foam dielectric, 50 Ohm coaxial cable has specifications and attenuation performance to match or surpass all other brands.
ZCG1250LF-500
1/2" leaky feeder coaxial cable, 50 Ohm (specify frequency) - 500m roll
ZCG1250LF-LSZH-500
1/2" 50 Ohm low smoke zero halogen leaky feeder coaxial cable (specify frequency) - 500m roll
ZCG1250-LSZH
1/2" 50 Ohm low-smoke zero halogen flexible foam dielectric coaxial cable - per metre
Our 1/2" low smoke flexible foam dielectric, 50 Ohm coaxial cable has specifications and attenuation performance to match or surpass all other brands.
ZCG1250SF
1/2" 50 Ohms super flexible foam dielectric coaxial cable - per metre
The Specifi cations and attenuation performance of our 1/2" super flexible, foam dielectric, 50 Ohm coaxial cable are comparable with any other brand available.
ZCG1450SF
1/4" 50 Ohm super flexible foam dielectric coaxial cable - per metre
1/4 " superflexible coaxial cable .
ZCG1580
1-5/8" 50 Ohm flexible foam dielectric coaxial cable - per metre
RF MAX 1-5/8" foam flexible dielectric, 50 Ohm coaxial cable has specifications and attenuation performance to match or surpass all other brands on the market.
ZCG7850
7/8" 50 Ohm flexible foam dielectric coaxial cable - per metre
Our 7/8" foam flexible dielectric, 50 Ohm coaxial cable has specifications and attenuation performance to match or surpass all other brands on the market.
CA015-S-N-LTSM-FM-E16
Cable assembly 150mm RG174, large TS-9 male and FME Male fitted
CA020-S-N-NM-MCXMRA-E16
Cable assembly 200mm RG174, N-male and MCX right-angle male fitted
CA040-S-N-NM-RPSMA-E16
Cable assembly 400mm RG174, N-male and Reverse polarity SMA right angle male fitted
CA050-S-N-STSM-FM-E16
Cable assembly 500mm RG174, small TS-9 male and FME Male fitted
CA030-S-N-NF-BM-E3
Cable assembly 300mm RG213, N-female and BNC male fitted
CA102-S-N-NM-NM-E3
Cable assembly 2 mtr
2.0 mtr Rg213 cable assembly with N male connectors fitted both ends.
CA107-S-N-NM-NM-E3
Cable assembly 7m RG213, N-male fitted both ends
CA110-S-N-NM-NF-E3
Cable assembly 10m RG213, N-male and N-female fitted
CA110-S-N-NM-NM-E3
Cable assembly 10m RG213, N-male fitted both ends
CA130-S-N-NM-NM-E3
Cable assembly 30m RG213, N-male fitted both ends
CA101-S-N-UM-UM-E7
Cable assembly 1m RU400, UHF male fitted both ends
CA101.5-S-N-NM-TM-E17
Cable assembly 1.5m RG223 , N-male and TNC Male fitted
CA110-S-N-NM-SM-E17
Cable assembly 10m RG223LL, N-male and SMA male fitted
CA001.05-S-N-NFBH-RSM-E6
Cable assembly 105mm RG316, NF bulkhead and right angle SMA Male fitted
CA002.3-S-N-BRF-NFBH-E6
Cable assembly 230mm RG316, N-female bulkhead and BNC right-angle male fitted
CA002.3-S-N-SM-NFBH-E6
Cable assembly 230mm RG316, N-female bulkhead and SMA male fitted
CA002-S-N-SMFBH-RAFUFL-E6
F.UFL to SMAFBH cable assembly
200mm RG316 cable assembly. with IPX/U.fl RA to SMAF Bulkhead connectors.
CA002-S-N-SM-RAFUFL-E9
F.UFL to SMAS cable assembly
200mm RG316 cable assembly.
CA007-S-N-SF-SBM-E6
Cable assembly 70mm RG316, SMA female and SMB male fitted
CA029-S-N-BF-RSM-E6
Cable assembly 293mm RG316, N-female bulkhead and right angle SMA Male fitted
CA080-S-N-NM-SM-E6
Cable assembly 800mm RG316, N-male and SMA male fitted
CA101-S-N-SM-SM-E6
Cable assembly 1m RG316, SMA male fitted both ends
CA020-S-N-SM-BF-E01
Cable assembly 250mm RG58, SMA male and BNC female fitted
CA025-S-N-NM-SM-E1
Cable assembly 250mm RG58, N-male and SMA female fitted
CA030-S-N-RAU-NF-E1
Cable assembly 300mm RG58, UHF right-angle male and N-female fitted
CA030-S-N-SF-NM-E1
Cable assembly 300mm RG58, SMA female and N-male fitted
CA050-S-N-SF-FKB-E15
Cable assembly 500mm RG58, SMA female and blue Fakra fitted
CA050-S-N-SF-NM-E1
Cable assembly 500mm RG58, SMA female and N-male fitted
CA101.4-S-N-TM-NM-E1
Cable assembly 1.4m RG58, TNC-male and N-male fitted
CA101.5-S-N-SM-NM-E1
Cable assembly 1.5m RG58, N-male and SMA male fitted
CA101.5-S-N-SM-SM-E1
Cable assembly 1.5m RG58 stranded, SMA males fitted
CA101.5-S-N-TM-NM-E15
Cable assembly 1.5m RG58, TNC-male and N-male fitted
CA102-S-N-TM-NM-E1
Cable assembly 2m RG58 stranded, TNC-male and N-male fitted
CA105-S-N-SM-SM-E1
Rg58 Cable assy
5 mts RG58 stranded coaxial cable fitted with SMA male connectors either end. Ideal cable tail for vehicle mount antennas.
CA030-S-N-NM-FF-E15
Cable assembly 300mm RG58LL, N-male and FME female fitted
CA050-S-N-NF-TM-E15
Cable assembly 500mm RG58LL, TNC male and N-female fitted
CA100.1-S-N-NM-SMARP-E15
100 mm N Male to SMA Reverse Polarity cable Assy
This 100 mm cable assembly allows connection from N female caonnector to most mosems with a SMA female reverse polarity connector, Ideal for Mobile phone modems and other date equipment interface.
CA101-S-N-NM-UM-E15
Cable assembly 1m, RG58LL, N-male and UHF male fitted
CA102-S-N-NM-SM-E15
Cable assembly 2m RG58LL, N-male and SMA male fitted.
CA102-S-N-NM-TM-E15
Cable assembly 2m RG58LL, N-male and TNC male fitted.
CA103-S-N-SM-E15
Cable assembly 3m RG58LL, SMA male fitted one end only
CA108-S-N-NM-SM-E15
Cable assembly 8m RG58LL, N-male and SMA male fitted
CA110-S-N-NM-FF-E15
Cable assembly 10m RG58LL, N-male and FME female fitted
CA110-S-N-SM-NM-E15
Cable assembly 10m RG58LL, SMA male and N-male fitted
CA135-S-N-TM-TM-E15
Cable assembly 35m RG58LL, TNC males fitted
CA050-S-N-UM-BM-E07
Cable assembly 500mm RU400, UHF male and BNC male fitted
CA070-S-N-NM-NM-E7
Cable assembly 700mm RU400, N-male fitted both ends
CA102-S-N-NMC-NMC-E7
Cable assembly 2m RU400, N-male fitted both ends
CA103-S-N-NM-NF-E7
Cable assembly 3m RU400 ,N-male and N-female fitted
CA104.5-S-N-NM-TM-E07
Cable assembly 4.5m RU400, N-male and TNC male fitted
CA104.68-S-N-NM-NM-E7
Cable assembly 4.68m RU400, N-male fitted both ends
CA104-S-N-NM-NM-E7
Cable assembly 4m RU400, N-male fitted both ends
CA105-S-N-NM-NF-E7
Cable assembly 5m RU400, N-male and N-female fitted
CA105-S-N-NM-TM-E07
Cable assembly 5m RU400, N-male and TNC male fitted
CA105-S-N-NM-TRG-E07
Cable assembly 5m RU400, N-male and TNC male (reverse) fitted
CA108-S-N-NM-NM-E07
Cable assembly 8m RU400, N-type male fitted either end
CA108-S-N-TM-TM-E07
Cable assembly 8m RU400, TNC male fitted both ends
CA110-S-N-NM-NM-E7
Cable assembly 10m RU400, N-male fitted both ends
CA115-S-N-NM-NF-E7
Cable assembly 15m RU400, N-male and N-female fitted
CA115-S-N-NM-NM-E7
Cable assembly 15m RU400, N-male fitted both ends
CA101.2-S-N-DM-NM-E11
Cable assembly 1.2m ZCG1250, 7/16" DIN male and N-Male fitted
CA102.5-S-N-78-78-E11
Cable assembly 2.5m ZCG1250, 7/8" EIA fitted both ends
CA102-S-N-DM-NM-E11
Cable assembly 2m ZCG1250, 7/16" DIN male and N-Male fitted
CA103-S-N-NM-NM-E11
Cable assembly 3m ZCG1250, N-male fitted both ends
CA104-S-N-DM-DM-E11
Cable assembly 4m ZCG1250, 7/16" DIN male fitted both ends
CA110-S-N-NM-NM-E11
Cable assembly 10m ZCG1250, N-male and N-male fitted
CA117-S-N-NM-NM-E11
Cable assembly 17m ZCG1250, N-male fitted both ends
CA120-S-N-NM-NM-E11
Cable assembly 20m ZCG1250, N-male fitted both ends
CA104-S-N-DM-DM-E13
Cable Assembly 4mtrs
4 Mtrs ZCG1250SF low loss branch feeder, for interconnection on antenna arrays. Sper Flexible coaxial cable 1/2".
CA101-S-N-78-78-E12
Cable assembly 1m ZCG7850, 7/8EIA fitted both ends
CA101-S-N-78-E12
Cable assembly 1m ZCG7850, 7/8EIA7850 fitted on one end
CA103-S-N-158-158-E12
Cable assembly 3m ZCG7850, 158EIA at both ends
CA103-S-N-158-DM-E12
Cable assembly 3m ZCG7850, 158EIA and 716DIN male fitted
CA123-S-N-NF-NF-E12
Cable assembly 23m ZCG7850, N-female fitted both ends
CA160-S-N-NM-NM-E12
Cable assembly 60m ZCG7850, N-male fitted both ends
ZVBF-136AB
Airband single cavity filter, 118-136MHz, specify 200kHz, 250W - gold anodised
The ZVBF-136AB single cavity band pass filter will work within the Air band 118-136MHz frequency range, suitable for airport communications.The band-pass filter is ideal for recieve isolation. ZCG proudly manufacture their cavity band-pass filters in Australia for improved availability and customisation.
FDB-10000S
FM radio star point dual-combiner, 87.5-108.5MHz, 2.5MHz spacing, 2 x 5kW
The FDB-10000S is a FM star point dual-combiner, allowing 2 x frequencies within the FM band to be combined into one antenna. Attenuation figures of <0.2dB and isolation figures of 35dB typical. Available in either dual, tri or quad combiner configurations. Versions with 1.5MHz channel spacings are also available.
FDB-2000S
FM radio star point dual-combiner, 87.5-108.5MHz, 2.5MHz spacing, 2 x 500W
The FDB-2000S is a FM star point dual-combiner, allowing 2 x frequencies within the FM band to be combined into one antenna. Attenuation figures of <0.5dB and isolation figures of 35dB typical. Available in either dual, tri or quad combiner configurations. Versions with 1.5MHz channel spacings are also available.
FDB-2000S-H
FM radio star point dual-combiner, 87.5-108.5MHz, 2.5MHz spacing, 2 x 1kW
The FDB-2000S-H is a FM star point dual-combiner, allowing 2 x frequencies within the FM band to be combined into one antenna. Attenuation figures of <0.5dB and isolation figures of 35dB typical. Available in either dual, tri or quad combiner configurations. Versions with 1.5MHz channel spacings are also available.
FDB-201S
FM radio star point dual-combiner, 87.5-108.5MHz, 2.5MHz spacing, 2 x 100W
The FDB-201S is a FM star point dual-combiner, allowing 2 x frequencies within the FM band to be combined into one antenna. Attenuation figures of <0.4dB and isolation figures of 35dB typical. Available in either dual, tri or quad combiner configurations. Versions with 1.5MHz channel spacings are also available.
FDB-4000S
FM radio star point dual-combiner, 87.5-108.5MHz, 2.5MHz spacing, 2 x 2kW
The FDB-4000S is a FM star point dual-combiner, allowing 2 x frequencies within the FM band to be combined into one antenna. Attenuation figures of <0.3dB and isolation figures of 35dB typical. Available in either dual, tri or quad combiner configurations.. Versions with 1.5MHz channel spacings are also available.
FDB-402S
FM radio star point dual-combiner, 87.5-108.5MHz, 2.5MHz spacing, 2 x 200W
The FDB-402S is a FM star point dual-combiner, allowing 2 x frequencies within the FM band to be combined into one antenna. Attenuation figures of <0.5dB and isolation figures of 35dB typical. Available in either dual, tri or quad combiner configurations. Versions with 1.5MHz channel spacings are also available.
FDB-6000S
FM radio star point dual-combiner, 87.5-108.5MHz, 2.5MHz spacing, 2 x 3kW
The FDB-6000S is a FM star point dual-combiner, allowing 2 x frequencies within the FM band to be combined into one antenna. Attenuation figures of <0.3dB and isolation figures of 35dB typical. Available in either dual, tri or quad combiner configurations.. Versions with 1.5MHz channel spacings are also available.
FDT-10000S
FM radio star point dual-combiner, 87.5-108.5MHz, 1.5MHz spacing, 2 x 5kW
The FDT-10000S is a FM star point dual-combiner, allowing 2 x frequencies within the FM band to be combined into one antenna. Attenuation figures of <0.5dB and isolation figures of 35dB typical. Available in either dual, tri or quad combiner configurations. Versions with 2.5MHz channel spacings are also available.
FDT-2000S
FM radio star point dual-combiner, 87.5-108.5MHz, 1.5MHz spacing, 2 x 800W
The FDT-2000S is a FM star point dual-combiner, allowing 2 x frequencies within the FM band to be combined into one antenna. Attenuation figures of <0.6dB and isolation figures of 35dB typical. Available in either dual, tri or quad combiner configurations. Versions with 2.5MHz channel spacings are also available.
FDT-2000S-H
FM radio star point dual-combiner, 87.5-108.5MHz, 1.5MHz spacing, 2 x 1.2kW
The FDT-2000S-H is a FM star point dual-combiner, allowing 2 x frequencies within the FM band to be combined into one antenna. Attenuation figures of <0.6dB and isolation figures of 35dB typical. Available in either dual, tri or quad combiner configurations. Versions with 2.5MHz channel spacings are also available.
FDT-4000S
FM radio star point dual-combiner, 87.5-108.5MHz, 1.5MHz spacing, 2 x 2kW
The FDT-4000S is a FM star point dual-combiner, allowing 2 x frequencies within the FM band to be combined into one antenna. Attenuation figures of <0.5dB and isolation figures of 35dB typical. Available in either dual, tri or quad combiner configurations. Versions with 2.5MHz channel spacings are also available.
FDT-403S
FM radio star point dual-combiner, 87.5-108.5MHz, 1.5MHz spacing, 2 x 200W
The FDT-403S is a FM star point dual-combiner, allowing 2 x frequencies within the FM band to be combined into one antenna. Attenuation figures of <0.8dB and isolation figures of 35dB typical. Available in either dual, tri or quad combiner configurations. Versions with 2.5MHz channel spacings are also available.
FDT-6000S
FM radio star point dual-combiner, 87.5-108.5MHz, 1.5MHz spacing, 2 x 3kW
The FDT-6000S is a FM star point dual-combiner, allowing 2 x frequencies within the FM band to be combined into one antenna. Attenuation figures of <0.5dB and isolation figures of 35dB typical. Available in either dual, tri or quad combiner configurations. Versions with 2.5MHz channel spacings are also available.
FQB-4000S
FM radio star point quad-combiner, 87.5-108.5MHz, 2.5MHz spacing, 4 x 500W
The FQB-4000S is a FM star point quad-combiner, allowing 4 x frequencies within the FM band to be combined into one antenna. Attenuation figures of <0.6dB and isolation figures of 35dB typical. Available in either dual, triple or quad combiner configurations. Versions with 1.5MHz channel spacings are also available.
FQB-8000S
FM radio star point quad-combiner, 87.5-108.5MHz, 2.5MHz spacing, 4 x 2kW
The FQB-8000S is a FM star point quad-combiner, allowing 4 x frequencies within the FM band to be combined into one antenna. Attenuation figures of <0.4dB and isolation figures of 35dB typical. Available in either dual, triple or quad combiner configurations. Versions with 1.5MHz channel spacings are also available.
FQB-802S
FM radio star point quad-combiner, 87.5-108.5MHz, 2.5MHz spacing, 4 x 300W
The FQB-802S is a FM star point quad-combiner, allowing 4 x frequencies within the FM band to be combined into one antenna. Attenuation figures of <0.5dB and isolation figures of 35dB typical. Available in either dual, triple or quad combiner configurations. Versions with 1.5MHz channel spacings are also available.
FQT-4000S
FM radio star point quad-combiner, 87.5-108.5MHz, 1.5MHz spacing, 4 x 500W
The FQT-4000S is a FM star point quad-combiner, allowing 4 x frequencies within the FM band to be combined into one antenna. Attenuation figures of <0.6dB and isolation figures of 35dB typical. Available in either dual, tri or quad combiner configurations. Versions with 2.5MHz channel spacings are also available.
FQT-4000S-H
FM radio star point quad-combiner, 87.5-108.5MHz, 1.5MHz spacing, 4 x 1kW
The FQT-4000S-H is a FM star point quad-combiner, allowing 4 x frequencies within the FM band to be combined into one antenna. Attenuation figures of <0.6dB and isolation figures of 35dB typical. Available in either dual, tri or quad combiner configurations. Versions with 2.5MHz channel spacings are also available.
FQT-8000S
FM radio star point quad-combiner, 87.5-108.5MHz, 1.5MHz spacing, 4 x 2kW
The FQT-8000S is a FM star point quad-combiner, allowing 4 x frequencies within the FM band to be combined into one antenna. Attenuation figures of <0.5dB and isolation figures of 35dB typical. Available in either dual, tri or quad combiner configurations. Versions with 2.5MHz channel spacings are also available.
