EIA
2-way power divider, specify C/F or 10% bandwidth, -26dB, 7/8″ EIA, 2 x 7/16″ DIN female, 4kW

2-way power divider, specify C/F or 10% bandwidth, -26dB, 7/8″ EIA, 2 x 7/16″ DIN female, 4kW

2-way power divider, specify centre frequency and 10% bandwidth at -26dB, 7/8" EIA, 2 x 7/16" DIN female, 4kW - incl. 2 x mount clamps

Product code: PD-787162

The PD-787162 custom frequency power divider is designed to allow antennas to be mounted in a 2 stack phased array formation such as 2 x FMCPX-78 circular polarised dipoles or 2 x FMD vertical dipole antennas, whilst maintaining optimum VSWR at better than 1.1:1, ideal for broadcasters. ZCG recommend mounting the PD-787162 power divider using the 2 x PDC-L clamps supplied for 30-50mm capability mount pole or specify mount pole diameter for a suitable mount clamp. The PD-787162 is terminated with a 7/8" EIA input which must face down when installed, and 2 7/16" DIN female outputs at the top of the unit, should face the horizon. ZCG strongly recommend applying amalgamation butyl rubber followed by PVC tape water-proofing to all terminations to stop water ingression.

download brochure

Specifications

Frequency

Specify centre frequency

Bandwidth

Specify 10% bandwidth around C/F

Tuning

Factory at 1.1:1 VSWR

Impedance

50 Ohms - nominal

Maximum Power

4 Kilowatts / 4000 Watts

Polarisation

Mount with 7/8" EIA flange facing down.

Construction

Black powdercoat finish outer body, solid brass inner lines, PTFE insulator supports and tri-metal plated terminations - can be supplied in alternate colours on special request