The PD-787162 custom frequency power divider is designed to allow antennas to be mounted in a 2 stack phased array formation such as 2 x FMCPX-78 circular polarised dipoles or 2 x FMD vertical dipole antennas, whilst maintaining optimum VSWR at better than 1.1:1, ideal for broadcasters. ZCG recommend mounting the PD-787162 power divider using the 2 x PDC-L clamps supplied for 30-50mm capability mount pole or specify mount pole diameter for a suitable mount clamp. The PD-787162 is terminated with a 7/8" EIA input which must face down when installed, and 2 7/16" DIN female outputs at the top of the unit, should face the horizon. ZCG strongly recommend applying amalgamation butyl rubber followed by PVC tape water-proofing to all terminations to stop water ingression.
Specify centre frequency
Specify 10% bandwidth around C/F
Factory at 1.1:1 VSWR
50 Ohms - nominal
4 Kilowatts - max. input
Mount with 7/8" EIA flange facing down.
Painted brass and Tri-metal plated connectors
Input: 7/8" EIA flanged, Output: 2 x 7/16" DIN female
Australian Owned & Manufactured, High Quality RF Solutions Since 1970
Experienced, Knowledgeable In-House Sales Consultants And Technical Support
Quality Certified And Reliable, Trusted Product Support