FTB-15000S
FM radio star point tri-combiner, 87.5-108.5MHz, 2.5MHz spacing, 3 x 5kW
The FTT-15000S is a FM star point tri-combiner, allowing 3 x frequencies within the FM band to be combined into one antenna. Attenuation figures of <0.2dB and isolation figures of 35dB typical. Available in either dual, triple or quad combiner configurations. Versions with 1.5MHz channel spacings are also available.
FTB-3000S
FM radio star point tri-combiner, 87.5-108.5MHz, 2.5MHz spacing 3 x 500W
The FTT-3000S is a FM star point tri-combiner, allowing 3 x frequencies within the FM band to be combined into one antenna. Attenuation figures of <0.5dB and isolation figures of 35dB typical. Available in either dual, triple or quad combiner configurations. Versions with 1.5MHz channel spacings are also available.
FTB-3000S-H
FM radio star point tri-combiner, 87.5-108.5MHz, 2.5MHz spacing, 3 x 800W
The FTT-3000S-H is a FM star point tri-combiner, allowing 3 x frequencies within the FM band to be combined into one antenna. Attenuation figures of <0.5dB and isolation figures of 35dB typical. Available in either dual, triple or quad combiner configurations. Versions with 1.5MHz channel spacings are also available.
FTB-6000S
FM radio star point tri-combiner, 87.5-108.5MHz, 2.5MHz spacing, 3 x 2kW
The FTT-6000S is a FM star point tri-combiner, allowing 3 x frequencies within the FM band to be combined into one antenna. Attenuation figures of <0.4dB and isolation figures of 35dB typical. Available in either dual, triple or quad combiner configurations. Versions with 1.5MHz channel spacings are also available.
FTB-602S
FM radio star point tri-combiner, 87.5-108.5MHz, 2.5MHz spacing, 3 x 200W
The FTB-602S is a FM star point tri-combiner, allowing 3 x frequencies within the FM band to be combined into one antenna. Attenuation figures of <0.5dB and isolation figures of 35dB typical. Available in either dual, triple or quad combiner configurations. Versions with 1.5MHz channel spacings are also available.
FTB-75000S
FM radio star point tri-combiner, 87.5-108.5MHz, 2.5MHz spacing, 3 x 2.5kW
The FTT-75000S is a FM star point tri-combiner, allowing 3 x frequencies within the FM band to be combined into one antenna. Attenuation figures of <0.3dB and isolation figures of 35dB typical. Available in either dual, triple or quad combiner configurations. Versions with 1.5MHz channel spacings are also available.
FTT-3000S
FM radio star point tri-combiner, 87.5-108.5MHz, 1.5MHz spacing, 3 x 500W
The FTT-3000S is a FM star point tri-combiner, allowing 3 x frequencies within the FM band to be combined into one antenna. Attenuation figures of <0.6dB and isolation figures of 35dB typical. Available in either dual, tri or quad combiner configurations. Versions with 2.5MHz channel spacings are also available.
FTT-3000S-H
FM radio star point tri-combiner, 87.5-108.5MHz, 1.5MHz spacing, 3 x 1kW
The FTT-3000S-H is a FM star point tri-combiner, allowing 3 x frequencies within the FM band to be combined into one antenna. Attenuation figures of <0.6dB and isolation figures of 35dB typical. Available in either dual, tri or quad combiner configurations. Versions with 2.5MHz channel spacings are also available.
FTT-603S
FM radio star point tri-combiner, 87.5-108.5MHz, 1.5MHz spacing, 3 x 200W
The FTT-603S is a FM star point tri-combiner, allowing 3 x frequencies within the FM band to be combined into one antenna. Attenuation figures of <0.8dB and isolation figures of 35dB typical. Available in either dual, tri or quad combiner configurations. Versions with 2.5MHz channel spacings are also available.
FTT-7500S
FM radio star point tri-combiner, 87.5-108.5MHz, 1.5MHz spacing, 3 x 2.5kW
The FTT-7500S is a FM star point tri-combiner, allowing 3 x frequencies within the FM band to be combined into one antenna. Attenuation figures of <0.5dB and isolation figures of 35dB typical. Available in either dual, tri or quad combiner configurations. Versions with 2.5MHz channel spacings are also available.
FDB-1001-M
FM radio coaxial double cavity filter, 87.5-108MHz, specify 500-800kHz, 1kW
The FDB-1001-M is a FM radio coaxial double cavity filter, Thru loss figures of <0.4dB and a return loss of better than 1.15:1 VSWR. The range of FM radio double cavity filters are available with N-type female through to 1-5/8" EIA terminations. Models with triple cavity are also available.
FDB-1001-N
FM radio coaxial double cavity filter, 87.5-108MHz, specify 500-800kHz, 800W
The FDB-1001-N is a FM radio coaxial double cavity filter, Thru loss figures of <0.4dB and a return loss of better than 1.15:1 VSWR. The range of FM radio double cavity filters are available with N-type female through to 1-5/8" EIA terminations. Models with triple cavity are also available.
FDB-1002-F
FM radio coaxial double cavity filter, 87.5-108MHz, specify 500-800kHz, 2kW
The FDB-1002-F is a FM radio coaxial double cavity filter, Thru loss figures of <0.3dB and a return loss of better than 1.15:1 VSWR. The range of FM radio double cavity filters are available with N-type female through to 1-5/8" EIA terminations. Models with triple cavity are also available.
FDB-1002-M
FM radio coaxial double cavity filter, 87.5-108MHz, specify 500-800kHz, 2kW
The FDB-1002-M is a FM radio coaxial double cavity filter, Thru loss figures of <0.3dB and a return loss of better than 1.15:1 VSWR. The range of FM radio double cavity filters are available with N-type female through to 1-5/8" EIA terminations. Models with triple cavity are also available.
FDB-1003-F
FM radio coaxial double cavity filter, 87.5-108MHz, specify 500-800kHz, 3kW
The FDB-1003-F is a FM radio coaxial double cavity filter, Thru loss figures of <0.3dB and a return loss of better than 1.15:1 VSWR. The range of FM radio double cavity filters are available with N-type female through to 1-5/8" EIA terminations. Models with triple cavity are also available.
FDB-1005-F
FM radio coaxial double cavity filter, 87.5-108MHz, specify 500-800kHz, 5kW
The FDB-1005-F is a FM radio coaxial double cavity filter, Thru loss figures of <0.2dB and a return loss of better than 1.15:1 VSWR. The range of FM radio double cavity filters are available with N-type female through to 1-5/8" EIA terminations. Models with triple cavity are also available.
FDB-1005-S
FM radio coaxial double cavity filter, 87.5-108MHz, specify 500-800kHz, 5kW
The FDB-1005-S is a FM radio coaxial double cavity filter, Thru loss figures of <0.2dB and a return loss of better than 1.15:1 VSWR. The range of FM radio double cavity filters are available with N-type female through to 1-5/8" EIA terminations. Models with triple cavity are also available.
FDB-1010-SC
FM radio coaxial double cavity filter, 87.5-108MHz, specify 500-800kHz, 10kW
The FDB-1010-SC is a FM radio coaxial double cavity filter, Thru loss figures of <0.15dB and a return loss of better than 1.15:1 VSWR. The range of FM radio double cavity filters are available with N-type female through to 1-5/8" EIA terminations. Models with triple cavity are also available.
FDB-102-N
FM radio 19" rack double cavity filter, 87.5-108MHz, specify 500-800kHz, 200W
The FDB-102-N is a FM radio double cavity filter, and will fit into a 3U spacing within a 19" (inch) rack. A 500-800kHz bandwidth within the FM radio frequency range 87.5-108MHz will be required when ordering. A triple cavity model is also available, see FDB-103-N.
FDB-1031-M
FM radio coaxial triple cavity filter, 87.5-108MHz, specify 400-1000kHz, 1.2kW
The FDB-1031-M is a FM radio coaxial triple cavity filter, Thru loss figures of <0.4dB and a return loss of better than 1.15:1 VSWR. The range of FM radio triple cavity filters are available with N-type through to 1-5/8" EIA terminations. Models with double cavity are also available
FDB-1031-N
FM radio coaxial triple cavity filter, 87.5-108MHz, specify 400-1000kHz, 800W
The FDB-1031-N is a FM radio coaxial triple cavity filter, Thru loss figures of <0.4dB and a return loss of better than 1.15:1 VSWR. The range of FM radio triple cavity filters are available with N-type through to 1-5/8" EIA terminations. Models with double cavity are also available
FDB-1033-F
FM radio coaxial triple cavity filter, 87.5-108MHz, specify 400-1000kHz, 3kW
The FDB-1033-F is a FM radio coaxial triple cavity filter, Thru loss figures of <0.4dB and a return loss of better than 1.15:1 VSWR. The range of FM radio triple cavity filters are available with N-type through to 1-5/8" EIA terminations. Models with double cavity are also available
FDB-1033-M
FM radio coaxial triple cavity filter, 87.5-108MHz, specify 400-1000kHz, 2kW
The FDB-1033-M is a FM radio coaxial triple cavity filter, Thru loss figures of <0.4dB and a return loss of better than 1.15:1 VSWR. The range of FM radio triple cavity filters are available with N-type through to 1-5/8" EIA terminations. Models with double cavity are also available
FDB-1035-F
FM radio coaxial triple cavity filter, 87.5-108MHz, specify 400-1000kHz, 5kW
The FDB-1035-F is a FM radio coaxial triple cavity filter, Thru loss figures of <0.35dB and a return loss of better than 1.15:1 VSWR. The range of FM radio triple cavity filters are available with N-type through to 1-5/8" EIA terminations. Models with double cavity are also available
FDB-1035-S
FM radio coaxial triple cavity filter, 87.5-108MHz, specify 400-1000kHz, 5kW
The FDB-1035-S is a FM radio coaxial triple cavity filter, Thru loss figures of <0.35dB and a return loss of better than 1.15:1 VSWR. The range of FM radio triple cavity filters are available with N-type through to 1-5/8" EIA terminations. Models with double cavity are also available
FDB-103-N
FM radio 19" rack triple cavity filter, 87.5-108MHz, specify 500-800kHz, 250W
The FDB-103-N is a FM radio triple cavity filter, and will fit into a 6U spacing within a 19" (inch) rack. A 500-800kHz bandwidth within the FM radio frequency range 87.5-108MHz will be required when ordering. A double cavity model is also available, see FDB-102-N.
ZVBF-18887-200
FM radio scaled single cavity band-pass filter, 87.5-108.5MHz, specify 200kHz, 250W - gold anodised
The ZVBF-18887-200 single cavity band pass filter will work within the FM Radio 87.5-108.5MHz frequency range, suitable for FM radio broadcast systems.The band-pass filter is ideal for recieve isolation. ZCG proudly manufacture their cavity band-pass filters in Australia for improved availability and customisation.
FRC-1
UHF Hybrid Coupler - 400-570MHz, 50-50 coupling ratio
The FRC-1 FM radio hybrid coupler combines two input signals into one output port, whilst maintaining better than 30dB of isolation between them. The FRC-1 is suitable for creating dual decked combiners or adding two power amplifiers.
FRC-10-H
FM radio hybrid coupler, 87.5-108MHz 1-5/8" EIA and 3-1/8" EIA, 2 x 10kW - 900mm
The FRC-10-H FM radio hybrid coupler combines two input signals into one output port, whilst maintaining better than 30dB of isolation between them. The FRC-10-H is suitable for creating dual decked combiners or adding two power amplifiers.
FRC-2
FM radio hybrid coupler, 87.5-108MHz 7/16" DINF and 7/8" EIA, 2 x 2kW - 450mm
The FRC-2 FM radio hybrid coupler combines two input signals into one output port, whilst maintaining better than 30dB of isolation between them. The FRC-2 is suitable for creating dual decked combiners or adding two power amplifiers.
FRC-5
FM radio hybrid coupler, 87.5-108MHz 7/8" EIA and 1-5/8" EIA, 2 x 5kW - 500mm
The FRC-5 FM radio hybrid coupler combines two input signals into one output port, whilst maintaining better than 30dB of isolation between them. The FRC-5 is suitable for creating dual decked combiners or adding two power amplifiers.
FRC-5-H
FM radio hybrid coupler, 87.5-108MHz 7/8" EIA and 1-5/8" EIA, 2 x 5kW - 500mm
The FRC-5-H FM radio hybrid coupler combines two input signals into one output port, whilst maintaining better than 30dB of isolation between them. The FRC-5-H is suitable for creating dual decked combiners or adding two power amplifiers.
HBC3-FM
VHF-FM Hybrid Coupler - 88-108 MHz, 50-50 coupling ratio
The HBC3-FM hybrid coupler splits the input signal between two output ports, or combine two signals whilst maintaining high isolation between them. The HBC3-FM offers 3dB or 50-50 coupling ratio. The HBC3-FM comes standard with N-type female input and output ports and a 5W N-type male small heatsink dummy load and is ...
FDB-530-C
UHF single cavity band-pass filter, 430-560MHz, specify 300kHz, 100W
The FDB-530-C single cavity band-pass filter will work within the UHF 430-560MHz frequency range, suitable for UHF communications.The FDB-530-C has band-pass attenuation levels of 0.3-0.9dB. A notch (band elimination) filter model is available, see FDN-530-C.
FDN-530-C
UHF single cavity notch filter, 430-560MHz, specify frequency, 100W
The FDB-530-C single cavity notch filter will work within the UHF 430-560MHz frequency range, suitable for UHF communications.The FDB-530-C has band-pass attenuation levels of 0.4-0.7dB and stop band attentuation of >25dB. A band-pass version is also available, see FDB-530-C.
ZSGQ-400
UHF 6-pole duplexer, 375-440MHz, N-type female, 40W
The ZSGQ-400 UHF duplexer filter is a 6 cavity configuration, suitable for any UHF duplexed system. Isolation is greater than 70-75dB and insertion loss is min. 1.0dB and max. 1.2dB. ZCG offer a range of duplexers working within the VHF and UHF frequency ranges.
ZSGQ-450
UHF 6-pole duplexer, 400-520MHz, N-type female, 50W
The ZSGQ-450 UHF duplexer filter is a 6 cavity configuration, suitable for any UHF duplexed system. Isolation is greater than 80 dB and insertion loss is less than 1.0dB. ZCG offer a range of duplexers working within the VHF and UHF frequency ranges.
ZSGQ-480
UHF 6-pole duplexer, 440-520MHz, N-type female, 50W
The ZSGQ-480 UHF duplexer filter is a 6 cavity configuration, suitable for any UHF duplexed system. Isolation is greater than 75dB and insertion loss is less than 1.0dB. ZCG offer a range of duplexers working within the VHF and UHF frequency ranges.
ZSGQ-480H
UHF 6-pole duplexer, 440-520MHz, N-type female, 50W
The ZSGQ-480H UHF duplexer filter is a 6 cavity configuration, suitable for any UHF duplexed system. Isolation is greater than 75dB and insertion loss is less than TX 1.0dB and RX 1.2dB. ZCG offer a range of duplexers working within the VHF and UHF frequency ranges.
ZUBF-18883
ZUBF-18883 Single pole Cavity filter
UHF Bandpass single pole cavity filter, low loss. Can be added into a complete wideband Band pass filter system.
RXMUX-350-520-2
UHF 2-way RX multicoupler, 350-520MHz, 5MHz bandwidth
A multicoupler combines the input of multiple external receive signals from a single antenna. Suitable for UHF communication installations.The RX port on the rear connects to the receiver/s and the ANT port connectors to the duplexer low port or the receive antenna.
RXMUX-350-520-3
UHF 3-way RX multicoupler, 350-520MHz, 5MHz bandwidth
A multicoupler combines the input of multiple external receive signals from a single antenna. Suitable for UHF communication installations.The ?RX? port on the rear connects to the receiver/s and the ?ANT? port connectors to the duplexer low port or the receive antenna.
RXMUX-350-520-4
UHF 4-way RX multicoupler, 350-520MHz, 5MHz bandwidth
A multicoupler combines the input of multiple external receive signals from a single antenna. Suitable for UHF communication installations.The ?RX? port on the rear connects to the receiver/s and the ?ANT? port connectors to the duplexer low port or the receive antenna.
RXMUX-350-520-8
UHF 8-way RX multicoupler, 350-520MHz, 5MHz bandwidth
A multicoupler combines the input of multiple external receive signals from a single antenna. Suitable for UHF communication installations.The ?RX? port on the rear connects to the receiver/s and the ?ANT? port connectors to the duplexer low port or the receive antenna.
TET-4pcom-4pspl
TETRA UHF 4-port combiner and 4-port splitter, Rx 453-459, Tx 463-469MHz, 25W
The TET-4pspl-4pcom combines both a splitter and combiner into one rack mounted device with noise figures for Rx of 3.5dB. TETRA is a digital licenced version of UHF communications used by courier companies, mining, securities and also emergency services. This TETRA 4-port combiner and 4-port splitter will fit into a ...
FDB-130
VHF single cavity band-pass filter, 160-180MHz, specify 200kHz, 100W
The FDB-130 single cavity band-pass filter will work within the VHF 160-180MHz frequency range, suitable for VHF communications.The FDB-130 has band-pass attenuation levels of 0.3-0.9dB.
FDB-50
VHF single cavity band-pass filter, 50-60MHz, specify 200kHz, 100W
The FDB-50 single cavity band-pass filter will work within the VHF 50-60MHz frequency range, suitable for VHF communications.The FDB-50 has band-pass attenuation levels of 0.3-0.9dB.
FDN-130
VHF single cavity notch filter, 160-180MHz, specify frequency, 100W
The FDN-130 single cavity notch (band elimination) filter will work within the VHF 160-180MHz frequency range, suitable for VHF communications.The FDB-130 has band-pass attenuation levels of 0.3-0.9dB and stop-band attentuation of >25dB.
FDN-50
VHF single cavity notch filter, 50-60MHz, specify frequency, 100W
The FDB-50 single cavity notch (band eliminiation) filter will work within the VHF 50-60MHz frequency range, suitable for VHF communications.The FDN-50 has band-pass attenuation levels of 0.3-0.6dB and a stop band attenuation of >25dB. A band-pass model FDB-50 is also available.
ZSGQ-150A
VHF 6 pole duplexer, 150-174MHz
The ZSGQ-150A VHF duplexer filter is a 6 cavity unit, suitable for radio telephones or any VHF duplexed system. Isolation is greater than 80dB. Insertion loss is greater than 1.0dB.
ZVBF-18886-150
VHF single pole band-pass filter, 148-174MHz - gold anodised
The ZVBF-18886-150 single cavity band pass filter will work within the VHF 148-174MHz frequency range, suitable for emergency services communications.The band-pass filter is ideal for recieve isolation. ZCG proudly manufacture their cavity band-pass filters in Australia for improved availability and customisation.
