EIA
6-way scaled power divider, specify centre frequency and 10% at -26dB, 7/8″ EIA flanged input/ 6 outputs, 5kW – no clamps included

6-way scaled power divider, specify centre frequency and 10% at -26dB, 7/8" EIA flanged input/ 6 outputs, 5kW - no clamps included

Product code: PD-78786

The PD-78786 6-way power divider is designed to allow antennas to be mounted in a high gain 6-stack phased array formation, whilst maintaining optimum VSWR, ideal for broadcasters. Mount the PD-78786 6-way custom frequency power divider with the single 7/8" EIA connector facing down. Water/dust ingression protection of 1-2 layers of self-amalgamating butyl rubber tape and a top layer of uPVC tape should be applied to all terminations once installed. Please note: mount clamps are not included, consult ZCG for suitable clamps for your mount pole.

download brochure

Specifications

Frequency

Specify centre frequency when ordering

Bandwidth

Specify 10% bandwidth around C/F

Tuning

Factory at 1.1:1 VSWR

Impedance

50 Ohms - nominal

Maximum Power

5 Kilowatts - max. input

Polarisation

Install with single 7/8" EIA flanged facing down

Construction

Black powdercoated finished brass outer body, solid machined brass innerline, PTFE insulator supports and silver plated joining bullet - can be supplied in alternate colours on special request