TXCOM-136-174-2
VHF 2-way TX hybrid combiner, 136-174MHz, 5MHz spacing, 50W per port
The TXCOM-136-174-2 hybrid combiner allows you to combine multiple transmitters at frequency spacing that are to close to be practicable for cavity/ferrite combiners, these combiners can come in 2, 3, 4, 6 and 8 sets while maintaining insertion loss of <3.5dB. Models with less ports as well as UHF models covering ...
TXCOM-136-174-3
VHF 3-way TX hybrid combiner, 136-174MHz, 5MHz spacing, 50W per port
The TXCOM-136-174-3 hybrid combiner allows you to combine multiple transmitters at frequency spacing that are to close to be practicable for cavity/ferrite combiners, these combiners can come in 2, 3, 4, 6 and 8 sets while maintaining insertion loss of <7.0dB. Models with less ports as well as UHF models covering ...
TXCOM-136-174-4
VHF 4-way TX hybrid combiner, 136-174MHz, 5MHz spacing, 50W per port
The TXCOM-136-174-4 hybrid combiner allows you to combine multiple transmitters at frequency spacing that are to close to be practicable for cavity/ferrite combiners, these combiners can come in 2, 3, 4, 6 and 8 sets while maintaining insertion loss of <7.0dB. Models with less ports as well as UHF models covering ...
TXCOM-136-174-6
VHF 6-way TX hybrid combiner, 136-174MHz, 5MHz spacing, 50W per port
The TXCOM-136-174-6 hybrid combiner allows you to combine multiple transmitters at frequency spacing that are to close to be practicable for cavity/ferrite combiners, these combiners can come in 2, 3, 4, 6 and 8 sets while maintaining insertion loss of <10.5dB. Models with less ports as well as UHF models covering ...
TXCOM-136-174-8
VHF 8-way TX hybrid combiner, 136-174MHz, 5MHz spacing, 50W per port
The TXCOM-136-174-8 hybrid combiner allows you to combine multiple transmitters at frequency spacing that are to close to be practicable for cavity/ferrite combiners, these combiners can come in 2, 3, 4, 6 and 8 sets while maintaining insertion loss of <10.5dB. Models with less ports as well as UHF models covering ...
RXMUX-136-174-2
VHF 2-way RX multicoupler, 136-174MHz, 5MHz bandwidth
A multicoupler combines the input of multiple external receive signals from a single antenna. Suitable for VHF or UHF communication installations.The ?RX? port on the rear connects to the receiver/s and the ?ANT? port connectors to the duplexer low port or the receive antenna.
RXMUX-136-174-3
VHF 3-way RX multicoupler, 136-174MHz, 5MHz bandwidth
A multicoupler combines the input of multiple external receive signals from a single antenna. Suitable for VHF or UHF communication installations.The ?RX? port on the rear connects to the receiver/s and the ?ANT? port connectors to the duplexer low port or the receive antenna.
RXMUX-136-174-4
VHF 4-way RX multicoupler, 136-174MHz, 5MHz bandwidth
A multicoupler combines the input of multiple external receive signals from a single antenna. Suitable for VHF or UHF communication installations.The ?RX? port on the rear connects to the receiver/s and the ?ANT? port connectors to the duplexer low port or the receive antenna.
RXMUX-136-174-8
VHF 8-way RX multicoupler, 136-174MHz, 5MHz bandwidth
A multicoupler combines the input of multiple external receive signals from a single antenna. Suitable for VHF or UHF communication installations.The ?RX? port on the rear connects to the receiver/s and the ?ANT? port connectors to the duplexer low port or the receive antenna.
HM212
Marine HF fold down mount antenna, 2-30MHz - 3.7m
The HM212 fold down mount antenna is suitable for HF 2-30MHz marine communications on either a vessel or a structure/tower. The HM212 comes standard with a MM2 stainless steel fold-down mount.
HM215
Marine HF fold down mount antenna, 2-30MHz - 4.5m
The HM215 fold-down mount antenna is suitable for HF 2-30MHz marine communications on either a vessel or a structure/tower. The HM212 comes standard with a MM2 stainless steel fold-down mount.
HM300
Heavy-duty HF 3-piece antenna, 2-30MHz - 10m
The HM300 is a free standing, marine HF 2-30MHz radio, heavy duty mount antenna specifically designed for larger vessels or structure/tower installations. Please note a 1429 heavy-duty base is required, and assembly of the antenna is required.
HM218-M
Marine HF mast mount antenna, 2-piece, 2-30MHz, 2.1dBi - 6m
The HM218-M HF mast mount or side of vessel is suitable for all HF communications within the 2-30MHz range.
HM223-M
Marine HF mast mount antenna, 2-piece, 2-30MHz, 2.1dBi - 8.1m
The HM223-M marine HF mast mount or side of vessel mount is suitable for all HF communications within the 2-30MHz range. The 2-piece design allows for reduced size for transport and storage.
ZM21-27
27MHz communications deck mount antenna, 27.88MHz, 2.1dBi - 2.1m
The ZM21-27 Marine 27MHz deck mount antenna, is suitable for 27MHz communications whilst at sea. The ZM21-27 requires either a MM1 white nylon fold down base or MM2 stainless steel fold down base.
ZM24-27
27MHz communications antenna, 27.88MHz, 2.1dBi - 2.4m
The ZM24-27 Marine 27MHz deck mount antenna, is suitable for 27MHz communications whilst at sea. The ZM24-27 requires either a MM1 white nylon fold down base or MM2 stainless steel fold down base. ZCG recommend mounting the ZM24-27 as high on your vessel or structure as possible to ensure a true omni-directional ...
ZSPL-2
2-Way AM/FM and 27MHz VHF band splitter
This 2-way splitter allows the connection of the AM/FM radio into the 27MHz VHF antenna feed cable.
HM2800
Coastguard 27MHz mast mount collinear, 27.68-27.98MHz, 2.1dBi - 6.2m
Built to full commercial specifications, HM2800 coastguard 27MHz marine collinear is suitable for extreme marine conditions for 27MHz communincations.
ZM108A
27MHz CB Radio Collinear - 2.8m
The ZM108A 27MHz ground independent mast mount or side mount antenna is suitable for marine radio communications.
ZM204
Telescopic 5-piece 27MHz marine CB radio collinear - 5.1m
The ZM204 27MHz 5-piece teloscopic collinear has the added advantage of a small storage and transport size. Suitable for 27MHz communuications on either your vessel or structure. Please note: assembly of this antenna is required before installation.
ZM312H
Ground Dependent Marine 27MHz Whip - 27.88MHz
For metal constructed watercraft a ground dependent fibreglass whip is suitable, using a large flat surface as the ground plane the ZM312H is designed for 27.88MHz marine radio communications while at sea.
ZM14-AIS
Automatic Identification System Antenna, 161.975-162.025MHz - 1.4m
Automatic Identification System is a safety systems for all commerical vessels above 300 Tonnes, ensuring safety in conjested waterways. ZCG's ZM14-AIS is a vessel mounting antenna designed for both deck or mast mounting, please order mounting hardware seperate. Choose from our MM1 or MM2 range or any of out mast ...
B20G-N-AIS
Automatic Identification System Mast Mount Collinear 161.975-162.025MHz - 3.2m
The B20G-N-AIS mast/side mount A.I.S collinear is designed and manufactured for the Automatic Identification System, which transmits vessel size, weight and heading to surrounding vessels within the 161.975-162-.025MHz frequency range.
CM162-AIS-MM
AIS mast mount collinear 161.975-162.025MHz - 1.4m
The CM162-AIS-MM is a marine mast mount collinear specifically designed for Automatic Identification System (AIS) on marine vessels or structures. A.I.S. is a safety system for vessels on the waterways, broadcasting heading, ship origin, vessel size and type. See your local nautical authority for is A.I.S. in ...
ZAU-SA-300
Active GPS Timing Antenna - 1575.42MHz
The ZAU-SA-300 dual filtered GPS antenna is perfect for fixed position timing applications, all within a low profile, fully waterproof design.
ZM09-AMFM
AMFM radio receive marine fold down antenna, white, receive only - 900mm
The ZM09-AMFM marine AM/FM antenna is suitable for mounting to your vessel for AM/FM radio improvement while at sea. A MM1 white nylon fold down base or MM2 stainless steel fold down base will be required.
ZM09-AMFM-B
AM/FM radio receive marine fold down antenna, black, receive only - 900mm
The ZM09-AMFM-B marine AM/FM antenna is suitable for mounting to your vessel for AM/FM radio improvement while at sea. A MM1-B black nylon fold down base or MM2-B black stainless steel fold down base will be required.
ZM21-AMFM
Marine AM/FM receive deck mount antenna - solderless radio connector, receive only - 2.1m
The ZM21-AMFM marine AMF/FM radio recieve antenna is suitable for mounting to your vessel to improve AM/FM radio while at sea. A MM1 white nylon fold down base or MM2 stainless steel fold down base is required.
ZM24-AMFM
AM/FM radio receive collinear, receive only - 2.4m
The ZM24-AMFM marine AMF/FM radio recieve antenna is suitable for mounting to your vessel to improve AM/FM radio while at sea. A MM1 white nylon fold down base or MM2 stainless steel fold down base is required.
HM218-AMFM
AM/FM receive mast mount collinear - 5.5m
The HM218-AMFM deck mount model is suitable for AM/FM receive whilst at sea. Suitable for larger vessels or mounting to a structure or tower, using suitable mounting hardware.
ZM09-CELL
Telstra, Optus & Vodafone 4G & 3G fold down antenna, 825-960 & 1710-2190MHz, 6.2 & 3dBi - 900mm
The ZM09-CELL is suitable for mobile phone reception and wireless data on Telstra, Optus and Vodafone 4G & 3G (Next G) mobile phone networks while at sea. The ZM09-CELL requires a MM1 white nylon fold down base or MM2 stainless steel fold down base.
ZM09-CELL-B
Telstra, Optus & Vodafone 4G & 3G fold down antenna, 825-960 & 1710-2190MHz, 6.2 & 3dBi - 900mm
The ZM09-CELL-B is suitable for mobile phone reception and wireless data on Telstra, Optus and Vodafone 4G & 3G (Next G) mobile phone networks while at sea. The ZM09-CELL-B requires a MM1 white nylon fold down base or MM2 stainless steel fold down base.
ZM18-4GX
4GX, 4G Plus & 4G LTE marine deck mount antenna, 700-788MHz, 8.1dBi - 1.8m
The ZM18-CELL Telstra 4GX, Optus 4G Plus and Vodafone 4G LTE deck mount, offers the maximum gain and reception range practical in a omni-directional, mobile phone/wireless data fixed position collinear. To mount the ZM18-4GX to your deck or other structure ZCG recommends the use of a MM1 plastic or MM2 stainless steel ...
ZM21-4GX
Omni-directional 4G LTE collinear, 700-788MHz, 8.1dBi - 2.1m
The ZM21-4GX, Telstra 4GX, Optus 4G Plus and Vodafone 4G LTE deck mount, offers the maximum gain and reception range practical in a omni-directional, mobile phone/wireless deck mount collinear. To mount the ZM21-4GX to your deck or other structure ZCG recommends the use of a MM1 plastic or MM2 stainless steel 2-way ...
ZM21-CELLG
Optus & Vodafone 3G mobile phone marine antenna, 890-960MHz, 8.1dBi - 2.1m
The ZM21-CELLG is suitable for mobile phone reception and wireless data on the Optus and Vodafone 3G mobile phone network while at sea. The ZM21-CELLG requires a MM1 white nylon fold down base or MM2 stainless steel fold down base. ZCG recommend mounting the ZM21-CELLG as high on your vessel or structure as possible ...
ZM21-CELLN
Telstra 3G mobile phone marine antenna, 825-890, 8.1dBi - 2.1m
The ZM21-CELLN is suitable for mobile phone reception and wireless data on theTelstra 3G mobile phone network while at sea. The ZM21-CELLN requires a MM1 white nylon fold down base or MM2 stainless steel fold down base. ZCg recommend mounting the ZM21-CELLN as high on your vessel or structure as possible to ensure ...
ZM24-CELLN
Telstra 3G Mobile Phone Marine Antenna - 825-890MHz
The ZM24-CELLN is suitable for mobile phone reception and wireless data on Telstra 3G mobile phone networks while at sea. The ZM24-CELLN requires a MM1 nylon fold down mount or MM2 stainless steel fold down mount.
ZM700-4GX
ZM700-4GX
Super gain 4GX antenna, 718-788 MHz, purposely designed to operate in the Telstra 4GX frequency range. 700 MHz. This antenna does operate in the higher 800 MHz band.
SGDB-SS-S
Oceanic Sealed Telstra, Optus and Vodafone 4G, 3G & GSM Mast Mount Collinear
The SGDB-SS-S oceanic sealed Telstra, Optus and Vodafone 4G, 3G and GSM mobile phone, mast mount collinear is suitable for extreme coastal or desert conditions.
ZM09-477
Marine UHF CB radio antenna, 477MHz, 2.1dBi - 900mm
The ZM09-477 marine UHF CB radio antenna is suitable for mounting to your vessel for 477MHz UHF Communications while at sea. The ZM09-477 requires a MM1 white nylon fold down base or MM2 stainless steel fold down base. The ZM09-477 is identical in apperance with the rest of the ZM09 range.
ZM21-477
Marine UHF CB deck mount antenna, 477MHz, 8.1dBi - 2.1m
The ZM21-477 Marine UHF CB Radio Antenna is suitable for 477MHz UHF Communications while at sea. Standard with 4.5 metres of cable and UHF Male supplied, a maximum power rating of 50 Watts and 8.1dBi gain. The ZM21-477 requires either a MM1 white nylon fold down base or MM2 stainless steel fold down base.
ZM21-UHF
UHF marine scaled deck mount antenna, 400-520MHz, specify 1.5%, 8.1dBi - 2.1m
The ZM21-UHF Marine UHF antenna, requires a specified 1.5% bandwidth upon ordering. Standard with 4.5 metres of cable and a UHF male (PL259) supplied which will be required to be fitted to required cable length. The ZM21-UHF requires either a MM1 white nylon fold down base or MM2 stainless steel fold down base. ZCG ...
ZM21-VHF
Marine VHF deck mount antenna, 156-162MHz, 2.1dBi - 2.1m
The ZM21-VHF marine VHF deck mount antenna is suitable for marine vessel VHF communications within the 156-162MHz frequency range. The ZM21-VHF requries a MM1 white nylon fold-down base or MM2 stainless steel fold-down base. ZCG recommend mounting the ZM21-VHF as high on your vessel or structure as possible to ensure ...
ZM24-VHF
Marine VHF Communications Deck Mount Antenna - 156-162MHz
The ZM24-VHF marine VHF communications deck mount antenna comes standard at 2.4m tall with 4.5 metres of cable and a UHF male supplied. With 5.1dBi gain and a power rating of 50 Watts the ZM24-VHF is the ideal marine VHF communications antenna. The ZM24-VHF requries a MM1 white nylon fold-down base or MM2 stainless ...
B20G
Marine VHF Omni-directional Collinear - 156-162MHz
The B20G Omni-directional VHF mast mount collinear comes standard at 3.4 metres with 4.5 metres of RG58 exiting from the base of the 304 grade 38mm diameter stainless steel moutning handle with a UHF Male supplied. A power rating of 50 Watts and gain performance of 5.1dBi across the entire VHF range 156-162MHz makes ...
B20G-N
Omni-directional Marine VHF Collinear - 156-162MHz
The B20G-N omnidirectional marine VHF collinear comes standard at 3.4 metres with a N-Type Female at the base of the 304 grade 38mm diameter stainless steel mounting section. A power rating of 50 Watts and gain performance of 5.1dBi across the entire VHF range 156-162MHz makes the B20G the ideal solution for mast ...
ZM312V
Ground Dependent Marine VHF Whip - 156-162MHz
The ZM312H ground dependent VHF whip comes standard in white at 500mm tall, with 4.5 metres of cable exiting from the bottom of the Australian standard base with an FME female fitted, a FME male to UHF male is included for ease of installation. The ZM312V has a maximum power rating of 25 Watts and gain performance of ...
ZW312V
White marine VHF whip (156 MHz) (5/16"-26TPI Thread) (2.1dBi) - 445mm
The ZW312H fibreglass whip is designed for VHF marine Communications while at sea. Whip only
ZW312VB
Black marine VHF whip (156 MHz) (5/16"-26TPI Thread) (2.1dBi) - 445mm
The ZW312H fibreglass whip is designed for VHF marine Communications while at sea. Whip only
MM1
Deck Mount 2-Way Swivel Mount, White - 1"-14 UNS Male Thread
The MM1 2-way fold down deck mount is suitable for all ZCG ZM marine range antennas. To mount the MM1 base use the 4 x 8mm holes located on the base of the mount. The dual fold down mount allows mounting to any surface and ensures the optimum vertical polarisation is achievable. Ensure your antenna is mounted in a ...
MM1-B
Deck Mount 2-Way Swivel Mount, Black - 1"-14 UNS Male Thread
The MM1-B black 2-way fold down deck mount is suitable for all ZCG ZM marine range antennas. To mount the MM1-B base use the 4 x 8mm holes located on the base of the mount. The dual fold down mount allows mounting to any surface and ensures the optimum vertical polarisation is achievable. Ensure your antenna is ...
MM2
2-Way fold-down/swivel mount, 316 stainless steel - 1"-14 UN male thread
The MM2 stainless steel heavy duty 2-way fold down deck mount is suitable for all ZCG ZM marine range antennas. To mount the MM2 base use the 4 x 8mm holes located on the base of the mount. The dual fold down mount allows mounting to any surface and ensures the optimum vertical polarisation is achievable. Ensure your ...
MM2-B
Deck 2-Way Fold Down Mount, Black Stainless Steel - 1"14UNS Thread, 316 Grade
The MM2-B black stainless steel heavy duty 2-way fold down deck mount is suitable for all ZCG ZM marine range antennas. To mount the MM2-B base use the 4 x 8mm holes located on the base of the mount. The dual fold down mount allows mounting to any surface and ensures the optimum vertical polarisation is achievable. ...
3050
Deck Mount to Mast Mount Adaptor, Brass - 1-14" UNI to 1/2"-12 BSW
The 3050 deck mount to mast mount adaptor is suitable for any ZCG marine range antenna to be converted to a mast, tower or structure mount antenna using any MMA series mast mount adaptor.
4266
Mast Mount Adaptor, Aluminium - 1/2"-12 BSW
The 4266 mast mount adaptor is suitable for modifying your SG Series vehicle mount to a fixed position mast mount. Remove the spring base from your vehicle mount SG series and attach on the 4266, ensure it is tight against the mounting ferrule of the SG series antenna. ZCG recommened the use of 2 x EB1-SS or 1 x ...
A-3050-3C
Deck Mount to Mast Mount Adaptor - M14 x 2.0mm x 20mm thread
The A-3050-3C deck to mast mount adaptor suits ZCG HF whip for mounting to any base with a M14 thread.
MMA
Marine Mast Mount Adaptor, Aluminium - 250mm
The MMA aluminium mast mount adaptor is suitable for modifying or mounting your marine ZM deck mount antenna to a fixed position mast mount antenna. Remove the MM1 or MM2 fold down deck mount from your ZM Series and attach on the MMA, ensure it is tight against the mounting ferrule of the ZM series marine antenna. ZCG ...
MMA-1200
Marine Mast Mount Adaptor, Aluminium - 1200mm
The MMA-1200 aluminium mast mount adaptor is suitable for modifying or mounting your marine ZM deck mount antenna to a fixed position mast mount antenna. Remove the MM1 or MM2 fold down deck mount from your ZM Series and attach on the MMA-1200, ensure it is tight against the mounting ferrule of the ZM series marine ...
MMA-SS
Marine Mast Mount Adaptor, Stainless Steel - 250mm
The MMA-SS stainless steel mast mount adaptor is suitable for modifying or mounting your marine ZM deck mount antenna to a fixed position mast mount antenna. Remove the MM1 or MM2 fold down deck mount from your ZM Series and attach on the MMA-SS, ensure it is tight against the mounting ferrule of the ZM series marine ...
NSM-218
Marine Side or Wall Mount, White - 38mm antenna hole
The NSM-218 nylon side mount is suitable for mounting 38mm diameter mount section antennas like the HM218-M to either the side of your vessels wheelhouse or structure or wall mounting using the 1-1/4" bolt supplied. ZCG recommend the use of 2 x NSM-218 at the top and bottom of your antennas mounting section to ensure ...
NSM-223
Marine Side or Wall Mount, white - 38mm antenna hole
The NSM-223 nylon side mount is suitable for 50mm diameter mount section antennas like the HM223-M to either the side of your vessels wheelhouse, structure or wall mounting using the x 5/8"-11BSW bolt supplied. ZCG recommend the use of 2 x NSM-223 at the top and bottom of your antennas mounting section to ensure the ...
NSM-B20M
Marine Side or Wall Mount, White - 20mm antenna hole
The NSM-B20M nylon side mount is suitable for 20mm diameter mount section antennas like the ZM108A, CM1600AM or CMG1600AM to either the side of your vessels wheelhouse, structure or wall mounting using the 1-1/4" bolt supplied. ZCG recommend the use of 2 x NSM-B20M at the top and bottom of your antennas mounting ...
NSM-CL3642
Marine Side or Wall Mount, White - suits 32mm antenna hole
The NSM-CL3642 nylon side mount is suitable for 32mm diameter mount section antennas like the B20G or B20G-N to either the side of your vessels wheelhouse, structure or wall mounting using the 1-1/4" bolt supplied. ZCG recommend the use of 2 x NSM-CL2642 at the top and bottom of your antennas mounting section to ...
2572-2
Camera mount clamp plate (Fierco masts)
2572-5
Heavy duty camera mount clamp plate (Fireco masts)
AI.32011
Air compressor 230 V/240 V, flow rate 185L/M(no remote control) non-return valve, tank capacity 6L, max pressure 8bar
AI.32061
Air compressor (12V, flow rate 166L/M, 0.6 kW, 2550 rpm, noise level 75 dB(A)
AI.32063
Air compressor 12V, flow rate 173 L/M, 60A, max 8bar (remote control, non-return valve)
AIR COMPRESSOR
Ruggedizd Large Compressor, 24V, 0.56 KW, 150 litre /min with corded remote control, pressure control
BG.31121
Mast bag (mast ret. 1.4m)
BJ.31201
Base with joint (66mm mast)
BK.30002
Fireco roof bracket (round) (66mm mast)
BK.30005
Fireco roof bracket (round) (80mm mast)
BK.30007
Fireco roof bracket (round) (152mm mast)
BK.30009
Fireco roof bracket (round) (101mm mast)
BK.30051
Fireco roof bracket (square) (80mm mast)
BK.30052
Fireco roof bracket (square) (66mm mast)
BK.30056
Fireco roof bracket (square) (66mm mast)
BK.30057
Fireco roof bracket (square) (152mm mast)
BK.30058
Fireco roof bracket (square) (200mm mast)
BK.30059
Fireco roof bracket (square) (101mm mast) - incl. water-proof gasket
BK.30061
Square roof bracket to suit 250mm diameter mast
BK.30076.1
Fireco Panel Mounting Bracket for mast and tripod
BK.30102
Fireco lower fixing bracket (to suit 77mm mast)
BK.30104
Fireco lower fixing bracket (to suit 90mm mast)
BK.30105
Fireco lower fixing bracket - to suit 80mm mast
BK.30106
Fireco lower fixing bracket (to suit 115mm mast)
BK.30107
Fireco lower fixing bracket (to suit 152 & 200mm mast)
BK.30108
Fireco lower fixing bracket (to suit 200mm mast)
BK.30109
Fireco lower fixing bracket (suits 101mm mast)
BK.30111
Fireco lower fixing bracket (suits 250mm mast)
BK.30201
Fireco upper fixing bracket (to suit 66mm mast)
BK.30202
Fireco upper fixing bracket (to suit 64mm mast)
BK.30203
Fireco upper fixing bracket (to suit 77mm mast)
BK.30204
Fireco upper fixing bracket (to suit 90mm mast)
BK.30205
Fireco upper fixing bracket - to suit 80mm mast
BK.30206
Fireco upper fixing bracket (to suit 115mm mast)
BK.30207
Fireco upper fixing bracket (to suit 152mm mast)
ES24X300
FIRECO - 24mm diameter extension spigot x 300mm long
GC.30812
Turnable 3 ring guy collar (180mm)
GS.34002
Fireco grease (190g)
HA.31301
Hammer 2 Kgs
PN.11169-1
Mounting Pin 24mm to suit mast head
PN.30151
Cable Guides
PN.31007
Adaptor - 24mm pin to suit 4 bolt head mast
PN.31050
Cable Guide (48 mm)
PN.31051
Cable Guide - per set fitted (30 mm)
PN.31051-EL
Helicoidal Cable Guide (80 mm)
PN.31054
Cable guide (40mm) - helicoidal
RP.30600.1
Guy rope 8m, with tensioner
RP.30601
Guy rope 6m, with anodised cleat
RP.30602
Guy rope 10m ,with anodised cleat
RP.30602.1
Guy rope 10m
RP.30604
Guy rope 20m, with anodised cleat
RP.30604.1
Guy rope 20m
RP.30607
Guy rope 25m, with anodised cleat
RP.30607.1
Guy rope 25m
TP.115
TRIPOD - to suit 115mm diameter 4 section mast
TP.34441.6
Sand scraper ring set to suit CP.56XX (66mm) masts
TP.34442.4
Sand scraper ring set to suit CO.54XX (80mm) masts
TP.34443.10
Sand scraper ring set to suit CM.51XX (101mm) masts
TP.35301
Fireco tri-pod (66mm dia.) (leg 850mm) (masts ext. 6.99m)
TP.35302
Fireco tri-pod (66mm dia.) (leg 1100mm) (masts ext. 9.99m)
TP.35303
Fireco tri-pod (66mm dia) (leg 1500mm) (masts ext. 14.99m)
TP.35311
Fireco tripod (101mm dia.) (leg 1100mm)
TP.35315
4-leg assembly (152mm mast)
TP.35317
4-leg assembly (80mm mast)
TP.35410
Fireco tri-pod (leg 800mm) (mast ext. 7m)
TP.35431
Sand scraper ring set (masts 52-59mm) (no. sections, minus 1)
TP.35432
Sand scraper ring set (masts 66-73mm) (no. sections, minus 1)
TP.35433
Sand scraper ring set (masts 80-101mm) (no. of sections, minus 1) ncl 4 x TP.35433, 2 x TP.35432 and 2 x TP.35431
TP.35434
Sand scraper ring set to suit CP.56XX, CO.57XX or CM.501X masts
TP.35435
Sand scraper ring set (masts 80-101mm) (no. sections, minus 1)
TP.77
TRIPOD - to suit 77mm diameter, 3 section mast
PMCH.3518.TA
Fireco 5 section mast (heavy 152mm) ext. 15.035m, ret. 3.715m (internal cable available)
PMCH.3903.NA
Fireco 9 section mast (heavy 152mm) ext. 8.3m, ret. 1.69m (internal cable available)
PMCH.6618.NUS-RAS
Fireco 6 section "Heavy Steady"mast (152mm) ext. 5.903m, ret. 1.657m (internal cable)
PMCH.6801.NA
Fireco 8 section mast (heavy steady 152mm) ext. 6506mm, ret. 1620mm
PMCL.3336.RA.12
Fireco 3 section mast (light 90mm) ext. 5.16m, ret. 2.11m (elec. turn. base)
PMCM.5007.H
Fireco 10 section mast (maxi primo 101mm) ext. 6.047m, ret. 1.25m
PMCM.5007.H-RAS
Fireco 10 section mast (maxi primo 101mm) ext. 6.047m, ret. 1.304m with sandsraper rings
PMCM.5106.H
Fireco 11 section mast (maxi primo 101mm) ext. 12.5m ret. 1.810m
PMCM.5106.H-RAS
Fireco 11 section mast (maxi primo 101mm) ext. 12.5m ret. 1.810m with sandscraper rings
PMCM.5908.H
Fireco 9 section mast (maxi primo 101mm) ext. 20m, ret. 3.1m (guy collars)
PMCN.5212.PB
Fireco 2 section mast (entry 66mm) ext. 2.5m, ret. 1.45m (internal wiring)
PMCO.5427.H
Fireco mast 4 section (super primo 80mm) ext. 6m, ret. 1.81m
PMCO.5427.H-RAS
Fireco mast 4 section (super primo 80mm) ext. 6m, ret. 1.81m - with sandscraper rings
PMCO.5621.H
Fireco mast 6 section (super primo 80mm) ext. 10m, ret. 2.2m
PMCO.5621.P
Fireco mast 6 section (super primo 80mm) ext. 10m, ret. 2.2m
PMCO.5623.H
Fireco mast 6 section (super primo 80mm) ext. 12m, ret. 2.8m
PMCO.5702.H
Fireco mast 7 section (super primo 80mm) ext. 6m, ret. 1.360m
PMCO.5702.H-RAS
Fireco mast 7 section (super primo 80mm) ext. 6m, ret. 1.360m with sand scraper rings
PMCO.5706.H
Fireco mast 7 sections (super primo 80mm) ext.10.018m, ret. 1.975m,
PMCO.5706.H-RAS
Fireco mast 7 sections (super primo 80mm) ext.10m, ret. 1.975m, with sandscraper rings
PMCO.5711.H
Fireco mast 7 section (super primo 80mm) ext. 15m, ret. 2.775m (2 x 3 guy ropes)
PMCO.5712.H
Fireco mast 7 section (super primo 80mm) ext. 17m, ret. 3m
PMCO.5805.H
Fireco mast 8 section (super primo 80mm) ext. 10.5m, ret. 1.940m
PMCO.5806.H
Fireco mast 8 section (super primo 80mm) ext. 12m, ret. 2.13m (2 guy rings)
PMCO.5806.H-RAS
Fireco mast 8 section (super primo 80mm) ext. 12m, ret. 2.13m with sandscraper rings
PMCP.5416.H
Fireco 4 section mast (PRIMO 66mm) ext. 6m, ret. 1.81m
PMCP.5416.H-RAS
Fireco 4 section mast (PRIMO 66mm) ext. 6m, ret. 1.81m with sandscraper rings
PMCS.3431.NB
Fireco 4 section standard mast (115mm) ext. 2.915m ret. 1.18m cable B (4 x 1.5mm sq), non turnable mast, 1 series of guy collars)
PMCS.3520.NA
Fireco 5 section standard mast (115mm) ext. 5.99m, ret. 1.75m
PMCS.3523.TH
Fireco 5 section standard mast (115mm) ext. 8.025m, ret. 2.255m (turn. base, cable options)
PMCS.3524.NB
Fireco 5 section standard mast (115mm) ext. 8.99m, ret. 2.38m (internal elec. cable)
PMCS.3604.NA
Fireco 6 section standard mast (115mm) ext. 5.96m, ret. 1.61m
PMCS.3606.TH
Fireco 6 section standard light mast (115mm) ext. 8.135m, ret. 2.02m (turn. base, specify internal cable)
PMCS.3607.NA
Fireco 6 section standard light mast (115mm) ext. 9.3m, ret. 2.185m
PMCS.3704.NA
Fireco 7 section standard mast (115mm) ext. 5.76m, ret. 1.475m (internal cable available)
PMCS.3708.TB
Fireco 7 section standard mast (115mm) ext. 9.295m, ret. 2.065m (turn. base, internal cable available)
PMCS.3709.RB
Fireco 7 section standard mast (115mm) ext. 10.52m, ret. 2.26m (elec. turn, internal cable available)
PMCS.3709.TH
Fireco 7 section standard mast (115mm) ext. 10.495m, ret. 2.235m (turn. base, internal cable available)
PMCS.63XX.NL.4
Fireco 3 section standard mast (115mm) ext. 3.975m, ret. 1.7m (internal cable)
PMCS.6433.NB-RAS
Fireco, 115mm 4 section mast (steady) ext. 3.920m, ret. 1.484m with sand scraper rings
PMCS.6435.NA
Fireco 4 section standard steady mast (115mm) ext. 4.913m, ret. 1.739m
PMCS.6435.NA-RAS
Fireco 4 section standard steady mast (115mm) ext. 4.913m, ret. 1.739m with sand scraper rings
PMCS.6437.NA
Fireco 4 section standard mast (115mm) ext. 6.037m, ret. 2.032m
PMCS.6520.NB
Fireco 5 section standard mast (115mm) ext. 6.058m, ret. 1.818m (internal cable)
PMCS.6520.NUS-RAS
Fireco 5 section "Standard Steady"mast (115mm) ext. 5.872m, ret. 1.818m (internal cable)
PMCS.6523.NA
Fireco 6 section standard mast (115mm) ext. 8.058m, ret. 2.238m no internal wiring
PMCS.6604.N
Fireco 6 section standard mast (115mm) ext. 5.995m, ret. 1.684m
PMCS.6607.NA
Fireco 6 section standard mast (115mm) ext. 9.307m, ret. 2.279m no internal cable/lockabke collars
PMCS.6608.NA
Fireco 6 section standard mast (115mm)ext. 10.414m, ret. 2.449m
PMCS.6608.TA
Fireco 6 section standard steady mast (115mm) ext. 10.264, ret. 2.445m, lockable collars
PMCS.6608.TB
Fireco 6 section standard steady mast (115mm) ext. 10.264, ret. 2.445m, lockable collars and cable B 4 x 1.5mm sq
PMCS.6608.TB-RAS
Fireco 6 section standard steady mast (115mm) ext. 10.264, ret. 2.445m, lockable collars and cable B 4 x 1.5mm sq and sandscraper rings
PMCS.6716.NA
Fireco 7 section standard mast (115mm) ext. 20.0m, ret. 3.663m (pin connect., 4 guy collars)
PMCS.8704.NH
Fireco 7 section standard mast (115mm) ext. 5.76m, ret. 1.384m (internal elec. cable)
PMCU.3316.NA
Fireco 3 section mast (ultralight) ext. 2.25m, ret. 1.07m
PMCU.3409.TH
Fireco 4 section mast (ultralight) ext. 7m, ret. 2.27m
PMCU.6321.NB-RAS
Fireco, 77mm 3 section mast (ultralight) ext. 4.595m, ret. 1.895m with sand scraper rings
PMCX.3616.TA
Fireco 6 section mast (super heavy 200mm) ext. 12.035m, ret. 2.715m (turn. base, internal cable available, 4 bolt head)
PMCX.3620.NA
Fireco 6 section mast (super heavy 200mm) ext. 19.937m, ret. 4.135m (internal cable available)
PMCX.3718.TA
Fireco 7 section mast (super heavy 200mm)ext. 15.035m, ret. 3m (turn. base, internal cable available)
PMCX.3816.TE
Fireco 8 section mast (super heavy 200mm) ext. 6.535m, ret. 1.555m (turn. base, internal cable available)
PMCX.3916.TE
Fireco 9 section mast (super heavy 200mm)ext. 6535mm, ret. 1475 (turnable base, internal cable available)
PMCX.6401.1.TA4
Fireco 4 section mast (super heavy 200mm) ext. 3.047m, ret. 1.235m (turn. base)
PMCX.6816.NUS-RAS
Fireco 8 section "Super Heavy Steady"mast (200mm) ext. 6.445m, ret. 1.573m (internal cable)
PMCX.6924.NA-RAS
Fireco 9 section mast (super heavy steady 200mm) ext. 20.067m, ret. 3.291m with sandscraper rings and 2 x guy collar
PMCX.7008.NA
Fireco 8 section mast (super heavy 200mm) ext. 25.098m, ret. 3.448m (4 set 3 guy rings)
PMCX.7102.TA
Fireco 11 section mast (super heavy 200mm) ext. 10.090m, ret. 1.962m
PMCX.7102.TA-RAS
Fireco 11 section mast (super heavy 200mm) ext. 10.090m, ret. 1.962m with sandscraper rings
PMCX.7104.NA
Fireco 11 section mast (super heavy 200mm) ext. 15.104m, ret. 2.409m (2 set 3 guy rings)
PMCX.7203.NA
Fireco 12 section mast (super heavy 200mm) ext. 20.946m, ret. 2.757m (3 set 3 guy rings)
PMCX.7208.N
Fireco 12 section mast (super heavy 200mm) ext. 36.61m, ret. 4.015m
PMCZ.3308.TA
Fireco 3 section mast (zero 64mm) ext. 5.185m, ret. 2.095m with internal cable
ZGI40
Ground Independent 27MHz CB Radio Whip Antenna - 27MHz
The ZGI40 is a ground independent, 27MHz CB radio detachable whip antenna. The detachable whip is suited for situations where damage or vandalism may occur or when not in use. Removal of the whip is completed by unscrewing the whip from the base.
ZGI40-NZ
Ground Independent New Zealand 26MHz CB Whip - 26MHz
The ZGI40-NZ is a ground independent, New Zealand 26MHz land CB radio whip antenna designed for mounting either ona vehicle or fixed position to improve 26MHz communications.
ZGI40-NZ-TPM
Ground Independent New Zealand 26MHz CB Whip - 1.0m
The ZGI40-NZ-TPM is a ground independent, New Zealand 26MHz land CB radio whip designed for mounting either ona vehicle or fixed position using a 3/8"-24 UNF Male threaded bases to improve 26MHz communications.
ZGI40-TPM
Ground Independent land CB 27MHz Whip - 980mm
The ZGI40-TPM ground independent 27MHz CB Radio Whip is the can be mounted onto any base with a 3/8"-24UNF male thread or as a replacement for an existing ZGI40.
ZN5-27-06
27MHz CB Radio Fibreglass Whip - 27MHz
The ZN5-27-06 27MHz CB Radio fibreglass whip is specifically designed and manufactured for 27MHz land CB communications in both a fixed or vehicle mount location. The ZN5 series of whips can be fitted on any antenna base with a 5/16"-26 TPI male thread such as the OB4.7.
ZN5-27-10
27MHz CB Radio Fibreglass Whip - 1.0m
The ZN5-27-10 27MHz CB Radio fibreglass whip is specifically designed and manufactured for 27MHz land CB communications in both a fixed or vehicle mount situation. The ZN5 series of whips can be fitted on any antenna base with a 5/16"-26 TPI male thread such as the OB4.7.
ZN5-27-11
27MHz CB Radio Fibreglass Whip - 27MHz
The ZN5-27-11 27MHz CB Radio fibreglass whip is specifically designed and manufactured for 27MHz land CB communications in both a fixed or vehicle mount location. The ZN5 series of whips can be fitted on any antenna base with a 5/16"-26 TPI male thread such as the OB-4.7.
ZN5-27-12
27MHz CB Radio Base Loaded Whip - 27MHz
The ZN5-27-12 is a stainless steel base loaded whip for 27MHz CB radio communications. The ZN5-27-12 requires a metal ground plane to perform at the specified levels. The ZN5-27-12 can be mounted onto any base assembly with a 5/16"-26 Brass male thread, like the OB-4.7.
ZN5-27-15
27MHz CB Radio Fibreglass Whip - 27MHz
The ZN5-27-15 27MHz CB Radio fibreglass whip is specifically designed and manufactured for 27MHz land CB communications in both a fixed or vehicle mount location. The ZN5 series of whips can be fitted on any antenna base with a 5/16"-26 TPI male thread such as the OB-4.7.
ZN4-77-06
Ground Independent UHF CB Radio Elevated Feed Antenna - 477MHz
The ZN4-77-06 ground independent UHF CB mobile antenna is a elevated feed style which delivers excellent performance and medium gain mounted on a heavy duty 'barrel' stainless steel spring. The ZN4-77-06 is suitable for all radios available on the market with a UHF female connection.
ZN4-77-06S
Ground Independent UHF CB Elevated Feed Antenna - 477MHz
The ZN4-77-06S ground independent UHF CB mobile antenna is a elevated feed style which delivers excellent performance and medium gain mounted on a heavy duty 'parallel' stainless steel spring. The ZN4-77-06S is suitable for all radios available on the market with a UHF female connection.
ZN4-77-06S-TCP
Ground Independent UHF CB Elevated Feed Dual Whip Antenna - 477MHz
The ZN4-77-06S-TCP ground independent UHF CB antenna comes with a 6.6dBi and 2dBi whip for use either in urban or country locations where gain requirements differ. Both whips are easily detachable by un-screwing off the 5/16" thread. Mounted a top the robust parallel spring the ZN4-77-06S-TCP is suited for all extreme ...
ZN4-77-06-TCP
Ground Independent UHF CB Elevated Feed Dual Whip Antenna - 477MHz
The ZN4-77-06-TCP ground independent UHF CB antenna comes with a 6.6dBi and 2dBi whip for use either in urban or country locations where gain requirements differ. Both whips are easily detachable by un-screwing off the 5/16" thread. Mounted a top our robust 'barrel' spring the ZN4-77-06-TCP is suited for all extreme ...
ZN4-77-07
Ground Independent UHF CB Elevated Feed Antenna - 477MHz
The ZN4-77-07 ground independent UHF CB mobile antenna combines a stainless steel whip on an elevated feed body, which delivers excellent performance and medium gain mounted on a heavy duty stainless steel 'barrel' spring. The ZN4-77-07 is suitable for all radios available on the market with a UHF female connection.
ZN4-77-07S
Ground Independent UHF CB Elevated Feed Antenna - 477MHz
The ZN4-77-07S ground independent UHF CB mobile antenna combines a stainless steel whip on an elevated feed body, which delivers excellent performance and medium gain mounted on a stainless steel parallel spring. The ZN4-77-07S is suitable for all radios available on the market with a UHF female connection.
ZN4-77-09T
Top only ZN4-77-09 CB antenna
The ZN4-77-06-S-TCP is a ZCG value for your UHF CB requirements.
ZN3-77-10W-TPM
UHF CB Radio Detachable Antenna Top - 477MHz
The ZN3-77-10B-TPM UHF CB Radio antenna top is an ideal compromise between performance and size. Suitable for mounting on a ZN3-SB-S or an existing ZN3-77-10B.
ZN3-77-12B-TPM
UHF CB Radio Detachable Antenna Top - 477MHz
The ZN3-77-12B-TPM UHF CB Radio antenna top offers high gain in a robust construction, this antenna will deliver the maximum transmit and receive range over flat ground and is not suited for hilly or moutainous terrain. The ZN3-77-12B-TPM is suited for mounting on a ZN3-SB-L or as a replacement for an existing ...
ZN3-77-12W-TPM
UHF CB Radio Detachable Antenna Top - 477MHz
The ZN3-77-12W-TPM UHF CB Radio antenna top offers high gain in a robust construction, this antenna will deliver the maximum transmit and receive range over flat ground and is not suited for hilly or moutainous terrain. The ZN3-77-12W-TPM is suited for mounting on a ZN3-SB-L or as a replacement for an existing ...
SG477-B
Ground Independent UHF CB Radio Antenna - 477MHz
The SG477 UHF CB radio mobile antenna is suitable for all UHF CB radios on the market with UHF female input connection. Ideal for either fixed position or vehicle mounting the SG477-B is matching apperance to all other ZCG SG series antennas.
.jpg)
SG477-BLKR
Ground Independent UHF CB Radio Antenna - 477MHz
The SG477-BLKR UHF CB radio vehicle mount antenna is suitable for all UHF CB radios on the market with UHF female input connection. Ideal for either fixed position or vehicle mounting. Mount using a minimum 13mm hole or bracket with appropriate 13mm hole.
SG477-BR
Ground Independent UHF CB Radio Antenna - 477MHz
The SG477-BR UHF CB radio mobile antenna is suitable for all UHF CB radios on the market with UHF female input connection. Ideal for either fixed position or vehicle mounting the SG477-BR is matching apperance to all other ZCG SG series antennas.
SG477-W
Ground Independent UHF CB Radio Antenna - 477MHz
The SG477-W UHF CB radio mobile antenna is suitable for all UHF CB radios on the market with UHF female input connection. Ideal for either fixed position or vehicle mounting the SG477-W is matching apperance to all other ZCG SG series antennas.
SGL477-B
Ground Independent Lightweight UHF CB Radio Antenna - 477MHz
The SGL477-B is the lightweight UHF CB radio antenna version of our SG477-B. The SGL477-B differs with a parallel spring and the cable exits from the base of the spring.
.jpg)
SGL477-BLKR
All-black ground independent lightweight UHF CB radio antenna, 477MHz - 750mm
The SGL477-BLKR is the lightweight UHF CB radio antenna version of our SG477-BLKR. The SGL477-BLKR differs with a parallel spring and the cable exits from the base of the spring. Mount using a minimum 16mm hole or bracket with 16mm hole.
SGL477-BR
Ground Independent Lightweight UHF CB Radio Antenna - 477MHz
The SGL477-BR is the lightweight UHF CB radio antenna version of our SG477-BR. The SGL477-BR differs with a parallel spring and the cable exits from the base of the spring.
SGL477-W
Ground Independent Lightweight UHF CB Radio Antenna - 477MHz
The SGL477-W is the lightweight UHF CB radio antenna version of our SG477-W. The SGL477-W differs with a parallel spring and the cable exits from the base of the spring.
ZN3-77-10B
UHF CB Radio Detachable Antenna - 477MHz
The ZN3-77-10B detachable UHF CB radio antenna is suitable for situations where damage or vandalism may occur or when not in use. Removing the detachable top is as easy as releasing the tension grub screw and unscrewing the top from the spring base. Ensure the PVC cap is the placed over the exposed spring base ...
ZN3-77-10W
UHF CB Radio Detachable Antenna - 477MHz
The ZN3-77-10W detachable UHF CB radio antenna is suitable for situations where damage or vandalism may occur or when not in use. Removing the detachable top is as easy as releasing the tension grub screw and unscrewing the top from the spring base. Ensure the PVC cap is the placed over the exposed spring base ...
ZN3-77-11B
UHF CB Radio Detachable Antenna - 477MHz
The ZN3-77-11B detachable UHF CB Radio antenna offers a good balance between size and gain which is well suited for either hilly or flat country. The detachable design allows for removal of the antenna when damage or vandalism may occur or when not in use. Removal is as easy as releasing the tension grub screw and ...
ZN3-77-11W
UHF CB Radio Detachable Antenna - 477MHz
The ZN3-77-11W detachable UHF CB Radio antenna offers a good balance between size and gain which is well suited for either hilly or flat country. The detachable design allows for removal of the antenna when damage or vandalism may occur or when not in use. Removal is as easy as releasing the tension grub screw and ...
ZN3-77-12B
UHF CB Radio Detachable Antenna - 477MHz
The ZN3-77-12B detachable UHF CB Radio antenna offers the high gain which will deliver the maximum transmit and receive range over flat ground. This antenna does not suit hilly or urban environments. The detachable design allows for removal of the antenna top in situations where damage or vandalism may occur or when ...
ZN3-77-12W
UHF CB Radio Detachable Antenna - 477MHz
The ZN3-77-12B detachable UHF CB Radio antenna offers the high gain which will deliver the maximum transmit and receive range over flat ground. This antenna does not suit hilly or urban environments. The detachable design allows for removal of the antenna top in situations where damage or vandalism may occur or when ...
ZN1-77-00
UHF CB Radio Flexible Whip - 477MHz
The ZN1-77-00 477MHz UHF CB radio flexible whip can be be fitted on any antenna base with a 5/16"-26TPI male thread such as a OB-4.7. The small profile and simplistic design of the ZN1-77-00 is suitable for extreme conditions or vehicles such as bulldoozers, mining equipment or road-trains where a typical whip or ...
ZN1-77-02
UHF CB Radio Lightweight Flexible Whip Antenna - 477MHz
The ZN1-77-02 477MHz is a 477MHz UHF CB Radio flexible half-wave whip antenna ideally suited for situations where a standard whip or radome antenna is not suited such as mining equipment, agricultural equipment and situations where a low profile flexible whip is required.
ZN1-77-03
UHF CB Radio phased coil whip - 477MHz
The ZN1 series of whips are specifically designed and manufactured for UHF CB radio 477MHz. The ZN1-77-03 477MHz UHF CB Radio phased coil whip can be fitted on any antenna base with a 5/16"-26TPI male thread in either a fixed position or vehicle mount situation.
ZN1-77-04
UHF CB Radio fibreglass whip - 477MHz
The ZN1-77-04 477MHz UHF CB Radio fibreglass whip can be fitted on any base with a 5/16"-26TPI male thread in either a fixed position or vehicle mount location.
ZN1-77-04-W
UHF CB Radio Fibreglass Whip - 477MHz
The ZN1-77-04-W 477MHz UHF CB Radio fibreglass whip can be fitted on any base with a 5/16"-26TPI male thread in either a fixed position or vehicle mount location.
ZN3-77-04-AB
Ground Independent Detachable UHF CB Flexible Whip - 477MHz
The ZN3-77-04-AB is suitable for requirements where a larger, higher gain UHF CB antenna would vunerable to damage or where high gain is not necessary, the ZN3-77-04 series are the perfect substitute for UHF communications at the CB radio frequency 477MHz. The ZN3-77-04-AB top can be attached onto any existing ZN3-77 ...
ZN3-77-04-TPM
UHF CB Radio Detachable Whip Top - 477MHz
The ZN3-77-04-TPM is an ideal replacement for owners of our larger, higher gain UHF CB series of antennas. In situations where tall antennas might be subject to damage or high gain is not necessary the ZN3-77-04-TPM is the ideal solution. The ZN3-77-04-TPM can be attached onto any existing ZN3-77 spring base or as a ...
ZN5-27-06W
White CB radio Whip
This whip is designed for white applications, for Aluminium boats where the boat is the ground plane.
CT90
FM radio receive low profile antenna, 87.5-108.5MHz - 865mm
The CT90 FM Radio receive low profile antenna is suitable for situations where damage or vandalism may occur. Standard with a N-type female protruding out the base and overall dimensions of 865mm long, 80mm wide and 60mm tall there are 6 x 8mm mounting holes and 1 x 13mm hole for the N-Type Female.
CR36-TPM
AM/FM radio receive whip - 1.0m
To boost AM and FM radio reception whilst travelling, the CR36-TPM whip comes standard with a 5/16"-26 Brass thread in the ferrule, and is suitable for mounting onto CRBL OB-2 cable assembly bases.
SG1100-B
AM/FM radio receive antenna - 900mm
The SG1100-B is perfect for mounting to a vehicle bull bar, it will significantly improve your AM and FM radio reception while travelling. Mounting of the barrel spring using a 12.4mm hole and the 1/2" Bolt supplied. The SG1100-B is matching in appearance to the SGDB-B and SG477-B. An all-black SG1100-BLKR version ...
SG1100-BLKR
All-black AM/FM radio receive antenna, receive only - 900mm
The SG1100-BLKR all-black AM/FM receive antenna is perfect for mounting to a vehicle or structure, it will significantly improve your AM and FM radio reception while travelling. Mount using a minimum 13mm hole or bracket with 13mm hole.
SG1100-W
AM/FM radio receive antenna - 900mm
The SG1100-W is perfect for mounting to a vehicle bull bar, it will significantly improve your AM and FM radio reception while travelling. Mounting of the barrel spring using a 12.4mm hole and the 1/2" Bolt supplied. The SG1100-W is matching in appearance to the SGDB-W and SG477-W
SGL1100-B
AM/FM radio receive lightweight antenna - 750mm
The SGL1100-B is the lightweight version of the SG1100-B, it will significantly improve your AM and FM radio reception while travelling. Mounting of the parallel spring using a 16mm hole. The SGL1100-B is matching in appearance to the SGLDB-B and SGL477-B. An all black SGL1100-BLKR with a black radome, spring and ...
SGL1100-BLKR
All-black AM/FM radio receive lightweight antenna, receive only - 750mm
The SGL1100-BLKR all black antenna is the new lightweight version of the SG1100-BLKR, it will significantly improve your AM and FM radio reception while travelling. Mount using a 16mm hole or bracket with a 16mm hole
SGL1100-W
AM/FM Radio Receive Lightweight Antenna - 750mm
The SGL1100-W is the lightweight version of the SG1100-W, it will significantly improve your AM and FM radio reception while travelling. Mounting of the parallel spring using a 16mm hole. The SGL1100-W is matching in appearance to the SGLDB-W and SGL477-W An all-black SGL1100-BLKR version is also available.
ZN3-AMFM-10B
AM/FM radio receive medium-duty detachable antenna - 1.1m
The detachable design of the ZN3-AMFM-10B allows for removal when not in use, or when vandalism may occur. Coming standard with a barrel spring with 5 metres worth of cable and a solderless car radio supplied, the ZN3-AMFM-10B is the ideal solution to boost your AM/FM radio receive while travelling.
ZN3-AMFM-10W
AM/FM radio receive medium-duty detachable antenna - 1.1m
The detachable design of the ZN3-AMFM-10W allows for removal when not in use, or when vandalism may occur. Coming standard with a barrel spring with 5 metres worth of cable and a solderless car radio supplied, the ZN3-AMFM-10W is the ideal solution to boost your AM/FM radio receive while travelling.
ZN3-AMFM-11B
AM/FM radio receive heavy-duty detachable antenna - 1.2m
The heavy duty detachable design of the ZN3-AMFM-11B allows for removal when not in use, or when vandalism may occur. Coming standard with a barrel spring with 5 metres worth of cable and a solderless car radio supplied, the ZN3-AMFM-11B is the ideal solution to boost your AM/FM radio receive while travelling.
ZN3-AMFM-11W
AM/FM radio receive heavy-duty detachable antenna - 1.2m
The heavy duty detachable design of the ZN3-AMFM-11W allows for removal when not in use, or when vandalism may occur. Coming standard with a barrel spring with 5 metres worth of cable and a solderless car radio supplied, the ZN3-AMFM-11W is the ideal solution to boost your AM/FM radio receive while travelling.
ZN3-AMFM-12B
AM/FM radio receive super heavy-duty detachable antenna - 2.1m
The super heavy duty detachable design of the ZN3-AMFM-12B allows for removal when not in use, or when vandalism may occur. Coming standard with a barrel spring with 5 metres worth of cable and a solderless car radio supplied, the ZN3-AMFM-12B is the ideal solution to boost your AM/FM radio receive while travelling.
ZN3-AMFM-12W
AM/FM radio receive super heavy-duty detachable antenna - 2.1m
The super heavy duty detachable design of the ZN3-AMFM-12W allows for removal when not in use, or when vandalism may occur. Coming standard with a barrel spring with 5 metres worth of cable and a solderless car radio supplied, the ZN3-AMFM-12W is the ideal solution to boost your AM/FM radio receive while travelling.
ZN3-AMFM-1962
AM/FM radio receive detachable whip antenna - 1.83m
When a detachable radome antenna is not ideal due to harsh terrain, a fibreglass wound whip is the best alternative. The ZN3-AMFM-1962 comes standard with a 1.5 metre fibreglass wound whip atop a ground independent base. A solderless radio connector is supplied for ease of installation.
ZN3-AMFM-1962-HD
AM/FM Radio Receive Heavy Duty Whip Antenna - 2.0m
When a detachable radome antenna is not ideal due to harsh terrain, a heavy duty fibreglass wound whip is the best alternative. The ZN3-AMFM-1962-HD comes standard with a 1.8 metre heavy duty fibreglass wound whip atop a ground independent base. A solderless radio connector is supplied for ease of installation.
AM-FMRX-RDW
Highly flexible AM/FM radio receive whip and base, receive only - 400mm
The AM-FMRX-RDW is suitable for AM/FM radio receive in locations where damage of a normal whip or collinear will occur. The helical design allows the whip to bend in all directions and return to a vertical polarisation. ZCG recommend mounting the AM-FMRX-RDW as high on your vehicle or structure as possible using the ...
CR36
AM/FM radio receive whip and OB base - 1.0m
To boost AM and FM radio reception while travelling, the CR36 fibreglass whip offers superb performance in a light weight design. Coming standard with 4.0 metres of cable and a solderless radio connector supplied, the 1.0 metre CR36 is the ideal solution for mounting on your vehicle or structure for AM/FM radio ...
CR66
AM/FM radio receive medium-duty whip antenna - 1.5m
To boost AM and FM radio reception while travelling, the CR66 medium duty fibreglass whip offers superb performance in a light weight design. Coming standard with 4.0 metres of cable and a solderless radio connector supplied, the 1.5 metre CR66 is the ideal solution for mounting on your vehicle or structure for AM/FM ...
CR66-HD
AM/FM radio receive heavy-duty whip and OB base - 1.83m
To boost AM and FM radio reception while travelling, the CR66-HD heavy-duty fibreglass whip offers superb performance in a robust lightweight design. Coming standard with 4.0 metres of cable and a solderless radio connector fitted, the 1.83 metre CR66-HD is the ideal solution for mounting on your vehicle or structure ...
CR66-HD-TPM
AM/FM receive heavy-duty whip only - 1.83m
To boost AM and FM radio reception for heavy duty vehicles then the CR66-HD-TPM is your ideal solution, it comes standard with a 5/16"-26 Brass thread.
CR66-TPM
AM/FM Radio Receive Whip - 1.5m
To boost AM and FM radio reception whilst travelling, the CR66-TPM whip comes standard with a 5/16"-26 Brass thread.
SM39-DAB
Multiband AM/FM, DAB+ Radio and Digital TV Receive Whip Antenna - 850mm
For AM/FM, DAB+ Radio and Digital TV receive the SM39-DAB fibreglass wound whip is the ideal solution. Coming standard with a 4.7 metre cable and a Solderless radio connector supplied, the SM39-DAB is the ideal solution for AM/FM, DAB+ Radio and Digital TV receive while travelling.
Z1575
Omni-directional GPS collinear, 1575.42MHz, 8dBi - 880mm
The Z1575 is an omnidirectional ground independent GPS collinear suitable for use within the UHF 1575.42MHz either in a fixed position or vehicle mounted using the appropriate mounting hardware.
CT150
Satellite communications and GPS low profile radome enclosed antenna, 150MHz & 1575.25MHz - 610mm
The CT150 low profile satellite communications and GPS antenna is the ideal solution for situations where a traditional whip would be vulnerable to damage or vandalism or a low profile is required.
ZAU-3C2M-GC
Telstra 3G & GPS low profile antenna, 825-890MHz & 1575.42MHz - 64.5mm
For Automatic Vehicle Location (A.V.L.) systems, an all-in-one mobile phone improvement and GPS low profile antenna is the ideal solution. The ZAU-3C2M-GC delivers a highly sensitive multiband solution for fleet management.
ZAU-3S5M-GC
Telstra, Optus & Vodafone 4G, 3G & GSM, GPS/GPRS low profile antenna, - 64.5mm
For Automatic Vehicle Location (A.V.L.) systems, an all-in-one mobile phone improvement and GPS low profile antenna is the ideal solution. The ZAU-3S5M-GC delivers a highly sensitive multiband solution for fleet management.
ZAU-9-LTE
Low Profile Multiple frequency designed antenna
This low profile antenna can be used for GPS, Wi-Fi and LTE cellular applications, for tracking and data aquisition.
ZAU-GPSWL-5
Low Profile Multiple frequency designed antenna
This low profile antenna can be used for GPS, Wi-Fi and LTE cellular applications, for tracking and data aquisition.
ZAW-9-LTE
GPS, mobile phone/LTE & WiFi multiband low profile antenna - 85mm
This low profile antenna can be used for GPS, Wi-Fi and mobile phone improvement applications, for tracking and data aquisition. Telstra, Optus and Vodafone 4GX, 3G, NextG and GSM networks are all covered by this low profile antenna.
ZGPS-FM
GPS low profile patch antenna, magnetic mount, 1575.42MHz, Fakra blue - 46mm
The ZGPS-FM low profile GPS antenna is compact with an internal low noise amplifier to receive very weak signals, suitable for AVL fleet management or GPS tracking. The magnetic mounting allows for easy install and long term attachment. Versions with SMA Male or SMC Male are available.
ZGPS-SAM
GPS low profile patch antenna, magnetic mount, 1575.42MHz, SMA male - 46mm
The ZGPS-SAM low profile GPS antenna is compact with an internal low noise amplifier to receive very weak signals, suitable for AVL fleet management or GPS tracking. The magnetic mounting allows for easy install and removal when not in use or to transfer to a different vehicle meaning not holes need to be drilled. ...
ZGPS-SCM
GPS low profile patch antenna, magnetic mount, 1575.42MHz, SMC Male - 46mm
The ZGPS-SCM low profile GPS antenna is compact with an internal low noise amplifier to receive very weak signals, suitable for A.V.L. fleet management or GPS tracking. The magnetic mounting allows for easy install and removal when not in use or to transfer to a different vehicle meaning not holes need to be drilled. ...
ZAU-DS-28-FAKRA
GPS Puck antenna
For Automatic Vehicle Location (AVL) systems in a compact construction, the ZAU series deliver a highly sensitive multiband solution for fleet management, vehicle navigation, aviation and military applications
ZAU-GPS
GPS on glass
ZAU-SM-76G
Low Profile GPS/GLONASS Patch Antenna - 1575.42MHz
For Automatic Vehicle Location (AVL) systems in a compact construction, the ZAU series deliver a highly sensitive low profile solution for fleet management, vehicle navigation, aviation and military applications.
ZGPS-FA
GPS low profile patch antenna, adhesive mount, 1575.42MHz, Fakra blue - 46mm
The ZGPS-FA low profile GPS antenna is compact with an internal low noise amplifier to receive very weak signals, suitable for AVL fleet management or GPS tracking. The adhesive mounting allows for easy peel-and-stick install and long term adhesion. Versions with SMA male or SMC male available.
ZGPS-SAA
GPS low profile patch antenna, adhesive mount, 1575.42MHz, SMA male - 46mm
The ZGPS-SAA low profile GPS antenna is compact with an internal low noise amplifier to receive very weak signals, suitable for AVL fleet management or GPS tracking. The adhesive mounting allows for easy peel-and-stick install and long term adhesion. Versions with SMC Male or Fakra blue are available
ZGPS-SCA
GPS low profile patch antenna, adhesive mount, 1575.42MHz, SMC Male - 46mm
The ZGPS-SCA low profile GPS antenna is compact with an internal low noise amplifier to receive very weak signals, suitable for AVL fleet management or GPS tracking. The adhesive mounting allows for easy peel-and-stick install and long term adhesion. Versions with SMA Male or Fakra Blue are available.
OB-4.7-75
AM/FM 75 ohm base and lead
The OB-4.7-75 is a 75 Ohm car radio base , and can be used with a 1052-2 whip for AM/FM reception.
GIDM-800
3G ground independent mobile phone antenna, 825-890MHz, 2.1dBi - 220mm
The GIDM-800 is a ground independent mobile phone antenna. Coming standard at 2.1dBi gain and a power handling of 5 Watts, a 4.5 metre cable with an FME female connector fitted. Mount using a 16mm hole or an appropriate bracket with 16mm hole.
 Ground Independent GSM Cellular Antenna 890-960MHz.jpg)
GID-M90T-GSM
Ground independet Optus & Vodafone 3G antenna, 890-960MHz, 2.1dBi - 450mm
The GID-M90T GSM ground independent antenna is suitable for the Telstra, Optus and Vodafone GSM mobile phone and wireless data network. Coming standard with 5.1dBi gain, a 5W power handling and a 4.5 metre cable fitted with a FME female, mount using a 16mm hole or bracket.
-SS Ground Independent Telstra Next G Antenna.jpg)
GID-M90T-NextG-SS
Ground independent Telstra 3G antenna, 825-890MHz, 5.2dBi - 450mm
The GID-M90T-NextG ground independent Telstra 3G antenna is useful for mobile phone or wireless data improvement, telemetry and monitoring applications within 825-890MHz. These models offer a modest size and will deliver excellent performance. ZCG recommend mounting the GID-M90T-NextG-SS as high as possible on your ...
GIDM-DB
Ground Independent Telstra, Optus & Vodafone 3G & GSM Mobile Phone Antenna - 825-960MHz
The GIDM-DB is a ground independent, dual band Telstra, Optus and Vodafone 3G and GSM mobile phone antenna. Coming standard at 2.1dBi gain and a power handling of 5 Watts, a 4.5 metre cable with an FME female connector fitted. Mount using a 16mm hole or an appropriate bracket with 16mm hole.
CT800
Telstra 3G low profile antenna, 825-890MHz - 150mm
If you require a Telstra 3G mobile phone antenna which is small, inconspicuous and virtually indestructable, then the CT800 is your ideal solution. Coming standard with 2.1dBi gain ,a power handling of 5 Watts, a N-type Female protuding through the base and 2 x 6mm mounting holes the CT800 is the ideal low profile ...
CT900
Telstra, Optus & Vodafone GSM low profile antenna, 890-960MHz - 150mm
If you require a Telstra, Optus and Vodafone GSM mobile phone antenna which is small, inconspicuous and virtually indestructable, then the CT900 is your ideal solution. Coming standard with 2.1dBi gain ,a power handling of 5 Watts, a N-type Female protuding through the base. Please note: this antenna requires a ...
GCRFA
Mobile phone, GPS & WiFi low profile antenna, 4G, 3G, GSM, WiFi & GPS - 150mm
The GCRFA is an all-in-one low profile antenna covering Telstra, Optus and Vodafone 4G, 3G and GSM mobile phone networks as well as GPS 1575.75MHz and WiFi 2.4GHz. 3 cable assemblies exit the bottom with SMA males fitted to each, a power rating of 25 Watts and gain of 4dBic on a 7cm x 7cm ground plane. Mount the GCRFA ...
GCT
Dualband low profile antenna, 4G, 3G, GSM and GPS - 100mm
The GCT is an all-in-one low profile antenna covering Telstra, Optus and Vodafone 4G, 3G (NextG) and GSM mobile phone networks as well as GPS 1575.75MHz. 2 cable assemblies exit the bottom with SMA males fitted to each, a power rating of 25 Watts and gain of 4dBic on a 7cm x 7cm ground plane. Mount the GCT in a 20mm ...
GCT-22364
Low Profile Telstra, Optus & Vodafone 4G, 3G & GSM Antenna - 39mm
The GCT-22364 is an all-in-one low profile antenna covering Telstra, Optus and Vodafone 4G, 3G and GSM mobile phone networks. Coming standard with a 1.5m cable that bottom exits with a SMA male fitted, a power rating of 25 Watts and gain of 4dBic on a 7cm x 7cm ground plane. Mount the GCT-22364 in a 20mm hole or ...
ZCG-EEH-L01
Low Profile Telstra, Optus, Vodafone 4GX, 4G, 3G & GSM mobile phone antenna - 75.6mm
To cover all of the Mobile phone and wireless data networks within Australia, the ZCG-EEH-L01 is your ideal solution, covering Telstra, Optus and Vodafone 4G LTE (4GX), 4G, 3G & GSM in a low profile sealed construction. Coming standard with a N-Type Female bulkhead at the base that doubles as the mounting section with ...
MAG-CELL-DB
Magnetic Base Telstra 4G & 3G Antenna - 825-890 & 1750-2170MHz
The MAG-CELL-DB magnetic base mobile phone antenna is designed to improve mobile phone and wireless data coverage on the Telstra 4G & 3G networks. Standard with a FME male inside the magnetic base with 3.1dBi gain and a power handling of 5 Watts the MAG-CELL-DB is suitable for temporary or permanent mobile phone or ...
MAG-CELL-DB-2
Magnetic Base Telstra 4G & 3G Antenna - 825-890 & 1750-2170MHz
The MAG-CELL-DB-2 magnetic base mobile phone antenna is designed to improve mobile phone and wireless data coverage on the Telstra 4G & 3G networks. Standard with a 2 metre cable with a FME female and fitted with 3.1dBi gain and a power handling of 5 Watts the MAG-CELL-DB-2 is suitable for temporary or permanent ...
MAG-M70T700
Magnetic base Telstra 3G Detachable Antenna - 700-730MHz
The MAGM90T800 magnetic base detachable mobile phone antenna is designed for the Telstra , 700-730MHz to improve mobile phone or wireless data in your vehicle, caravan, home or office. Standard with a 5.0 metre cable with a N Male fitted, the power handling of 5 Watts and gain performance of 5dBi. Suitable for ...
MAG-M90T800
Magnetic base Telstra 3G Detachable Antenna - 825-890MHz
The MAGM90T800 magnetic base detachable mobile phone antenna is designed for the Telstra 3G network 825-890MHz to improve mobile phone or wireless data in your vehicle, caravan, home or office. Standard with a 3.0 metre cable with a FME Female and SMA Male fitted, the power handling of 5 Watts and gain performance of ...
MAG-M90T900
Magnetic base Optus, Vodafone 3G & GSM Detachable Antenna - 890-960MHz
The MAG-M90T900 magnetic base detachable mobile phone antenna is designed for the Optus & Vodafone 3G and Telstra, Optus and Vodafone network 825-890MHz to improve mobile phone or wireless data in your vehicle, caravan, home or office. Standard with a 3.0 metre cable with a FME Female and SMA Male fitted, the power ...
OG800
On-glass Telstra, Optus & Vodafone 3G & GSM antenna - 825-960MHz
Small and unobtrusive, an on-glass cellular antenna is a popular alternative to other bracket mounted antennas. The OG835 on-glass antenna covers the full Telstra, Optus and Vodafone 3G & GSM mobile phone and wireless data range 825-960MHz with 7.2dBi gain and 5 Watts power handling. Standard with a 4.3 metre cable ...
OG835
On-glass Telstra, Optus & Vodafone 3G antenna, 825-960MHz, 7.2dBi - 396mm
Small and unobtrusive, an on-glass cellular antenna is a popular alternative to other bracket mounted antennas. The OG835 on-glass antenna covers the full Telstra Next G and Optus & Vodafone 3G mobile phone and wireless data range 825-960MHz with 7.2dBi gain and 5 Watts power handling. Standard with a 4.3 metre cable ...
OG8-TB
On-Glass Telstra, Optus & Vodafone 4G, 3G & GSM Mobile Phone Antenna - 825-890 & 1710-2170MHz
Small and unobtrusive, an on-glass cellular antenna is a popular alternative to other bracket mounted antennas. The OG8-TB on-glass tri-band antenna covers the full Telstra, Optus and Vodafone 4G, 3G & GSM mobile phone and wireless data range 825-960MHz & 1710-2170MHz with 5.1dBi gain and 5 Watts power handling. ...
OGI-08-4
On-glass interior Telstra, Optus & Vodafone 4G, 3G & GSM Mobile Phone Antenna
This OGI-08-4 on-glass antenna is designed to adhesive mount to the interior of a vehicle windscreen, suitable for mobile phone or wireless data improvement across the Telstra, Optus and Vodafone 4G, 3G & GSM networks. Standard with a 3.0 metre cable with a SMA Male fitted, a SMA female to FME female adaptor supplied ...
OGI-EPH401
On-glass Telstra, Optus & Vodafone 4G and 3G antenna, 1.5dBi - 106.5mm
This OGI-EPH401 on-glass antenna is designed to adhesive mount to the interior of a vehicle windscreen, suitable for mobile phone or wireless data improvement across the Telstra, Optus and Vodafone 4G and 3G networks. Standard with a 5.0 metre cable with a Fakra Type D Plum for ease of connection to your device. Gain ...
M90T(GSM)
Phased Coil Optus & Vodafone 3G and GSM Mobile Phone Whip - 890-960MHz
The M90T GSM black stainless steel whip is suitable for mounting onto any 6mm thread or existing GID-M90T GSM mobile phone antenna for mobile phone or wireless data improvement for Optus and Vodafone 3G and Telstra, Optus and Vodafone GSM 890-960MHz. Maximum power rating is 25 Watts and gain performance of 5.1dBi. ...
 Black NextG Cellular Phased Whip 825-890MHz.jpg)
M90T(Next G)
Phased Coil Telstra 3G Mobile Phone Whip - 825-890MHz
The M90T Next G black stainless steel phased coil whip is suitable for mounting onto any 6mm thread or existing GID-M90T Next G mobile phone whip for mobile phone or wireless data improvement for Telstra 3G 825-890MHz. Maximum power rating is 25 Watts and gain performance of 5.1dBi. Suitable for mobile phone or ...
SG700-4GX
4G LTE & 3G super gain collinear, 718-788 & 820-890MHz, 5.1dBi - 1.1m
The SG700-4GX super gain 4G LTE and 3G (Next G) antenna is designed for both mobile phone and wireless data improvement in the new 718-788MHz Telstra 4GX/ Optus 4G PLus and Vodafone 4G LTE frequency range. The SG700-4GX antenna also works up in the Telstra 3G (Next G) 820-890MHz range.
SGDB-B
Super Gain Telstra, Optus & Vodafone 4G, 3G & GSM Mobile Phone Antenna
The benchmark for all mobile phone antenna the SGDB-B super gain dual band covers Telstra, Optus and Vodafone 4G, 3G & GSM for all mobile phone and wireless data applications. Coming standard with 5.0 metres of cable with a FME female fitted rated for 30 Watts and a gain performance of 6.2dBi at 825-960MHz and 3dBi at ...
SGDB-BLKR
Super gain Telstra, Optus & Vodafone 4G, 3G & GSM mobile phone antenna - 900mm
The benchmark for all mobile phone antenna the all-black SGDB-BLKR super gain dual band antenna that covers Telstra, Optus and Vodafone 4G, 3G (NextG) & GSM for mobile phone improvement and wireless data applications. Suitable for mounting on your vehicle, caravan or at your home or office, the SGDB-BLKR is the only ...
SGDB-BR
Super gain Telstra, Optus & Vodafone 4G, 3G & GSM Mobile Phone Antenna
The benchmark for all mobile phone antenna the SGDB-BR super gain dual band covers Telstra, Optus and Vodafone 4G, 3G & GSM for all mobile phone and wireless data applications. Coming standard with 5.0 metres of cable with a FME female fitted rated for 30 Watts and a gain performance of 6.2dBi at 825-960MHz and 3dBi ...
SGDB-W
Super Gain Telstra, Optus & Vodafone 4G, 3G & GSM Mobile Phone Antenna
The benchmark for all mobile phone antenna the SGDB-B super gain dual band covers Telstra, Optus and Vodafone 4G, 3G & GSM for all mobile phone and wireless data applications. Coming standard with 5.0 metres of cable with a FME female fitted rated for 30 Watts and a gain performance of 6.2dBi at 825-960MHz and 3dBi at ...
SGL2000-B
Super gain Telstra, Optus & Vodafone 3G upper mobile phone antenna, 1920-2170MHz , 6.2dBi - 480mm
The SGL2000-B offers robust reliability, maximum efficiency and performance for when Telstra, Optus & Vodafone upper 3G network is poor. The SGL2000-B comes standard with a 5.0 metre cable with a FME female supplied, not fitted. Gain figures of 6.2dBi across the entire band with a power handling of 30 Watts. Mount the ...
SGL2000-W
Telstra, Optus & Vodafone 3G upper mobile phone antenna, 1920-2170MHz, 6.2dBi - 480mm
The SGL2000-W offers robust reliability, maximum efficiency and performance for when Telstra, Optus & Vodafone upper 3G network is poor. The SGL2000-W comes standard with a 5.0 metre cable with a FME supplied not fitted. Gain figures of 6.2dBi across the entire band with a power handling of 30 Watts. Mount the antenna ...
SGLDB-B
Super Gain Lightweight Telstra, Optus & Vodafone 4G, 3G & GSM Mobile Phone Antenna
The SGLDB-B is the lightweight Telstra, Optus and Vodafone 4G, 3G & GSM mobile phone antenna. The SGLDB-B comes standard with a 5.0 metre cable with a FME Female fitted it is also matching in peformance with the SGDB series of antennas with gain performance of 6.2dBi at 825-960MHz and 3dBi at 1710-2190MHz and a ...
.jpg)
SGLDB-BLKR
All-black super gain lightweight Telstra, Optus & Vodafone 4G, 3G & GSM mobile phone antenna - 750mm
The SGLDB-B is the lightweight Telstra, Optus and Vodafone 4G, 3G & GSM mobile phone antenna. The SGLDB-B comes standard with a 5.0 metre cable with a FME Female fitted it is also matching in peformance with the SGDB series of antennas with gain performance of 6.2dBi at 825-960MHz and 3dBi at 1710-2190MHz and a ...
SGLDB-DT
Detachable Telstra, Optus & Vodafone 4G & 3G antenna , 6.2dBi - 800mm
The new ZCG Scalar detachable collinear mobile phone antenna is designed along the lines of the ZN3 range of detachable antennas.
SGLDB-G
Super Gain Lightweight Telstra, Optus & Vodafone 4G, 3G & GSM Mobile Phone Antenna
The SGLDB-G is the lightweight Telstra, Optus and Vodafone 4G, 3G & GSM mobile phone antenna. The SGLDB-G comes standard with a 5.0 metre cable with a FME Female fitted it is also matching in peformance with the SGDB series of antennas with gain performance of 6.2dBi at 825-960MHz and 3dBi at 1710-2190MHz and a ...
SGLDB-W
Super Gain Lightweight Telstra, Optus & Vodafone 4G, 3G & GSM Mobile Phone Antenna
The SGLDB-W is the lightweight Telstra, Optus and Vodafone 4G, 3G & GSM mobile phone antenna. The SGLDB-W comes standard with a 5.0 metre cable with a FME Female fitted it is also matching in peformance with the SGDB series of antennas with gain performance of 6.2dBi at 825-960MHz and 3dBi at 1710-2190MHz and a ...
TC1600-A
Max Gain Telstra 3G Mobile Phone/Wireless Data Antenna - 820-890MHz
For a max gain vehicle mount mobile phone/wireless data antenna the TC1600-A are the ideal solution, offering the maximum gain and reception range practical in a broadband vehicle mounted mobile phone/wireless data antenna.
ZIR-1626-RC
Satellite Phone Communications Antenna - 1616-1626MHz
The ZIR-1626-RC is specifcally designed and manufactured for the satellite phone communication applications.
ZIR-1626-RC-10
Satellite Phone Communications Antenna - 1616-1626MHz
The ZIR-1626-RC is specifcally designed and manufactured for the satellite phone communication applications.
ZN3-2000
Optus 3G Detachable Mobile Phone Antenna - 1920-2170MHz
The ZN3-2000 is specifically designed for the Optus 3G mobile phone and wireless data network, and offers consistent and dependable performance with maximum efficiency, particularly where signal strength is poor. The detachable design allows for removal of the radiating antenna top when the possiblility of damage or ...
ZN3-SGDB-11B
Detachable Telstra, Optus & Vodafone 4G, 3G & GSM Vehicle Mount Mobile Phone Antenna
The detachable design of the ZN3-SGDB-11B allows for removal of the radiating antenna in situations where damage or vandalism may occur, or when not in use. The ZN3-SGDB-11B covers the entire Telstra, Optus & Vodafone 4G, 3G & GSM networks for mobile phone and wireless data improvement either mounted on your vehicle ...
ZN3-SGDB-11W
Detachable Telstra, Optus & Vodafone 4G, 3G & GSM Vehicle Mount Mobile Phone Antenna
The detachable design of the ZN3-SGDB-11W allows for removal of the radiating antenna in situations where damage or vandalism may occur, or when not in use. The ZN3-SGDB-11W covers the entire Telstra, Optus & Vodafone 4G, 3G & GSM networks for mobile phone and wireless data improvement either mounted on your vehicle ...
ATLM-B
Vehicle Mounting Adjustable Tilt Mount Bracket - lip of bonnet
The ATLM-B adjustable tilt mounting bracket is suitable for mounting any antenna that requires a 17mm hole onto the lip of your bonnet or boot. The ATLM-B allows for one directional adjustment with a secure locking mechanism to ensure your antenna stay in the optimum vertical position.
ATLM-CH
Vehicle Mounting Adjustable Tilt Mount Bracket - lip of bonnet
The ATLM-B adjustable tilt mounting bracket is suitable for mounting any antenna that requires a 17mm hole onto the lip of your bonnet or boot. The ATLM-B allows for one directional adjustment with a secure locking mechanism to ensure your antenna stay in the optimum vertical position.
BBML-SS
Bullbar Wrap-Around Vehicle Mount, Stainless Steel - Up to 65mm
The BBML-SS large bullbar wrap around mount is suitable for any circular bullbar with a diameter of up to 65mm. The robust stainless steel components will ensure your antenna stays at the optimum vertical polarisation no matter the conditions.
BBM-SS
Bullbar Wrap-Around Vehicle Mount, Stainless Steel - Up to 50mm
The BBM-SS bullbar wrap around mount is suitable for any bullbar support with a diameter of up to 50mm. The robust stainless steel components will ensure your antenna stays at the optimum vertical polarisation no matter the conditions.
BBMXL-SS
Bullbar Wrap-Around Vehicle Mount, Stainless Steel - Up-to 76mm
The BBMXL-SS extra large bullbar wrap around mount is suitable for any bullbar support with a diameter of up to 76mm. The robust stainless steel components will ensure your antenna stays at the optimum vertical polarisation no matter the conditions.
GM1
Bonnet or Boot 'L' Mount Bracket, Stainless Steel - 16mm hole
The GM1 stainless steel 'L' vehicle mount or fascia mount bracket is suited for any antenna that requires a 16mm hole. The GM1 is suitable for mounting either in bonnet or boot locations or fascia or vertical surface mounting using the 4.5mm holes.
GM2
Mudguard 'Z' Mounting Bracket, Stainless Steel - 16mm hole
The GM2 mudguard 'Z' mount bracket is suited for any antenna that requires a 16mm hole. To install the GM2 use the 2 x 4.5mm installation holes on the bottom of the bracket. Ensure the placement of your bracket allows your antennas cable assembly to route through your vehicle or structure with minimal strain.
GM4
Mudguard 'Z' Mount Bracket, Black Stainless Steel - 16mm hole
The GM4 mudguard 'Z' mount bracket is suited for any antenna that requires a 16mm hole. To install the GM4 use the 11.5mm installation hole on the bottom of the bracket or 2 x 4.5mm holes on the side of the bracket. Ensure the placement of your bracket allows your antennas cable assembly to route through your vehicle ...
GM5
Vehicle or Fascia Slotted 'L' Mount Bracket - 13mm Slot
The GM5 vehicle mount or fascia mount bracket is suited for any antenna that requires a 13mm slot or hole. The GM5 slotted bracket allows for quick installation and removal for a lightweight stud mount antenna. Mount the GM5 using the 3 x 4.5mm holes located on the side of the bracket.
GM6
Vehicle or Fascia Slotted 'L' Mount Bracket, Stainless Steel - 16mm Slot
The GM6 vehicle mount or fascia mount bracket is suited for any antenna that requires a 16mm slot or hole. The GM6 slotted bracket allows for quick installation and removal for a lightweight stud mount antenna. Mount the GM6 using the 3 x 4.5mm holes located on the side of the bracket.
MRM-SS
Mirror mount clamp bracket, stainless steel - 16mm hole
The MRM-SS mirror mount clamp mount bracket is suitable for mounting on a vehicle mirror or horizontal mounting pole with a maximum 20mm diameter. Mounting of the MRM-SS is using the 2 x mounting plates supplied with the 4 x M6 stainless steel bolts supplied. Ensure the bracket is mounted as high on your vehicle as ...
CRBL
AM/FM OB Base Cable Assembly - 4.0m RG58A/U
The CRBL AM/FM OB base cable assembly is suited for the AM/FM range of fibreglass whips such as the CR36-TPM and CR66-TPM. The CRBL comes standard with 4.0 metres RG58A/U stranded bottom exiting from the OB Base and a car radio connector fitted for ease of installation. Mounting the CRBL requires a 16mm hole or ...
CRBL-6
AM/FM OB Base Cable Assembly - 6.0m RG58A/U
The CRBL-6 AM/FM OB base cable assembly is suited for the AM/FM range of fibreglass whips such as the CR36-TPM and CR66-TPM. The CRBL comes standard with 6 metres RG58A/U stranded bottom exiting from the OB Base and a car radio connector fitted for ease of installation. Mounting the CRBL-6 requires a 16mm hole or ...
OB-2
Australian Standard OB Base, Black - 5/16"-26 TPI Male Thread
The OB-2 is the Australian standard black OB base assembly. Coming standard with a 5/16"-26TPI male thread suitable for any whips with a 5/16"-26TPI female thread. The OB-2 is only the OB Base assembly with no coaxial cable or connectors, they will be required to be ordered seperately. Mounting an OB-2 base requires a ...
OB-4.7
Australian Standard OB Base Cable Assembly - 4.7m MIL-SPEC RG58A/U
The OB-4.7 Australian standard OB base assembly suits any whip with a 5/16"-26TPI female thread in the mounting ferrule such as the ZN1-77 Series. Mounting the OB-4.7 requires a 16mm hole or appropriate bracket with 16mm hole.
OB-4.7-W
Australian Standard OB Base Cable Assembly, White - 4.7m RG58A/U Stranded
The OB-4.7-W Australian standard white OB base assembly suits any whip with a 5/16"-26TPI female thread in the mounting ferrule such as the ZN1-77 Series. Mounting the OB-4.7-W requires a 16mm hole or appropriate bracket with 16mm hole.
RA-4.7
Right-Angle UHF Female Cable Assembly - 4.7 metres RG58L/L
Suitable for mounting any antenna with a UHF Male termination such as the GID-400-QF series or GRH-TPM in either a vehicle mount or fixed position location. Standard with 4.7 metres MIL-SPEC RG58A/U stranded and a UHF Male PL259 solderless connector supplied not fitted. Mounting the RA-4.7 requires a minimum 16mm hole ...
RA-6.0
Right-Angle UHF Female Cable Assembly - 6 metres RG58L/L
Suitable for mounting any antenna with a UHF Male termination such as the GID-400-QF series or GRH-TPM in either a vehicle mount or fixed position location. Standard with 6.0 metres MIL-SPEC RG58A/U stranded and a BNC/STI male connector supplied not fitted. Mounting the RA-6.0 requires a minimum 16mm hole or ...
XB Base Assy
XB base Assembly, black - 6mm thread
The XB Base Assy is the come standard with a 6mm male thread suitable for any whips with a 6mm female thread. The XB Base Assy is only the XB Base assembly with no coaxial cable or connectors, they will be required to be ordered seperately. Mounting an XB Base Assy base requires a 16mm holes or appropriate bracket ...
XB-4.7
XB Base Cable Assembly, Black - 4.7m RG58L/L
The XB-4.7 XB base assembly suits any whip with a 6mm female thread in the mounting ferrule such as the M11T or M21T whip. Mounting the XB-4.7 requires a 16mm hole or appropriate bracket with 16mm hole.
ZN3-SB-L
ZN3 Series UHF Connector Spring Base, Large
The ZN3-SB-L large spring and cable assembly is a suitable replacement base for all ZN3-11 and ZN3-12 series of UHF, AMFM or Mobile Phone detachable antennas. For the AM/FM or Mobile Phone antennas an alternative connector will need to be requested when ordering, for AM/FM a solderless car radio connector will be ...
ZN3-SB-S
ZN3 Series UHF Connector Spring Base, Small
The ZN3-SB-S small spring and cable assembly is a suitable replacement base for all ZN3-10 series of UHF or AMFM detachable antennas. For the AM/FM antennas a solderless car radio connector can be ordered seperately. To Mount the ZN3-SB-L you will require a 13mm hole or appropriate bracket with 13mm hole using the ...
MGB-OB
Magnetic OB Base Cable Assembly - 4.7m RG58A/U
The MGB-OB magnetic base with Australian standard termination is suitable for short or long term installation on any magnetic metal surface. The MGB-OB does not include cable termination, so order required termination seperately. The MGB-OB comes with a paint protecting pad on the base and is suitable for any whip ...
MGB-UHF
Magnetic Mount UHF Connector Cable Assembly - 4.7m RG58A/U
The MGB-UHF magnetic base with UHF Female termination is suitable for short or long term installation on any magnetic metal surface. The MGB-UHF comes with a UHF Male termination supplied not fitted. The MGB-UHF comes with a paint protecting pad on the base and is suitable for any whip with a UHF Male in the base such ...
MGB-XB
Magnetic Base XB Base Cable Assembly - 4.7m RG58A/U
The MGB-XB magnetic base with XB base termination is suitable for short or long term installation on any magnetic metal surface. The MGB-XB with no termination fitted, please order seperately to suit your requirements. The MGB-XB comes with a paint protecting pad on the base and is suitable for any whip with a 6mm ...
1269
Heavy Duty 'Barrel' Spring Base, Stainless steel - 1/2"-12 BSW Bolt
The 1269 stainless steel heavy duty 'barrel' spring is suitable for all SG series of 477MHz, AM/FM or mobile phone vehicle mounted antennas. Mount the 1269 spring using the 1/2" BSW bolt in the base of the spring using a minimum 13mm hole or appropriate bracket.
1269-BLK
Heavy Duty 'Barrel' Spring Base, Stainless steel - 1/2"-12 BSW Bolt
The 1269 stainless steel heavy duty 'barrel' spring is suitable for all SG series of 477MHz, AM/FM or mobile phone vehicle mounted antennas. Mount the 1269 spring using the 1/2" BSW bolt in the base of the spring using a minimum 13mm hole or appropriate bracket.
1270
Heavy Duty Parallel Spring Base - includes 1/2"-12BSW Bolt
The 1270 stainless steel heavy duty 'parallel' spring is suitable for all SG series of 477MHz, AM/FM or mobile phone vehicle mounted antennas. Mount the 1270 spring using the 1/2" BSW bolt in the base of the spring using a minimum 13mm hole or appropriate bracket.
1570
Medium Duty Parallel Spring, Stainless Steel - incl. M10 x 20mm drilled bolt
The 1570 parallel stainless steel spring is suitable for mounting GID-M90T series or GRUFC antennas onto your vehicle or structure that required vibration and the ability to flex if required.
MS Base
VHF & UHF Whip Spring - 5/16"-26TPI male and female threads
The MS Base comes standard with a 5/16"-26 TPI male thread on the top suitable for any VHF or UHF whip with a 5/16"-26 TPI female thread. The base thread of 5/16"-26 TPI female thread is suitable for any base assembly with a male 5/16"-26 TPI thread such as the OB-4.7 or MGB-OB. The spring will reduce vibrations and ...
GID-M410
Ground Independent UHF Elevated Feed Antenna - 400-420MHz
The GID-M410 stainless steel whip elevated feed antenna offers effective performance and good gain all within a lightweight design, suitable for vehicle mounting or fixed position mounting for use in UHF Communications within the 400-420MHz range. This antenna does not come fitted with a dampening spring, this antenna ...
GID-M410-QF
Ground Independent "Quick-Fit" UHF elevated feed antenna, 400-420MHz - 950mm
The "Quick-Fit" design of the GID-M410-QF ground independent UHF elevated feed antenna allows for ease of installation and removal of the antennas when not in use, or possibilities of damage or vandalism may occur. The GID-M410-QF can be mounted onto any existing UHF female base assembly such as the RA-4.7 or MGB-UHF.
GID-M430
Ground Independent UHF Elevated Feed Antenna - 420-440MHz
The GID-M430 stainless steel whip elevated feed antenna offers effective performance and good gain all within a lightweight design, suitable for vehicle mounting or fixed position mounting for use in UHF Communications within the 420-440MHz range. This antenna does not come fitted with a dampening spring, this antenna ...
GID-M430-QF
Ground Independent "Quick-Fit" UHF elevated feed antenna, 420-440MHz - 910mm
The "Quick-Fit" design of the GID-M430-QF ground independent UHF Elevated feed antenna allows for ease of installation and removal of the antennas when not in use, or possibilities of damage or vandalism may occur. The GID-M430-QF can be mounted onto any existing or new UHF female base assembly such as the RA-4.7, ...
GID-M460
Ground Independent UHF Elevated Feed Antenna - 450-470MHz
The GID-M460 stainless steel whip elevated feed antenna offers effective performance and good gain all within a lightweight design, suitable for vehicle mounting or fixed position mounting for use in UHF Communications within the 450-470MHz range. This antenna does not come fitted with a dampening spring, this antenna ...
GID-M460-QF
Ground Independent "Quick-Fit" UHF elevated feed antenna, 450-470MHz - 860mm
The "Quick-Fit" design of the GID-M460-QF ground independent UHF Elevated feed antenna allows for ease of installation and removal of the antennas when not in use, or possibilities of damage or vandalism may occur. The GID-M460-QF can be mounted onto any existing or new UHF female base assembly such as the RA-4.7, ...
GID-M480
Ground Independent UHF Elevated Feed Antenna - 470-490MHz
The GID-M480 ground independent elevated feed UHF antenna offers moderate gain in a lightweight design. These antennas are an excellent choice for vehicle or fixed position mounting in positions where weight bearing is minimal. The recommended mounting of a GID-M480 is into any appropriate bracket with a minimum 10mm ...
GID-M480-QF
Ground Independent "Quick-fit" UHF elevated feed antenna, 470-490MHz - 820mm
The GID480-QF "Quick-fit" ground independent UHF vehicle mount antenna features the detachable design onto a right-angle UHF base such as the RA4.7 or MGB-UHF for UHF communications on vehicle mounted or fixed position locations.
GID-M510
Ground Independent UHF Elevated Feed Antenna - 500-520MHz
The GID series of elevated feed, ground independent mobile antennas offer effective performance with good gain.
GID-M510-QF
Ground Independent "Quick-Fit" UHF elevated feed antenna, 500-520MHz - 800mm
The "Quick-Fit" design of the GID-M510-QF ground independent UHF Elevated feed antenna allows for ease of installation and removal of the antennas when not in use, or possibilities of damage or vandalism may occur. The GID-M510-QF can be mounted onto any existing or new UHF female base assembly such as the RA-4.7, ...
GID-MB430
Ground Independent UHF Fibreglass Whip Elevated Feed antenna - 420-440MHz
The GID-MB430 fibreglass whip elevated feed antenna offers effective performance and good gain all within a lightweight design, suitable for vehicle mounting or fixed position mounting for use in UHF Communications within the 420-440MHz range. This antenna does not come fitted with a dampening spring, this antenna is ...
GID-MB460
Ground Independent UHF Fibreglass Whip Elevated Feed Antenna - 450-470MHz
The GID-MB460 fibreglass whip elevated feed antenna offers effective performance and good gain all within a lightweight design, suitable for vehicle mounting or fixed position mounting for use in UHF Communications within the 450-470MHz range. This antenna does not come fitted with a dampening spring, this antenna is ...
GID-MB480
Ground Independent UHF Fibreglass Whip Elevated Feed antenna - 470-490MHz
The GID-MB480 ground independent elevated feed UHF antenna offers moderate gain in a lightweight design. These antennas are an excellent choice for mounting in positions where weight bearing is required to be minimal such as a vehicle mirror. To mount the GID-MB480 a bracket or hole with a minimum 10mm diameter is ...
M99B-400
UHF Flexible Portable BNC Male Whip - 400-520MHz
The M99B-400 UHF flexible whip is specifically designed to fit to the connection of a portable or vehicle mounted UHF radio with a Female BNC termination. The small and flexible design allows the M99B-400 to withstand the harshest of conditions whilst still maintaining the optimal vertical polarisation.
M99BNC-400
UHF flexible rubber portable whip - 400-520 MHz, BNC male, 50W, 1.8dBi - 160mm
M99BNC-900
UHF Flexible Portable Whip - 900-930MHz
The M99BNC-900 is a flexible whip for wireless data link or NFC (Near Field Communications) within the 900-930MHz range. The M99BNC-900 fits to any base with a BNC female termination. The small and flexible design allows the M99B-400 to withstand the harshest of conditions whilst still maintaining the optimal vertical ...
M99U-400
UHF Flexible Portable UHF Male Whip - 400-520MHz
The M99U-400 UHF flexible whips specifically designed to fit to the connection of a portable or vehicle mounted UHF radio with a UHF Female termination. The small and flexible design allows the M99U-400 to withstand the harshest of conditions whilst still maintaining the optimal vertical polarisation.
MW4052
UHF Flexible SMA Female Whip - 403-520MHz
The MW4052 highly flexible whip is designed to fit onto any portable radio or UHF device with a SMA male connection. The small and flexible design allows the MW4052 to withstand the harshest of conditions whilst still maintaining the optimal vertical polarisation.
MW4547
UHF Flexible SMA Female Whip - 450-470MHz
The MW4547 highly flexible whip is designed to fit onto any portable radio or UHF device with a SMA male connection. The small and flexible design allows the MW4547 to withstand the harshest of conditions whilst still maintaining the optimal vertical polarisation.
TW4052
UHF Flexible Portable SMA Male Whip - 403-520MHz
The TW4052 highly flexible whip is designed to fit onto any portable radio or UHF device with a SMA female connection. The small and flexible design allows the TW4052 to withstand the harshest of conditions whilst still maintaining the optimal vertical polarisation.
ZSMA-350
UHF Flexible Portable SMA Male Whip - 300-400MHz
The ZSMA-350 highly flexible whip is designed to fit onto any portable radio or UHF device with a SMA male connection. The small and flexible design allows the ZSMA-350 to withstand the harshest of conditions whilst still maintaining the optimal vertical polarisation.
ZSMA-435
UHF Flexible Portable SMA Male Whip - 400-470MHz
The ZSMA-435 highly flexible whip is designed to fit onto any portable radio or UHF device with a SMA female connection. The small and flexible design allows the ZSMA-435 to withstand the harshest of conditions whilst still maintaining the optimal vertical polarisation.
ZSMA-905
UHF Flexible Portable SMA Male Whip - 870-940MHz
The ZSMA-905 highly flexible whip is designed to fit onto any portable radio or UHF device with a SMA female connection. The small and flexible design allows the ZSMA-905 to withstand the harshest of conditions whilst still maintaining the optimal vertical polarisation.
CT400
UHF low profile antenna, 400-500MHz, specify frequency band, 2.1dBi - 210mm
The low profile and rugged CT400 UHF low profile antenna is the ideal choice in situations where a traditional whip would be vulnerable to damage or vandalism. Mounting the CT400 will require 4 x 6mm mount holes. The CT400 comes supplied with 4 x M6 x 20mm set screws for mounting.
CT500
UHF low profile ruggedised antenna, 500-600MHz - 200mm
The low profile and rugged CT500 UHF low profile antenna is the ideal choice in situations where a traditional whip would be vulnerable to damage or vandalism. Mounting the CT500 will require 4 x 6mm mount holes, 4 x M6 x 20mm bolts are supplied for mounting.
CT600
UHF low profile ruggedised antenna, 600-700MHz - 160mm
The low profile and rugged CT600 UHF-HB mobile antenna is the ideal choice in situations where a traditional whip would be vulnerable to damage or vandalism. Mounting the CT600 will require 4 x 6mm mount holes, 2 x M6 set screws are required for mounting
CT700
UHF low profile ruggedised antenna, 757-787MHz - 170mm
If you require a mobile phone antenna which is small, inconspicuous and virtually indestructable, then the CT800 is your ideal solution. Coming standard with 2.1dBi gain ,a power handling of 5 Watts, a N-type Female protuding through the base and 2 x 6mm mounting holes the CT800 is the ideal low profile solution for ...
MGB-GP-470
Magnetic ground plane UHF whip, 470MHz, 5m coaxial cable
This magnetic ground plane antenna comes with a flexible UHF 470MHz whip. Suitable for temporary or permanent mounting onto any magnetic surface such as your vehicle or metallic roofed structure. The magnetic base comes fitted with a scratch reduction pad.
MGB-GP-590
Magnetic ground plane UHF whip, 590MHz, 5m coaxial cable
This magnetic ground plane antenna comes with a flexible UHF 590MHz whip. Suitable for temporary or permanent mounting onto any magnetic surface such as your vehicle or metallic roofed structure. The magnetic base comes fitted with a scratch reduction pad.
OZU-1
On-glass UHF adhesive mount antenna - 390-520MHz
A vehicle on-glass antenna is a popular alternative to other bracket mounted antenna. The OZU-1 on-glass UHF antenna is simple to install, just peel, place and connect. There is no connector fitted to the connection end of the cable assembly, order the required connector along with your antenna to suit your needs.
OZU-3
On-glass UHF Adhesive Mount Antenna, 390-520MHz - 230mm
A vehicle on-glass antenna is a popular alternative to other bracket mounted antenna. The OZU-3 on-glass UHF communications is simple to install, just peel, place and connect. There is no connector supplied for the termination end of the cable assembly, order the required connector along with your antenna to suit ...
GRN410-TPM
Ground Independent UHF Flexible Whip, 400-420MHz - 360mm
The GRN410-TPM flexible UHF half wave whip is designed to be robust and reliable, ideal for mining, agricultural or heavy equipment UHF communications, where damage or there is limited space. The GRN410-TPM is designed to be mounted onto any UHF Female cable base such as the RA-4.7, RA-6.0 or MGB-UHF using a 16mm hole ...
GRN430-TPM
Ground Independent UHF Flexible Whip, 420-400MHz - 350mm
The GRN410-TPM flexible UHF half wave whip antennas are designed to be robust and reliable, ideal for mining, agricultural or heavy equipment UHF communications, where damage or there is limited space. The GRN410-TPM is designed to be mounted onto any UHF Female cable base such as the RA-4.7, RA-6.0 or MGB-UHF using a ...
GRN460-TPM
Ground Independent UHF Flexible Whip, 450-470MHz - 340mm
The GRN460-TPM flexible UHF half wave whip antennas are designed to be robust and reliable, ideal for mining, agricultural or heavy equipment UHF communications, where damage or there is limited space. The GRN460-TPM is designed to be mounted onto any UHF Female cable base such as the RA-4.7, RA-6.0 or MGB-UHF using a ...
GRN480-TPM
Ground Independent UHF Flexible Whip Antenna, 470-490MHz - 330mm
The GRN480-TPM flexible UHF half wave whip antennas are designed to be robust and reliable, ideal for mining, agricultural or heavy equipment UHF communications, where damage or there is limited space. The GRN480-TPM is designed to be mounted onto any UHF Female cable base such as the RA-4.7, RA-6.0 or MGB-UHF using a ...
GRN510-TPM
Ground Independent UHF Flexible Whip Antenna, 500-520MHz - 310mm
The GRN510-TPM flexible UHF half wave whip antennas are designed to be robust and reliable, ideal for mining, agricultural or heavy equipment UHF communications, where damage or there is limited space. The GRN510-TPM is designed to be mounted onto any UHF Female cable base such as the RA-4.7, RA-6.0 or MGB-UHF using a ...
GRN570-TPM
Ground Independent UHF Flexible Whip, 500-520MHz - 425mm
The GRN570-TPM flexible UHF half wave whip antennas are designed to be robust and reliable, ideal for mining, agricultural or heavy equipment UHF communications, where damage or there is limited space. The GRN510-TPM is designed to be mounted onto any UHF Female cable base such as the RA-4.7, RA-6.0 or MGB-UHF using a ...
GRN650-TPM
Ground Independent UHF Flexible Whip Antenna, 500-520MHz - 425mm
The GRN510-TPM flexible UHF half wave whip antennas are designed to be robust and reliable, ideal for mining, agricultural or heavy equipment UHF communications, where damage or there is limited space. The GRN510-TPM is designed to be mounted onto any UHF Female cable base such as the RA-4.7, RA-6.0 or MGB-UHF using a ...
M410
UHF phased coil stainless steel whip, 400-420MHz - 700mm
The M410 phased coil UHF whip offers excellent performance, medium gain all within a flexibile, robust and lightweight design, suitable for use in either fixed position or vehicle mount UHF communications. The M410 can be mounted on any base with a 5/16"-26TPI male thread such as the OB-4.7 or MGB-OB.
M430
UHF phased coil stainless steel whip, 420-440MHz - 650mm
The M430 phase coil UHF whip offers excellent performance, medium gain all within a flexibile, robust and lightweight design, suitable for use in either fixed position or vehicle mount UHF communications. The M430 can be mounted on any base with a 5/16"-26TPI male thread such as the OB-4.7 or MGB-OB.
M460
UHF phased coil stainless steel whip, 450-470MHz - 600mm
The M460 phase coil UHF whip offers excellent performance, medium gain all within a flexibile, robust and lightweight design, suitable for use in either fixed position or vehicle mount UHF communications. The M460 can be mounted on any base with a 5/16"-26TPI male thread such as the OB-4.7 or MGB-OB, or as a ...
M480
UHF phased coil stainless steel whip, 470-490MHz - 560mm
The M480 phase coil UHF whip offers excellent performance, medium gain all within a flexibile, robust and lightweight design, suitable for use in either fixed position or vehicle mount UHF communications. The M480 can be mounted on any base with a 5/16"-26TPI male thread such as the OB-4.7 or MGB-OB, or as a ...
M510
UHF Phased Coil Stainless Steel Whip - 500-520MHz
The M510 phase coil UHF whip offers excellent performance, medium gain all within a flexibile, robust and lightweight design, suitable for use in either fixed position or vehicle mount UHF communications. The M510 can be mounted on any base with a 5/16"-26TPI male thread such as the OB-4.7 or MGB-OB, or as a ...
MB410
UHF phased coil fibreglass whip, 400-420MHz - 730mm
The MB410 phase coil UHF fibreglass whip offers excellent performance and medium gain all within a robust yet lightweight design, suitable for use in either fixed position or vehicle mount UHF communications. The MB410 can be mounted on any base with a 5/16"-26TPI male thread such as the OB-4.7 or MGB-OB, or as a ...
MB430
UHF phased coil fibreglass whip, 420-440MHz - 710mm
The MB430 phase coil UHF fibreglass whip offers excellent performance and medium gain all within a robust yet lightweight design, suitable for use in either fixed position or vehicle mount UHF communications. The MB430 can be mounted on any base with a 5/16"-26TPI male thread such as the OB-4.7 or MGB-OB, or as a ...
MB460
UHF phased coil fibreglass whip, 450-470MHz - 630mm
The MB460 phase coil UHF fibreglass whip offers excellent performance and medium gain all within a robust yet lightweight design, suitable for use in either fixed position or vehicle mount UHF communications. The MB460 can be mounted on any base with a 5/16"-26TPI male thread such as the OB-4.7 or MGB-OB, or as a ...
MB477
UHF CB Radio fibreglass whip, 477MHz - 480mm
The MB477 UHF fibreglass whip offers excellent performance within a robust yet lightweight design, suitable for use in either fixed position or vehicle mount UHF communications
MB480
UHF phased coil fibreglass whip, 470-490MHz - 600mm
The MB480 phase coil UHF fibreglass whip offers excellent performance and medium gain all within a robust yet lightweight design, suitable for use in either fixed position or vehicle mount UHF communications. The MB480 can be mounted on any base with a 5/16"-26TPI male thread such as the OB-4.7 or MGB-OB, or as a ...
MB510
UHF Phased Coil Fibreglass Whip - 500-520MHz
The MB510 phase coil UHF fibreglass whip offers excellent performance and medium gain all within a robust yet lightweight design, suitable for use in either fixed position or vehicle mount UHF communications. The MB510 can be mounted on any base with a 5/16"-26TPI male thread such as the OB-4.7 or MGB-OB, or as a ...
GRMWFC477
Ground Independent UHF Whip Antenna - 470-490MHz
The GRMWFC477 is a ground independent, half wave, end fed, UHF communications antenna suitable for either vehicle mount or fixed position locations. Fitted as standard with a FME Female for ease of installation and a FME Male to UHF Male PL259 adaptor to fit to all UHF Radios or UHF devices on the market. To Mount the ...
GRN385
UHF ground independent flexible whip, 375-395MHz - 400mm
The GRN395 flexible half wave UHF detachable whip antenna, is designed for extreme conditions where a low profile, robust and reliable antenna is required such as mining, agricultural, military and heavy industry applications. Mounting of the right-angle cable assembly requires a 16mm hole or appropriate bracket.
GRN410
Ground Indepdent UHF Detachable Whip Antenna, 400-420MHz - 360mm
The GRN410 flexible half wave UHF detachable whip antenna, is designed for extreme conditions where a low profile, robust and reliable antenna is required such as mining, agricultural, military and heavy industry applications. The detachable radiating antenna top can be removed for situations where damage or vandalism ...
GRN430
Ground Independent UHF Detachable Whip, 420-440MHz - 350mm
The GRN430 flexible half wave UHF detachable whip antenna, is designed for extreme conditions where a low profile, robust and reliable antenna is required such as mining, agricultural, military and heavy industry applications. The detachable radiating antenna top can be removed for situations where damage or vandalism ...
GRN460
UHF ground independent detachable whip, 450-470MHz - 340mm
The GRN460 flexible half wave UHF detachable whip antenna, is designed for extreme conditions where a low profile, robust and reliable antenna is required such as mining, agricultural, military and heavy industry applications. The detachable radiating antenna top can be removed for situations where damage or vandalism ...
GRN480
Ground Independent UHF Detachable Whip, 470-490MHz - 340mm
The GRN480 flexible half wave UHF detachable whip antenna, is designed for extreme conditions where a low profile, robust and reliable antenna is required such as mining, agricultural, military and heavy industry applications. The detachable radiating antenna top can be removed for situations where damage or vandalism ...
GRN510
Ground Independent UHF Detachable Whip, 500-520MHz - 310mm
The GRN510 flexible half wave UHF detachable whip antenna, is designed for extreme conditions where a low profile, robust and reliable antenna is required such as mining, agricultural, military and heavy industry applications. The detachable radiating antenna top can be removed for situations where damage or vandalism ...
GRN570
Ground independent UHF detachable whip, 555-585MHz - 425mm
The GRN570 flexible half wave UHF detachable whip antenna, is designed for extreme conditions where a low profile, robust and reliable antenna is required such as mining, agricultural, military and heavy industry applications. The detachable radiating antenna top can be removed for situations where damage or vandalism ...
GRNFC410
Ground Independent UHF fixed cable whip, 400-420MHz - 360mm
The GRNFC410 flexible half wave UHF whip antenna is suitable for situations where damage or vadalism may occur or where there are space requirements. The GRNFC410 comes standard with 4.7 metres RG58 Low Loss exiting from the bottom of the mounting section. To mount the GRNFC410 a minimum 13mm hole or appropriate ...
GRNFC430<